Trend Snappy Drill System

The Trend Snappy system is a revolutionary quick-release drilling system that is designed to make changing between drilling attachments simple and fast, to significantly increase productivity when drilling and fixing on site and in workshops.

The Trend Snappy system comprises of a Quick Chuck that can be fitted to a drill to allow for quick interchanging between attachments. The Quick Chuck is spring loaded and the various parts can simply be snapped into place and are held until the sleeve is pulled back and the part is released.

This quick-change drilling system is designed to be used with power drills and screwdrivers, as well as direct drive ¼” hex shank power bits. The huge range of different attachments available for this system makes it the most comprehensive range of quick-change tooling on the market today and it's a favourite with professional tradesmen and DIY home users.

Back top top

1-25 of 48

Page:
  1. 1
  2. 2
  1. Trend SNAP/PC12/SET Snappy plug cutter No 12 screw set
    SKU: SNAP/PC12/SET

    Trend SNAP/PC12/SET Snappy plug cutter No 12 screw set

    Plug cutter No12 set

    £26.06 Excl. VAT £31.27 Incl. VAT

    Shank Diameter=1/4 inch hex  
  2. Trend SNAP/PC8/SET Snappy plug cutter No 8 screw set
    SKU: SNAP/PC8/SET

    Trend SNAP/PC8/SET Snappy plug cutter No 8 screw set

    Plug cutter No8 set

    £23.56 Excl. VAT £28.27 Incl. VAT

    Shank Diameter=1/4 inch hex  
  3. Trend SNAP/PC10/SET Snappy plug cutter No 10 screw set
    SKU: SNAP/PC10/SET

    Trend SNAP/PC10/SET Snappy plug cutter No 10 screw set

    Plug cutter No10 set

    £23.56 Excl. VAT £28.27 Incl. VAT

    Shank Diameter=1/4 inch hex  
  4. Trend SNAP/PC6/SET Snappy plug cutter No 6 screw set
    SKU: SNAP/PC6/SET

    Trend SNAP/PC6/SET Snappy plug cutter No 6 screw set

    Plug cutter No6 set

    £23.56 Excl. VAT £28.27 Incl. VAT

    Shank Diameter=1/4 inch hex
  5. Trend SNAP/ASA/2 Snappy Angle Screwdriver (mark 2)
    SKU: SNAP/ASA/2

    Trend SNAP/ASA/2 Snappy Angle Screwdriver (mark 2)

    Screwdriver attachment for access to tight corners

    £33.40 Excl. VAT £40.08 Incl. VAT

    Dimensions overall length=145 mm  Shank Diameter=1/4 inch hex  Width=50 mm  Width with insert bit fitted=61 mm  Body diameter=28 mm  Bit centre to top of tool=14.5 mm  Maximum torque=60 Nm torque (612 kgf cm)  
  6. Trend SNAP/ASA/3 Snappy angle screwdriver attachment
    SKU: SNAP/ASA/3

    Trend SNAP/ASA/3 Snappy angle screwdriver attachment

    Compact Screwdriver attachment

    £33.40 Excl. VAT £40.08 Incl. VAT

    Dimensions Overall length=136 mm  Shank Diameter=1/4 inch hex  Width=33 mm  Width with 17mm insert bit fitted=39.5 mm  Body diameter=24/32/42 mm  Bit centre to top of tool=12 mm  Maximum torque=49 Nm torque
  7. Trend SNAP/PC/16T Snappy tube plug cutter 16 mm
    £19.55 Excl. VAT £23.46 Incl. VAT

    Shank Diameter=1/4 inch hex  Plug size=5/8 inch  Plug size=16 mm  
  8. Trend SNAP/SB4/SET Snappy screwdriver bit set 41pcs
    £26.73 Excl. VAT £32.08 Incl. VAT

    Shank Diameter=1/4 inch hex  Shank Diameter=5/32 inch hex  
  9. Trend SNAP/SB3/SET Snappy screwdriver bit set 56pcs
    £22.58 Excl. VAT £27.10 Incl. VAT

    Shank Diameter=1/4 inch hex  
  10. Trend SNAP/SR/2 Snappy step reamer taps M4 M6 M10
    £19.55 Excl. VAT £23.46 Incl. VAT

    Shank Diameter=1/4 inch hex  Tap sizes=M4, M6, M10
  11. Trend SNAP/SD/1 Snappy step drill 4mm to 12mm
    SKU: SNAP/SD/1

    Trend SNAP/SD/1 Snappy step drill 4mm to 12mm

    Trend Snappy step drill

    £21.55 Excl. VAT £25.86 Incl. VAT

    D=4 mm  D2=6 mm  D3=8 mm  D4=10 mm  D5=12 mm  Shank Diameter=1/4 inch hex  
  12. Trend SNAP/TD/2 Snappy taper drill 3mm to 14mm
    SKU: SNAP/TD/2

    Trend SNAP/TD/2 Snappy taper drill 3mm to 14mm

    For drilling and enlarging holes

    £15.07 Excl. VAT £18.08 Incl. VAT

    Shank Diameter=1/4 inch hex  Plastics up to 2 mm thick  Man-made boards & wood up to 6 mm thick  Enlargement=3 mm to 14 mm  
  13. Trend SNAP/TD/1 Snappy taper drill 3mm to 7mm
    SKU: SNAP/TD/1

