WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

11 Item(s)

  1. Trend SM/MKP Scribe-Master Quick Mount Kit
    £31.41 Excl. VAT £37.69 Incl. VAT

    Mitre saw stand requirements  Mounting brackets with slots to accept 8mm bolts.  SM/PRO mounting bracket hole positions  Centre to centre (D)=195 mm to 280mm  Centre to centre (W)=399 mm  
  2. Trend TEMP/SSD/5MM Template shelf support drill bit guide
    £33.24 Excl. VAT £39.89 Incl. VAT

    Drill diameter=5 mm
  3. Trend RBT/PLATE Routabout template only RBT-Plate
    £30.31 Excl. VAT £36.37 Incl. VAT

  4. Trend INLAY/KIT/A Inlay kit with 3.2mm cutter 1/4 Solid tungsten
    £30.96 Excl. VAT £37.15 Incl. VAT

    Guide bush ID=4.8 mm  Guide bush OD=7.9 mm  Collar OD=14.28 mm  Cutter D=1/8 inch  Cutter D=3.2 mm  Cutter C=1/2 inch  Cutter C=12.7 mm  Cutter OL=50.8 mm  Shank Diameter=1/4 inch
  5. TREND D/SKATE/A DOOR SKATE
    £35.31 Excl. VAT £42.37 Incl. VAT

  6. Trend VJS/PCK/L Varijig ex-long pivot clamp (pair)
    £30.31 Excl. VAT £36.37 Incl. VAT

    Clamp thickness max.=51 mm
  7. Trend VJS/CK Varijig system clamp kit (Pair)
    £31.90 Excl. VAT £38.28 Incl. VAT

    Clamp thickness max.=32mm
  8. Trend ELLIPSEJ/1 Extension bar 500mm x 12.7mm
    £36.86 Excl. VAT £44.23 Incl. VAT

    500 mm x 12.7 mm
  9. Trend CRB/TB CRB trimming base
    SKU: CRB/TB

    Trend CRB/TB CRB trimming base

    Combination router base trim base

    £32.80 Excl. VAT £39.36 Incl. VAT

    Lipping width with copy follower max.=16 mm  Lipping width without copy follower max.=25 mm  Lipping projection max.=6 mm  Cutter diameter max.=25 mm  Length=210 mm  Width=65 mm  Thickness=7 mm
  10. Trend OFS/BASE Offset router base
    £36.61 Excl. VAT £43.93 Incl. VAT

    Size=280 x 180 x8 mm  Aperture dia.=40 mm  Max. cutter dia.=36 mm
  11. Trend CASE/1001 Carry case for KWJ700/900 and COMBI1002
    £34.85 Excl. VAT £41.82 Incl. VAT

    Length outside=1250 mm  Height ouside=415 mm

Back top top

11 Item(s)

Contact Us