JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 47

Page:
  1. 1
  2. 2
  1. Trend 6864 Collet for Makita 3620 8mm
    £5.14 Excl. VAT £6.17 Incl. VAT

    Out of stock

    d=8 mm  D=1/2 inch  Makita 3620 (M362)  
  2. Trend CLT/T3/6 Collet 6mm T3
    SKU: CLT/T3/6

    Trend CLT/T3/6 Collet 6mm T3

    T3 Collets

    £4.00 Excl. VAT £4.80 Incl. VAT

    Out of stock

    d=6 mm  Body length=20 mm  Body dia mouth.=12.2 mm  Body dia base.=10 mm
  3. Trend GB/COLL/25454 Guide bush collar 25.4mm to 53.9mm
    SKU: GB/COLL/25454

    Trend GB/COLL/25454 Guide bush collar 25.4mm to 53.9mm

    Aluminium guide bush collars

    £5.45 Excl. VAT £6.54 Incl. VAT

    ID=25.4 mm  OD=53.9 mm  Use with guide bush dia=25.4 mm  Use with cutter dia.=14.3 mm
  4. Trend GB/US/160 Guide bush USA 16mm hinge Jig
    SKU: GB/US/160

    Trend GB/US/160 Guide bush USA 16mm hinge Jig

    US style guide bushes

    £5.45 Excl. VAT £6.54 Incl. VAT

    Out of stock

    D=16 mm  D=5/8 inch  D2=14.5 mm  C=10 mm  To fit recess size=1-3/16 inch
  5. Trend CLT/T4/8 Collet 8mm T4
    SKU: CLT/T4/8

    Trend CLT/T4/8 Collet 8mm T4

    T4 Collets

    £4.12 Excl. VAT £4.94 Incl. VAT

    d=8 mm  Body length=20 mm  Body dia mouth.=12.2 mm  Body dia base.=10 mm
  6. Trend KB12/M/8 Lever M8 x 35 1 off
    £5.45 Excl. VAT £6.54 Incl. VAT

    Thread=M8  Thread Length=35 mm  H=36 mm  D=63 mm    Pack of 1
  7. Trend KB8/F/6 Lobe knob M6 Female 2 off
    £4.31 Excl. VAT £5.17 Incl. VAT

    Thread=M6  D=32 mm  H=23 mm     Pack of 2
  8. Trend WP-RTI/02 Insert 68mm to 98mm RTI/Plate
    £4.62 Excl. VAT £5.54 Incl. VAT

  9. Trend KB11/M/6 Lever M6 x 30 1 off
    £4.93 Excl. VAT £5.92 Incl. VAT

    Thread=M6  Thread Length=30 mm  H=28 mm  D=42 mm    Pack of 1  
  10. Trend SPAN/19 Spanner 19mm A/F forged
    £4.93 Excl. VAT £5.92 Incl. VAT

    19 mm A/F
  11. Trend PDW502763MM Collet 1/4 Power Devil Pdw5027
    SKU: PDW502763MM

    Trend PDW502763MM Collet 1/4 Power Devil Pdw5027

    Power Devil PDW5026,5027

    £5.45 Excl. VAT £6.54 Incl. VAT

    d=1/4 inch    Power Devil PDW5026,5027
  12. Trend GB/COLL/3054 Guide bush collar 30mm to 53.9mm
    SKU: GB/COLL/3054

    Trend GB/COLL/3054 Guide bush collar 30mm to 53.9mm

    Aluminium guide bush collars

    £5.45 Excl. VAT £6.54 Incl. VAT

    ID=30 mm  OD=54 mm  Use with guide bush dia=30 mm  Use with cutter dia.=12 mm
  13. Trend CLT/T3/3 Collet 3mm T3
    SKU: CLT/T3/3

    Trend CLT/T3/3 Collet 3mm T3

    T3 Collets

    £4.12 Excl. VAT £4.94 Incl. VAT

    d=3 mm  Body length=20 mm  Body dia mouth.=12.2 mm  Body dia base.=10 mm
  14. Trend INS/W8/10 Insert for wood M8 10
    £5.45 Excl. VAT £6.54 Incl. VAT

    Thread=M8  Hole size=11 mm  
  15. Trend PTN/6/10 Tee nut M6 10 off
    SKU: PTN/6/10

    Trend PTN/6/10 Tee nut M6 10 off

    Pronged Teenuts

    £4.31 Excl. VAT £5.17 Incl. VAT

    Hole diameter=8 mm  Thread=M6  
  16. Trend 6053 Collet cone 1/4 Makita 3700 (06053)
    £5.65 Excl. VAT £6.78 Incl. VAT

    Out of stock

    D=10mm  d=1/4 inch
  17. Trend TEMP/SCM/PIN1 Template pin 1/4 inch self centering mortise
    £4.31 Excl. VAT £5.17 Incl. VAT

    Shank=1/4 inch
  18. Trend SPAN/13 Spanner 13mm A/F forged
    £4.62 Excl. VAT £5.54 Incl. VAT

    13 mm A/F
  19. Trend CTR/250/25 Cable tie releaseable 25
    £4.93 Excl. VAT £5.92 Incl. VAT

    Length=250 mm  Width=7.5 mm
  20. Trend SPAN/1013 Spanner 10mm /13mm A/F forged
    £5.14 Excl. VAT £6.17 Incl. VAT

    10 mm & 13 mm A/F
  21. Trend CLT/T3/635 Collet 6.35mm (1/4 Inch) T3
    £4.12 Excl. VAT £4.94 Incl. VAT

    d=1/4 inch  d=6.35 mm  Body length=20 mm  Body dia mouth.=12.2 mm  Body dia base.=10 mm  
  22. Trend GB/COLL/7914 Guide bush collar 7.9mm to 14.28mm
    SKU: GB/COLL/7914

    Trend GB/COLL/7914 Guide bush collar 7.9mm to 14.28mm

    Aluminium guide bush collars

    £5.45 Excl. VAT £6.54 Incl. VAT

    ID=7.9 mm  OD=14.3 mm  Use with guide bush dia=7.93 mm  Use with cutter dia.=3.2 mm
  23. Trend GB/US/30 Guide bush USA 30mm 1-3/16 inch
    SKU: GB/US/30

    Trend GB/US/30 Guide bush USA 30mm 1-3/16 inch

    US style guide bushes

    £5.45 Excl. VAT £6.54 Incl. VAT

    D=30 mm  D=1-3/16 inch  D2=27 mm  C=5 mm  To fit recess size=1-3/16 inch
  24. Trend CLT/T3/8 Collet 8mm T3
    SKU: CLT/T3/8

    Trend CLT/T3/8 Collet 8mm T3

    T3 Collets

    £4.12 Excl. VAT £4.94 Incl. VAT

    d=8 mm  Body length=20 mm  Body dia mouth.=12.2 mm  Body dia base.=10 mm
  25. Trend KB15/F/8 Lever M8 female 1 off
    £5.45 Excl. VAT £6.54 Incl. VAT

    Thread=M8  H=36 mm  D=63 mm       Pack of 1

Back top top

1-25 of 47

Page:
  1. 1
  2. 2
Contact Us