JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 36

Page:
  1. 1
  2. 2
  1. Trend DWL/3/50 Dowels 8 x 40mm 50 off
    SKU: DWL/3/50

    Trend DWL/3/50 Dowels 8 x 40mm 50 off

    Dowels grooved

    £1.95 Excl. VAT £2.34 Incl. VAT

    D=8 mm  Overall length=40 mm  
  2. Trend DWL/C/PK1 Dowel centre points 6, 8, 10mm x 2 (6pk)
    £2.45 Excl. VAT £2.94 Incl. VAT

    Dia=6 mm  Dia=8 mm  Dia=10 mm
  3. Trend EB/PC/3 Easibolt connecting bolt 3 pack
    SKU: EB/PC/3

    Trend EB/PC/3 Easibolt connecting bolt 3 pack

    Easibolt Worktop Connector Clips

    £2.62 Excl. VAT £3.14 Incl. VAT

    Total length=150 mm  To suit bolt slot width=14.5 mm  To suit bolt slot width=31.5 mm
  4. Trend SP-TUBE/01 Storage tube 50mm x 20mm clear
    £1.44 Excl. VAT £1.73 Incl. VAT

    Size=50 mm x 20 mm
  5. Trend BUSH/600 Bush for COMBI600 alloy 20mm 1 off
    £3.28 Excl. VAT £3.94 Incl. VAT

    Out of stock

    Diameter= 20 mm  Overall length=37 mm  Pin length=9 mm  Pin diameter=10 mm  Min. jig thickness=10 mm  Suits jig=COMBI600, TT/KWJ600
  6. Trend SPAN/12 Spanner 12mm A/F forged
    £3.80 Excl. VAT £4.56 Incl. VAT

    12 mm A/F
  7. Trend PUSHBLOCK/3 Pushblock3
    SKU: PUSHBLOCK/3

    Trend PUSHBLOCK/3 Pushblock3

    £2.18 Excl. VAT £2.62 Incl. VAT

    Size=210 mm x128 mm
  8. Trend WP-RTI/03 Lead on pin for RTI/Plate
    £1.65 Excl. VAT £1.98 Incl. VAT

  9. Trend DWL/5/50 Dowels 10 x 50mm 50 off
    SKU: DWL/5/50

    Trend DWL/5/50 Dowels 10 x 50mm 50 off

    Dowels grooved

    £3.28 Excl. VAT £3.94 Incl. VAT

    D=10 mm  Overall length=50 mm  
  10. Trend DWL/4/50 Dowels 10 x 35mm 50 off
    SKU: DWL/4/50

    Trend DWL/4/50 Dowels 10 x 35mm 50 off

    Dowels grooved

    £2.46 Excl. VAT £2.95 Incl. VAT

    D=10 mm  Overall length=35 mm  
  11. Trend DWL/1/50 Dowels 6 x 30mm 50 off
    SKU: DWL/1/50

    Trend DWL/1/50 Dowels 6 x 30mm 50 off

    Dowels grooved

    £1.95 Excl. VAT £2.34 Incl. VAT

    D=6 mm  Overall length=30 mm  
  12. Trend DWL/2/50 Dowels 8 x 30mm 50 off
    SKU: DWL/2/50

    Trend DWL/2/50 Dowels 8 x 30mm 50 off

    Dowels grooved

    £1.95 Excl. VAT £2.34 Incl. VAT

    D=8 mm  Overall length=30 mm  
  13. Trend SS/B5/12 Shelf support Brass Plated 12 off
    £2.46 Excl. VAT £2.95 Incl. VAT

    Pin=5 mm  Overall length=23 mm  Load capacity=100kg    Load capacity applies to four shelf supports being evenly distributed
  14. Trend SS/M5/12 Shelf support metal 5mm 12 off
    £2.46 Excl. VAT £2.95 Incl. VAT

    Pin=5 mm  Overall length=16.5 mm  
  15. Trend SS/P5/12 Shelf support plastic 5mm 12 off
    £2.46 Excl. VAT £2.95 Incl. VAT

    Pin=5 mm  Load capacity=100kg
  16. Trend PJ/1 Spacer set
    £2.18 Excl. VAT £2.62 Incl. VAT

    Thickness=3 mm  Bore size=8 mm  
  17. Trend PJ/FBK Clamp bolt fixing kit (3)
    £2.18 Excl. VAT £2.62 Incl. VAT

  18. Trend CJ/ORS COMBI Jig O ring set 5 pack
    £1.65 Excl. VAT £1.98 Incl. VAT

  19. Trend CLT/NUT/T4 Collet nut for T4
    £3.60 Excl. VAT £4.32 Incl. VAT

    D=17 (A/F) mm  Thread=M15x1.0mm  
  20. Trend CLT/NUT/T3 Collet nut for T3
    £3.60 Excl. VAT £4.32 Incl. VAT

    D=17 (A/F) mm  Thread=M15x1.0mm
  21. Trend GB/03 Gb M5 fixing pack for DW613 (5 Pairs)
    £1.95 Excl. VAT £2.34 Incl. VAT

  22. Trend GB/02 Gb/5 screws M6X16 pan pack of ten
    £1.95 Excl. VAT £2.34 Incl. VAT

    M6 X 16 mm  
  23. Trend GB/01 Gb screws 2BA x1/4 pack of ten
    £2.46 Excl. VAT £2.95 Incl. VAT

    2BA X 1/4 inch
  24. Trend FIX/KIT/3 Fixing kit Unibase pan head screw
    £2.44 Excl. VAT £2.93 Incl. VAT

  25. Trend FIX/KIT/1 Fixing kit subbases pan head screw
    £2.44 Excl. VAT £2.93 Incl. VAT

Back top top

1-25 of 36

Page:
  1. 1
  2. 2
Contact Us