    Trend SNAP/TD/1 Snappy taper drill 3mm to 7mm

    For drilling and enlarging holes

    £16.71 Excl. VAT £20.05 Incl. VAT

    Shank Diameter=1/4 inch hex  Plastics up to 2 mm thick  Man-made boards & wood up to 6 mm thick  Enlargement=3 mm to 7 mm
  14. Trend SNAP/FS/30 Snappy forstner 30mm
    SKU: SNAP/FS/30

    Trend SNAP/FS/30 Snappy forstner 30mm

    Short forstner bits for drilling accurate holes

    £15.18 Excl. VAT £18.22 Incl. VAT

    D=30 mm  OL=80 mm  Shank Diameter=1/4 inch hex  
  15. Trend SNAP/FS/35 Snappy forstner 35mm
    SKU: SNAP/FS/35

    Trend SNAP/FS/35 Snappy forstner 35mm

    Short forstner bits for drilling accurate holes

    £15.18 Excl. VAT £18.22 Incl. VAT

    D=35 mm  OL=80 mm  Shank Diameter=1/4 inch hex  
  16. Trend SNAP/FS/32 Snappy forstner 32mm
    SKU: SNAP/FS/32

    Trend SNAP/FS/32 Snappy forstner 32mm

    Short forstner bits for drilling accurate holes

    £15.18 Excl. VAT £18.22 Incl. VAT

    D=32 mm  OL=80 mm  Shank Diameter=1/4 inch hex  
  17. Trend SNAP/FS1/SET Snappy 5 pc forstner set 15-35mm
    SKU: SNAP/FS1/SET

    Trend SNAP/FS1/SET Snappy 5 pc forstner set 15-35mm

    Five piece forstner set

    £63.89 Excl. VAT £76.67 Incl. VAT

    Overall length=80 mm  Shank Diameter=1/4 inch hex  
  18. Trend SNAP/TH1/SET Snappy tool holder 30 piece bit set
    £39.00 Excl. VAT £46.80 Incl. VAT

    Size=140 mm x 165 mm  Screw pouch=1  Tools up to 155 mm=10  Tools up to 80 mm=7   Screwdriver insert bits=12  Quick chucks=1   Belt strap=1     
  19. Trend SNAP/TH2/SET Snappy tool holder 60 piece bit set
    £76.44 Excl. VAT £91.73 Incl. VAT

    Size=300 mm x 165 mm  Tools up to 155 mm=20  Tools up to 80 mm=15   Screwdriver insert bits=23  Quick chucks=2   Belt strap=2     
  20. Trend SNAP/TH3/SET Snappy tool holder 60 piece Impact Driver
    £36.71 Excl. VAT £44.05 Incl. VAT

    Size=300 mm x 165 mm  Tools up to 155 mm=20  Tools up to 80 mm=15   Screwdriver insert bits=23  Belt strap=2
  21. Trend SNAP/PC/A Snappy 4 Piece Set Countersink Set
    £26.54 Excl. VAT £31.85 Incl. VAT

    Shank Diameter=1/4 inch hex  Screw size=No.8  Screw size=No.10  
  22. Trend Snappy 4 Piece Set Countersink & Tube Plug cutter Set
    £32.26 Excl. VAT £38.71 Incl. VAT

    No.8 drill/countersink  D=3/8 inch  D=9.5 mm  D2=7/64 inch  D2=2.75 mm  No.10 drill/countersink  D=1/2 inch  D=12.7 mm  D2=1/8 inch  D2=3.2 mm  Shank Diameter=1/4 inch hex  Screw size=No.8  Screw size=No.10
  23. Trend Snappy Centrotec dril bit guide 7/64 2.75mm
    SKU: SNAP/F/DBG7

    Trend Snappy Centrotec dril bit guide 7/64 2.75mm

    Centrotec drill bit guides

    £15.68 Excl. VAT £18.82 Incl. VAT

    D=7/64 inch  D=2.75 mm  Shank Diameter=Centrotec Compatible  Screw size=No.8   
  24. Trend Snappy Centrotec dril bit guide 9/64 3.5mm
    SKU: SNAP/F/DBG9

    Trend Snappy Centrotec dril bit guide 9/64 3.5mm

    Centrotec drill bit guides

    £15.68 Excl. VAT £18.82 Incl. VAT

    D=9/64 inch  D=3.5 mm  Shank Diameter=Centrotec Compatible  Screw size=No.10  
  25. Trend Snappy Centrotec quick chuck only
    SKU: SNAP/F/QC

    Trend Snappy Centrotec quick chuck only

    Centrotec shank quick chuck

    £16.51 Excl. VAT £19.81 Incl. VAT

    Chuck dia=23 mm  Overall length=60 mm  Shank Diameter=Centrotec Compatible  Delivery=UK & Eire only

Back top top

1-25 of 48

Page:
  1. 1
  2. 2
Contact Us