JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 50

Page:
  1. 1
  2. 2
  1. Trend CDJ300/03 Craft dovetail 300mm 8mm comb box
    £45.29 Excl. VAT £54.35 Incl. VAT

    Material thickness.=8 mm - 15 mm  Material width up to=300 mm  
  2. Trend CDJ300/02 Craft dovetail 300mm 1/2 comb box
    £45.29 Excl. VAT £54.35 Incl. VAT

    Material thickness.=8 mm - 20 mm  Material width up to=300 mm  
  3. Trend CDJ300/01 Craft dovetail 300mm 1/4 half blind
    £42.62 Excl. VAT £51.14 Incl. VAT

    Material thickness.=8 mm - 12 mm  Material width up to=300 mm  
  4. Trend CDJ600/02 Craft dovetail 600mm 1/2 comb box
    £50.34 Excl. VAT £60.41 Incl. VAT

    Material thickness.=8 mm - 20 mm  Material width up to=600 mm  
  5. Trend CDJ600/01 Craft dovetail 600mm 1/4 half blind
    £49.09 Excl. VAT £58.91 Incl. VAT

    Material thickness.=8 mm - 12 mm  Material width up to=600 mm  
  6. Trend CRB Combination router base
    £56.82 Excl. VAT £68.18 Incl. VAT

  7. Trend ZIP/170/25 Zipbolt 170mm pack of 25
    SKU: ZIP/170/25

    Trend ZIP/170/25 Zipbolt 170mm pack of 25

    Zipbolt Worktop Connectors

    £50.72 Excl. VAT £60.86 Incl. VAT

    Total length=170 mm  
  8. Trend PC/65/100 Panel butt connectors 65mm (100)
    SKU: PC/65/100

    Trend PC/65/100 Panel butt connectors 65mm (100)

    Worktop Connectors 65 mm OL

    £48.00 Excl. VAT £57.60 Incl. VAT

    Total length=65 mm  
  9. Trend HR/JIG Hot Rod JIg
    £51.06 Excl. VAT £61.27 Incl. VAT

    Groove pitch=50.0 mm  Groove length=100, 200, 300 and 400 mm  Length=700 mm  Width=390 mm  Thickness=12 mm  Weight=3.5 kg
  10. Trend D/STAND/A Door holder stand
    £38.94 Excl. VAT £46.73 Incl. VAT

    Maximum door thickness=55 mm  Minimum door thickness=32 mm  Maximum door weight=50 kg  Weight=2.2 kg
  11. Trend NVRS/2/115V No volt release switch 115V
    £55.35 Excl. VAT £66.42 Incl. VAT

    Out of stock

    Voltage=115v  Plug=16amp   Max. load=12amp
  12. Trend NVRS/2/240V No volt release switch 240V
    £46.24 Excl. VAT £55.49 Incl. VAT

    Voltage=240v  Plug=13amp   Max. load=12amp
  13. Trend NVRS/2/230V/E No volt release switch 230V Euro
    £44.02 Excl. VAT £52.82 Incl. VAT

    Voltage=230v  Plug=13amp   Max. load=12amp
  14. Trend PUSHBLOCK/4 Pushblock4
    SKU: PUSHBLOCK/4

    Trend PUSHBLOCK/4 Pushblock4

    £45.29 Excl. VAT £54.35 Incl. VAT

    Out of stock

  15. Trend AQ21/B/25 Aqua 21 style brown 25M
    £51.76 Excl. VAT £62.11 Incl. VAT

    Colour=Brown  Length=25m  Seal size excl barb=11.5mmx9.8mm
  16. Trend AQ21/W/25 Aqua 21 style white 25M
    £51.76 Excl. VAT £62.11 Incl. VAT

    Colour=White  Length=25m  Seal size excl barb=11.5mmx9.8mm
  17. Trend AQ109/B/25 Aqua 109 & P11 style brown 25M
    £50.52 Excl. VAT £60.62 Incl. VAT

    Colour=Brown  Length=25m  Seal size excl barb=11mmx6.8mm
  18. Trend AQ109/W/25 Aqua 109 & P11 style white 25M
    £50.52 Excl. VAT £60.62 Incl. VAT

    Colour=White  Length=25m  Seal size excl barb=11mmx6.8mm
  19. Trend TEMP/COR/A Template corner hole
    £38.33 Excl. VAT £46.00 Incl. VAT

    Size=290 x 290 x 8 mm
  20. Trend TEMP/TRKX8MM Template Timber Repair kit 1
    £38.33 Excl. VAT £46.00 Incl. VAT

    Patch size=120 mm x 45 mm  Template Size=400 x 180 x 8 mm
  21. Trend TEMP/TRKX1/4 Template Timber Repair kit 2
    £38.33 Excl. VAT £46.00 Incl. VAT

    Patch size=120 mm x 45 mm  Template Size=400 x 180 x 8 mm
  22. Trend RTS/1000 Router T square 1000mm
    £51.26 Excl. VAT £61.51 Incl. VAT

    Out of stock

    Overall length=1060 mm  Blade size=1000m x 6 mm  Butt size= 300 mm x 16 mm  Square tolerance=0.5mm over 1m.
  23. Trend VJS/G/100 Varijig system straight guide 2.54 metre
    £51.76 Excl. VAT £62.11 Incl. VAT

  24. Trend VJS/G/35 Varijig system crosscut guide 900mm
    £46.44 Excl. VAT £55.73 Incl. VAT

  25. Trend Router table back fence
    £57.86 Excl. VAT £69.43 Incl. VAT

    Back fence height=68 mm  Back fence length=595 mm  Dust spout aperture=57 mm  Edge planing up to=1.4 & 2.4 mm  Requires  Table top slot width=8.5 mm  Table top slot length=100 mm  Table slot centres=408 mm

Back top top

1-25 of 50

Page:
  1. 1
  2. 2
Contact Us