Our other sites:


Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.


240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

12 Item(s)

  1. Trend CDJ300/01 Craft dovetail 300mm 1/4 half blind
    £45.22 Excl. VAT £54.26 Incl. VAT

    Material thickness.=8 mm - 12 mm  Material width up to=300 mm  
  2. Trend GB/D Guide bush set 8 off imperial
    £48.06 Excl. VAT £57.67 Incl. VAT

    Set of eight imperial size guide bushes.  Guide bush size 7/8 inch to 1-5/16 inch in 1/16 of a inch increments
  3. Trend RBT/2 Routabout Jig 18mm x 1/2" Shank
    £49.80 Excl. VAT £59.76 Incl. VAT

    Out of stock

  4. Trend NVRS/2/230V/E No volt release switch 230V Euro
    £46.69 Excl. VAT £56.03 Incl. VAT

    Voltage=230v  Plug=13amp   Max. load=12amp
  5. Trend NVRS/2/240V No volt release switch 240V
    £49.05 Excl. VAT £58.86 Incl. VAT

    Voltage=240v  Plug=13amp   Max. load=12amp
    £45.34 Excl. VAT £54.41 Incl. VAT

  7. Trend CDJ300/03 Craft dovetail 300mm 8mm comb box
    £48.06 Excl. VAT £57.67 Incl. VAT

    Material thickness.=8 mm - 15 mm  Material width up to=300 mm  
  8. Trend RBT/1 Routabout Jig 18mm x 1/4" Shank
    £49.80 Excl. VAT £59.76 Incl. VAT

  9. Trend Template cabinet door hinge 35 & 26mm
    £47.18 Excl. VAT £56.62 Incl. VAT

    Size=355 mm x 320 mm x 12 mm  Hinge dia.=26 mm and 35 mm  Hole position range from top/bottom of door to centre of hinge  26 mm dia.=50 to 105mm*  35 mm dia.=50 to 190 mm*  * Hinge centre normally positioned 100 mm from top/bottom of door.  
  10. Trend VJS/G/35 Varijig system crosscut guide 900mm
    £49.26 Excl. VAT £59.11 Incl. VAT

    Out of stock

  11. Trend RBTRNG22/10 Routabout Ring Set 22mm 10 Off
    £45.44 Excl. VAT £54.53 Incl. VAT

    Max. load capacity=200 kg
  12. Trend CDJ300/02 Craft dovetail 300mm 1/2 comb box
    £48.06 Excl. VAT £57.67 Incl. VAT

    Material thickness.=8 mm - 20 mm  Material width up to=300 mm  

Back top top

12 Item(s)

Contact Us