WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 46

Page:
  1. 1
  2. 2
  1. Trend PJ/CL/L Clamp for Site/COMBI long and bolt
    £41.67 Excl. VAT £50.00 Incl. VAT

  2. Trend HR/JIG Hot Rod JIg
    £54.18 Excl. VAT £65.02 Incl. VAT

    Groove pitch=50.0 mm  Groove length=100, 200, 300 and 400 mm  Length=700 mm  Width=390 mm  Thickness=12 mm  Weight=3.5 kg
  3. Trend TEMP/LR/A Template lock recess
    £50.99 Excl. VAT £61.19 Incl. VAT

  4. Trend RBT/CUT/4 Routabout Cutter 22mm Floor 1/2" Shank
    £40.67 Excl. VAT £48.80 Incl. VAT

    Shank Diameter=1/2 inch  For use on 22 mm floor thickness
  5. Trend RBTRNG22/10 Routabout Ring Set 22mm 10 Off
    £45.44 Excl. VAT £54.53 Incl. VAT

    Max. load capacity=200 kg
  6. Trend RBT/CUT/3 Routabout Cutter 22mm Floor 1/4" Shank
    £40.67 Excl. VAT £48.80 Incl. VAT

    Shank Diameter=1/4 inch  For use on 22 mm floor thickness
  7. Trend RBT/3 Routabout Jig 22mm x 1/4" Shank
    £53.29 Excl. VAT £63.95 Incl. VAT

    Out of stock

  8. Trend RBT/2 Routabout Jig 18mm x 1/2" Shank
    £49.80 Excl. VAT £59.76 Incl. VAT

    Out of stock

  9. Trend RBT/4 Routabout Jig 22mm x 1/2" Shank
    £53.29 Excl. VAT £63.95 Incl. VAT

  10. Trend RBT/1 Routabout Jig 18mm x 1/4" Shank
    £49.80 Excl. VAT £59.76 Incl. VAT

  11. Trend R/COMPASS/A Router Compass 610mm
    £40.67 Excl. VAT £48.80 Incl. VAT

    Radius min.=100 mm  Radius max.=610 mm  Guide bush hole=30.1 mm
  12. Trend ZIP/170/25 Zipbolt 170mm pack of 25
    SKU: ZIP/170/25

    Trend ZIP/170/25 Zipbolt 170mm pack of 25

    Zipbolt Worktop Connectors

    £53.80 Excl. VAT £64.56 Incl. VAT

    Total length=170 mm  
  13. Trend CDJ300/03 Craft dovetail 300mm 8mm comb box
    £48.06 Excl. VAT £57.67 Incl. VAT

    Material thickness.=8 mm - 15 mm  Material width up to=300 mm  
  14. Trend CDJ300/02 Craft dovetail 300mm 1/2 comb box
    £48.06 Excl. VAT £57.67 Incl. VAT

    Material thickness.=8 mm - 20 mm  Material width up to=300 mm  
  15. Trend CDJ300/01 Craft dovetail 300mm 1/4 half blind
    £45.22 Excl. VAT £54.26 Incl. VAT

    Material thickness.=8 mm - 12 mm  Material width up to=300 mm  
  16. Trend CDJ600/02 Craft dovetail 600mm 1/2 comb box
    £53.41 Excl. VAT £64.09 Incl. VAT

    Material thickness.=8 mm - 20 mm  Material width up to=600 mm  
  17. Trend CDJ600/01 Craft dovetail 600mm 1/4 half blind
    £52.08 Excl. VAT £62.50 Incl. VAT

    Material thickness.=8 mm - 12 mm  Material width up to=600 mm  
  18. Trend D/STAND/A Door holder stand
    £41.32 Excl. VAT £49.58 Incl. VAT

    Maximum door thickness=55 mm  Minimum door thickness=32 mm  Maximum door weight=50 kg  Weight=2.2 kg
  19. TREND DGP/IP/CF DG/PRO INNER PLATE CURVED FAN
    £57.68 Excl. VAT £69.22 Incl. VAT

  20. TREND DGP/IP/HR DG/PRO INNER PLATE HOT ROD
    £57.68 Excl. VAT £69.22 Incl. VAT

  21. TREND DGP/IP/LF DG/PRO INNER PLATE LIGHTNING FAN
    £57.68 Excl. VAT £69.22 Incl. VAT

  22. TREND DGP/IP/SF DG/PRO INNER PLATE STRAIGHT FAN
    £57.68 Excl. VAT £69.22 Incl. VAT

  23. TREND DGP/IP/SS DG/PRO INNER PLATE STRAIGHT SLOT
    £57.68 Excl. VAT £69.22 Incl. VAT

    Out of stock

  24. TREND CURV/8X1000 MINI FLEXIBLE CURVE GUIDE 8MM X 1000MM
    £44.20 Excl. VAT £53.04 Incl. VAT

  25. Trend Template cabinet door hinge 35 & 26mm
    £47.18 Excl. VAT £56.62 Incl. VAT

    Size=355 mm x 320 mm x 12 mm  Hinge dia.=26 mm and 35 mm  Hole position range from top/bottom of door to centre of hinge  26 mm dia.=50 to 105mm*  35 mm dia.=50 to 190 mm*  * Hinge centre normally positioned 100 mm from top/bottom of door.  

Back top top

1-25 of 46

Page:
  1. 1
  2. 2
Contact Us