JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 44

Page:
  1. 1
  2. 2
  1. Trend CRB/SF CRB side fence
    SKU: CRB/SF

    Trend CRB/SF CRB side fence

    Combination router base side fence

    £14.65 Excl. VAT £17.58 Incl. VAT

    Length=270 mm  Width=35 mm  Thickness=15 mm  Cutter diameter max.=30 mm
  2. Trend C/CHISEL Corner chisel HSS
    £12.60 Excl. VAT £15.12 Incl. VAT

    Length = 70 mm  Width = 29 mm  Weight = 100 g
  3. Trend D/LIFT/A Door lifter
    £14.65 Excl. VAT £17.58 Incl. VAT

    Weight=303 g  Lifts to height=38 mm  Maximum door weight=108 kg  Size=254 mm x 44 mm x 75 mm
  4. Trend CST/635/PK1 Cutter storage tray 1/4 inch 4 pack
    £10.06 Excl. VAT £12.07 Incl. VAT

    Out of stock

    Length=108 mm  Width=79 mm  Height=20 mm
  5. Trend CST/127/PK1 Cutter storage tray 1/2 inch 4 pack
    £10.06 Excl. VAT £12.07 Incl. VAT

    Out of stock

    Length=108 mm  Width=79 mm  Height=20 mm
  6. Trend CASE/T4 Carry case for T4 router
    £12.60 Excl. VAT £15.12 Incl. VAT

    Size=415 mm x 290 mm x 140 mm
  7. Trend RTI/SHIELD RTI/Plate Eye and Face shield
    £14.38 Excl. VAT £17.26 Incl. VAT

    Height from plate= 28.5mm
  8. Trend PRESSURE/2 Side finger pressure assembly
    £13.33 Excl. VAT £16.00 Incl. VAT

  9. Trend DWL/1/500 Dowels 6 x 30mm 500 off
    SKU: DWL/1/500

    Trend DWL/1/500 Dowels 6 x 30mm 500 off

    Dowels grooved

    £13.33 Excl. VAT £16.00 Incl. VAT

    D=6 mm  Overall length=30 mm  
  10. Trend TEMP/PD/R/E Template panel door set rad 316mm
    £13.33 Excl. VAT £16.00 Incl. VAT

    D=425 mm  D2=335 mm  C=102 mm  R=316 mm  Door width possible=515 to 555 mm  
  11. Trend TEMP/PD/R/B Template panel door set rad 183mm
    £11.92 Excl. VAT £14.30 Incl. VAT

    Out of stock

    D=275 mm  D2=207 mm  C=102 mm  R=183 mm  Door width possible=370 to 420 mm  
  12. Trend TEMP/PD/R/F Template panel door set rad 372mm
    £13.33 Excl. VAT £16.00 Incl. VAT

    D=470 mm  D2=398 mm  C=102 mm  R=372 mm  Door width possible=565 to 600 mm
  13. Trend TEMP/PD/R/G Template Panel Door Set Rad 400mm
    £13.33 Excl. VAT £16.00 Incl. VAT

    D=526 mm  D2=440 mm  C=102 mm  R=400 mm  Door width possible=620 to 660 mm
  14. Trend TEMP/PD/R/D Template panel door set rad 264mm
    £12.27 Excl. VAT £14.72 Incl. VAT

    D=376 mm  D2=310 mm  C=102 mm  R=264 mm  Door width possible=470 to 510 mm
  15. Trend TEMP/LN57X1/4 Letter number cutter/Bush pack2
    £13.33 Excl. VAT £16.00 Incl. VAT

  16. Trend TEMP/LN57X8MM Letter number cutter/Bush pack1
    £13.33 Excl. VAT £16.00 Incl. VAT

  17. Trend Hot rod 100mm Stainless Steel one off
    SKU: HR/100

    Trend Hot rod 100mm Stainless Steel one off

    Stainless Steel hot rod

    £10.99 Excl. VAT £13.19 Incl. VAT

    Overall length=100 mm  Diameter=12 mm  
  18. Trend Hot rod 200mm Stainless Steel one off
    SKU: HR/200

    Trend Hot rod 200mm Stainless Steel one off

    Stainless Steel hot rod

    £13.15 Excl. VAT £15.78 Incl. VAT

    Overall length=200 mm  Diameter=12 mm  
  19. Trend CLT/SLV/463 Collet sleeve 4mm to 6.35mm
    SKU: CLT/SLV/463

    Trend CLT/SLV/463 Collet sleeve 4mm to 6.35mm

    Collet sleeves

    £11.41 Excl. VAT £13.69 Incl. VAT

  20. Trend CTI/80/PK1 Cable tidy insert light grey 80mm
    SKU: CTI/80/PK1

    Trend CTI/80/PK1 Cable tidy insert light grey 80mm

    Plastic cable tidy inserts

    £10.06 Excl. VAT £12.07 Incl. VAT

    Size=80 mm  Colour=Light grey
  21. Trend CTI/80/PK3 Cable tidy insert black 80mm
    SKU: CTI/80/PK3

    Trend CTI/80/PK3 Cable tidy insert black 80mm

    Plastic cable tidy inserts

    £10.06 Excl. VAT £12.07 Incl. VAT

    Size=80 mm  Colour=Black
  22. Trend CTI/80/PK2 Cable tidy insert brown 80mm
    SKU: CTI/80/PK2

    Trend CTI/80/PK2 Cable tidy insert brown 80mm

    Plastic cable tidy inserts

    £10.06 Excl. VAT £12.07 Incl. VAT

    Size=80 mm  Colour=Brown
  23. Trend CLT/T5/635 Collet T5 router 6.35mm (1/4)
    £13.56 Excl. VAT £16.27 Incl. VAT

    Out of stock

    d=1/4 inch  d=6.35 mm  
  24. Trend FHA/009 Fine height adjuster T4 & FBF-850
    £12.18 Excl. VAT £14.62 Incl. VAT

    Thread size=M5  Overall length=230 mm
  25. Trend FHA/001 Fine height adjuster for T3, T5, MOF 96 + Others
    £13.33 Excl. VAT £16.00 Incl. VAT

    Thread size=M5

Back top top

1-25 of 44

Page:
  1. 1
  2. 2
Contact Us