JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 52

Page:
  1. 1
  2. 2
  3. 3
  1. Trend PC/50/M Panel butt connectors 50
    SKU: PC/50/M

    Trend PC/50/M Panel butt connectors 50

    Worktop Connectors 150 mm OL

    £35.13 Excl. VAT £42.16 Incl. VAT

    Total length=150 mm
  2. Trend PC/65/50 Panel butt connectors 65mm (50)
    SKU: PC/65/50

    Trend PC/65/50 Panel butt connectors 65mm (50)

    Worktop Connectors 65 mm OL

    £26.48 Excl. VAT £31.78 Incl. VAT

    Total length=65 mm  
  3. Trend TEMP/BH/A Template butt hinge
    £36.15 Excl. VAT £43.38 Incl. VAT

    Size= 214 mm x 135 mm x 8 mm  Door thickness min.=34 mm  Door thickness max.=44 mm  Hinge recess length=75 mm  Hinge recess length=100 mm  
  4. Trend CASE/T10 Carry case T10 router
    £36.15 Excl. VAT £43.38 Incl. VAT

    Size=390 mm x 295 mm x 240 mm
  5. Trend BSC/20/1000 Biscuit No 20 1000 off
    £26.69 Excl. VAT £32.03 Incl. VAT

    Size=60 mm x 23 mm x 4 mm  For board thickness=19 mm+  
  6. Trend AQ63/B/25 Aqua 63 style brown 25M
    £33.49 Excl. VAT £40.19 Incl. VAT

    Colour=Brown  Length=25m  Seal size excl barb=6.9mmx6.5mm
  7. Trend AQ63/W/25 Aqua 63 style white 25M
    £33.49 Excl. VAT £40.19 Incl. VAT

    Colour=White  Length=25m  Seal size excl barb=6.9mmx6.5mm
  8. Trend SMC/02X1/4HSS Scribe-Master cutter 4x40x100mm x 1/4 HSS
    SKU: SMC/02X1/4HSS

    Trend SMC/02X1/4HSS Scribe-Master cutter 4x40x100mm x 1/4 HSS

    Scribemaster cutter for softwood

    £27.08 Excl. VAT £32.50 Incl. VAT

    D=4 mm  C=40 mm  OL=100 mm  Shank Diameter=1/4 inch  For use on softwood and MDF*  *The abrasive nature of MDF will lead to premature tool wear.
  9. Trend SM/BP Scribe-Master Pro carry case
    £27.08 Excl. VAT £32.50 Incl. VAT

    Size=655mm x 420mm  To fit into the case the feet of the jig will need to be removed.
  10. Trend TEMP/PFP/A Template picture frame and plaque set
    £29.69 Excl. VAT £35.63 Incl. VAT

    Frame Sizes=7" x 9"   Plaque Sizes=3" x 2"  Frame Sizes=5" x 7"  Plaque Sizes=5" x 3 1/2"  Frame Sizes=3 1/2" x 5"  Plaque Sizes=5 29/32" x 4 3/8" *  Frame Sizes=6 29/32" x 8 29/32"
  11. Trend TEMP/LUC/57 Template set letters 57mm uppercase
    £36.87 Excl. VAT £44.24 Incl. VAT

    Size=396 x 110 x 5 mm
  12. Trend SM/TSP Scribe-Master Tenon Slide Plate
    £36.12 Excl. VAT £43.34 Incl. VAT

    Max. working length=190 mm  Max. tenon length adj.=50 mm  Max. cutter dia.=22 mm
  13. Trend SMC/03X8MMHSS Scribe-Master cutter 4x40x90mm x 8mm HSS
    SKU: SMC/03X8MMHSS

    Trend SMC/03X8MMHSS Scribe-Master cutter 4x40x90mm x 8mm HSS

    Scribemaster cutter for hardwood

    £29.78 Excl. VAT £35.74 Incl. VAT

    D=4 mm  C=40 mm  OL=90 mm  Shank Diameter=8 mm  For use on hardwood
  14. Trend TEMP/SCM/A Self centering mortise base
    £32.45 Excl. VAT £38.94 Incl. VAT

    Size=170 mm x 8 mm  Max. material width=110 mm  Max. cutter dia.=16 mm
  15. Trend VJS/CK/L Varijig system Ex long clamp (Pair)
    £31.85 Excl. VAT £38.22 Incl. VAT

    Clamp thickness max.=51mm
  16. Trend TEMP/LB/A Template letterbox
    £36.15 Excl. VAT £43.38 Incl. VAT

    Template size=326 mm x 290 mm x 8 mm  Letterbox plate sizes  220 mm x 50 mm  210 mm x 60 mm  200 mm x 60 mm
  17. Trend MT/DUSTKIT MT/JIG dust kit
    £28.40 Excl. VAT £34.08 Incl. VAT

    Dust spout aperture=58 mm (2-1/4 inch)  Adaptor OD=58 mm (2-1/4 inch)  Adaptor ID=35 mm (for 39 mm OD hose)  
  18. Trend PJ/CL/S Clamp for COMBI Jig short and bolt
    £37.29 Excl. VAT £44.75 Incl. VAT

  19. Trend M/RBT/2 Mini Routabout 18mm x 1/2" Shank
    £37.22 Excl. VAT £44.66 Incl. VAT

    Out of stock

  20. Trend M/RBT/C/10 Mini Routabout Cover 10Pk 118mm Dia
    £28.21 Excl. VAT £33.85 Incl. VAT

    Out of stock

    D=118 mm  Max. load capacity on cover= 380kg
  21. Trend RBT/CUT/1 Routabout Cutter 18mm Floor 1/4" Shank
    £35.65 Excl. VAT £42.78 Incl. VAT

    Shank Diameter=1/4 inch  For use on 18 mm floor thickness
  22. Trend RBT/CUT/2 Routabout Cutter 18mm Floor 1/2" Shank
    £35.65 Excl. VAT £42.78 Incl. VAT

    Shank Diameter=1/2 inch  For use on 18 mm floor thickness
  23. Trend RBTRNG18/10 Routabout Ring Set 18mm 10 Off
    £36.24 Excl. VAT £43.49 Incl. VAT

    Max. load capacity=200 kg
  24. Trend TEMP/CTI/A Template cable tidy insert
    £31.85 Excl. VAT £38.22 Incl. VAT

    Size=325 x 290 x 8 mm
  25. Trend CLT/T9/635 Collet T9 router 6.35mm (1/4)
    £26.51 Excl. VAT £31.81 Incl. VAT

    d=1/4 inch  d=6.35 mm  

Back top top

1-25 of 52

Page:
  1. 1
  2. 2
  3. 3
Contact Us