WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

6 Item(s)

  1. Trend TEMP/LN57X8MM Letter number cutter/Bush pack1
    £15.56 Excl. VAT £18.67 Incl. VAT

  2. Trend TEMP/LN57X1/4 Letter number cutter/Bush pack2
    £15.56 Excl. VAT £18.67 Incl. VAT

  3. Trend TEMP/PD/R/E Template panel door set rad 316mm
    £15.11 Excl. VAT £18.13 Incl. VAT

    D=425 mm  D2=335 mm  C=102 mm  R=316 mm  Door width possible=515 to 555 mm  
  4. Trend TEMP/PD/R/F Template panel door set rad 372mm
    £13.33 Excl. VAT £16.00 Incl. VAT

    Out of stock

    D=470 mm  D2=398 mm  C=102 mm  R=372 mm  Door width possible=565 to 600 mm
  5. Trend TEMP/PD/R/G Template Panel Door Set Rad 400mm
    £15.11 Excl. VAT £18.13 Incl. VAT

    D=526 mm  D2=440 mm  C=102 mm  R=400 mm  Door width possible=620 to 660 mm
  6. Trend TEMP/PD/R/D Template panel door set rad 264mm
    £13.91 Excl. VAT £16.69 Incl. VAT

    D=376 mm  D2=310 mm  C=102 mm  R=264 mm  Door width possible=470 to 510 mm

Back top top

6 Item(s)

Contact Us