JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 41

Page:
  1. 1
  2. 2
  1. Trend BSC/MIX/100 Biscuit mixed 0 10 20 100 off
    SKU: BSC/MIX/100

    Trend BSC/MIX/100 Biscuit mixed 0 10 20 100 off

    Biscuits packs mixed sizes

    £6.25 Excl. VAT £7.50 Incl. VAT

    Size 0=47.5 mm x 15.5 mm x 4 mm  For board thickness=8 mm - 12 mm    Size 10=53 mm x 19 mm x 4 mm  For board thickness=13 mm - 18 mm    Size 20=60 mm x 23 mm x 4 mm  For board thickness=19 mm+
  2. Trend PTN/8/10 Tee nut M8 10 off
    SKU: PTN/8/10

    Trend PTN/8/10 Tee nut M8 10 off

    Pronged Teenuts

    £5.08 Excl. VAT £6.10 Incl. VAT

    Hole diameter=10 mm  Thread=M8  
  3. Trend BEAM/005 Beam trammel 005
    £6.68 Excl. VAT £8.02 Incl. VAT

    To suit rod diameter=8 mm    Suitable for routers with 8mm dia. side fence rods eg  Trend T5  Dewalt DW613, DW615  Elu MOF96
  4. Trend SPAN/19 Spanner 19mm A/F forged
    £5.08 Excl. VAT £6.10 Incl. VAT

    19 mm A/F
  5. Trend INS/P8/10 Insert plastics M8 (10)
    £6.68 Excl. VAT £8.02 Incl. VAT

    Thread=M8  Hole size=9.5 mm  
  6. Trend PDW502763MM Collet 1/4 Power Devil Pdw5027
    SKU: PDW502763MM

    Trend PDW502763MM Collet 1/4 Power Devil Pdw5027

    Power Devil PDW5026,5027

    £5.45 Excl. VAT £6.54 Incl. VAT

    Out of stock

    d=1/4 inch    Power Devil PDW5026,5027
  7. Trend GB/COLL/3054 Guide bush collar 30mm to 53.9mm
    SKU: GB/COLL/3054

    Trend GB/COLL/3054 Guide bush collar 30mm to 53.9mm

    Aluminium guide bush collars

    £5.61 Excl. VAT £6.73 Incl. VAT

    ID=30 mm  OD=54 mm  Use with guide bush dia=30 mm  Use with cutter dia.=12 mm
  8. Trend INS/W8/10 Insert for wood M8 10
    £5.61 Excl. VAT £6.73 Incl. VAT

    Thread=M8  Hole size=11 mm  
  9. Trend 6053 Collet cone 1/4 Makita 3700 (06053)
    £5.82 Excl. VAT £6.98 Incl. VAT

    Out of stock

    D=10mm  d=1/4 inch
  10. Trend BSC/20/100 Biscuit No 20 100 off
    £6.25 Excl. VAT £7.50 Incl. VAT

    Size=60 mm x 23 mm x 4 mm  For board thickness=19 mm+  
  11. Trend CTR/250/25 Cable tie releaseable 25
    £5.08 Excl. VAT £6.10 Incl. VAT

    Length=250 mm  Width=7.5 mm
  12. Trend CLT/SLV/638 Collet sleeve 6.35mm to 8mm
    £6.68 Excl. VAT £8.02 Incl. VAT

    D=8 mm  OL=25 mm  Bore=1/4 inch  Bore=6.35 mm  
  13. Trend 6864 Collet for Makita 3620 8mm
    £5.29 Excl. VAT £6.35 Incl. VAT

    Out of stock

    d=8 mm  D=1/2 inch  Makita 3620 (M362)  
  14. Trend TEMP/OTB/PIN1 Template pin 1/4 and 8mm trenching base
    £6.88 Excl. VAT £8.26 Incl. VAT

    Cone dia.=32 mm  Length=70 mm  Shank=1/4 inch and 8 mm
  15. Trend GB/COLL/7914 Guide bush collar 7.9mm to 14.28mm
    SKU: GB/COLL/7914

    Trend GB/COLL/7914 Guide bush collar 7.9mm to 14.28mm

    Aluminium guide bush collars

    £5.61 Excl. VAT £6.73 Incl. VAT

    ID=7.9 mm  OD=14.3 mm  Use with guide bush dia=7.93 mm  Use with cutter dia.=3.2 mm
  16. Trend GB/US/30 Guide bush USA 30mm 1-3/16 inch
    SKU: GB/US/30

    Trend GB/US/30 Guide bush USA 30mm 1-3/16 inch

    US style guide bushes

    £5.61 Excl. VAT £6.73 Incl. VAT

    D=30 mm  D=1-3/16 inch  D2=27 mm  C=5 mm  To fit recess size=1-3/16 inch
  17. Trend KB15/F/8 Lever M8 female 1 off
    £5.61 Excl. VAT £6.73 Incl. VAT

    Thread=M8  H=36 mm  D=63 mm       Pack of 1
  18. Trend BSC/0/100 Biscuit No 0 100 off
    £6.25 Excl. VAT £7.50 Incl. VAT

    Size=47.5 mm x 15.5 mm x 4 mm  For board thickness=8 mm - 12 mm  
  19. Trend KB11/M/6 Lever M6 x 30 1 off
    £5.08 Excl. VAT £6.10 Incl. VAT

    Thread=M6  Thread Length=30 mm  H=28 mm  D=42 mm    Pack of 1  
  20. Trend CE/NUT/8 Collet extension 8mm collet nut
    £6.68 Excl. VAT £8.02 Incl. VAT

    D=17 (A/F) mm  Thread=M17x0.75mm
  21. Trend CJ/640H/FPK COMBI640H fixing pack kit
    £5.08 Excl. VAT £6.10 Incl. VAT

  22. Trend KB1/M/6 Locking key M6 x 20 4 off
    £6.68 Excl. VAT £8.02 Incl. VAT

    Out of stock

    Thread=M6  Thread length=20 mm  H=15 mm  D=32 mm     Pack of 4
  23. Trend PDW502708MM Collet 8mm Power Devil Pdw5027
    SKU: PDW502708MM

    Trend PDW502708MM Collet 8mm Power Devil Pdw5027

    Power Devil PDW5026, 5027

    £5.61 Excl. VAT £6.73 Incl. VAT

    d=8 mm    Power Devil PDW5026, 5027  
  24. Trend GB/COLL/1630 Guide Bush Collar 16mm to 30mm
    SKU: GB/COLL/1630

    Trend GB/COLL/1630 Guide Bush Collar 16mm to 30mm

    Aluminium guide bush collars

    £5.61 Excl. VAT £6.73 Incl. VAT

    ID=16 mm  OD=30 mm  Use with guide bush dia=16 mm  Use with cutter dia.=7 mm
  25. Trend CR/KB/PK1 Craft locking key M6 x 20 10 pack
    SKU: CR/KB/PK1

    Trend CR/KB/PK1 Craft locking key M6 x 20 10 pack

    Locking Keys-Male

    £5.61 Excl. VAT £6.73 Incl. VAT

    Thread=M6  Thread length=20 mm  H=14 mm  D=31 mm  Pack of 10

Back top top

1-25 of 41

Page:
  1. 1
  2. 2
Contact Us