WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 34

Page:
  1. 1
  2. 2
  1. Trend GB/COLL/2040 Guide bush collar 20mm to 40mm
    SKU: GB/COLL/2040

    Trend GB/COLL/2040 Guide bush collar 20mm to 40mm

    Aluminium guide bush collars

    £7.80 Excl. VAT £9.36 Incl. VAT

    ID=20 mm  OD=40 mm  Use with guide bush dia=20 mm  Use with cutter dia.=10 mm
  2. Trend INS/W8/10 Insert for wood M8 10
    £7.80 Excl. VAT £9.36 Incl. VAT

    Thread=M8  Hole size=11 mm  
  3. Trend CLT/NUT/T4 Collet nut for T4
    £5.15 Excl. VAT £6.18 Incl. VAT

    D=17 (A/F) mm  Thread=M15x1.0mm  
  4. Trend CLT/T4/6 Collet 6mm T4
    SKU: CLT/T4/6

    Trend CLT/T4/6 Collet 6mm T4

    T4 Collets

    £5.73 Excl. VAT £6.88 Incl. VAT

    d=6 mm  Body length=20 mm  Body dia mouth.=12.2 mm  Body dia base.=10 mm
  5. Trend 6053 Collet cone 1/4 Makita 3700 (06053)
    £6.00 Excl. VAT £7.20 Incl. VAT

    Out of stock

    D=10mm  d=1/4 inch
  6. Trend BUSH/600 Bush for COMBI600 alloy 20mm 1 off
    £6.79 Excl. VAT £8.15 Incl. VAT

    Diameter= 20 mm  Overall length=37 mm  Pin length=9 mm  Pin diameter=10 mm  Min. jig thickness=10 mm  Suits jig=COMBI600, TT/KWJ600
  7. Trend KB6/M/8 Lobe knob M8 x 35 2 off
    £7.08 Excl. VAT £8.50 Incl. VAT

    Thread=M8  Thread length=35 mm  H=27 mm  D=40 mm    Pack of 2
  8. Trend GB/COLL/25454 Guide bush collar 25.4mm to 53.9mm
    SKU: GB/COLL/25454

    Trend GB/COLL/25454 Guide bush collar 25.4mm to 53.9mm

    Aluminium guide bush collars

    £7.80 Excl. VAT £9.36 Incl. VAT

    ID=25.4 mm  OD=53.9 mm  Use with guide bush dia=25.4 mm  Use with cutter dia.=14.3 mm
  9. Trend GB/US/160 Guide bush USA 16mm hinge Jig
    SKU: GB/US/160

    Trend GB/US/160 Guide bush USA 16mm hinge Jig

    US style guide bushes

    £7.80 Excl. VAT £9.36 Incl. VAT

    D=16 mm  D=5/8 inch  D2=14.5 mm  C=10 mm  To fit recess size=1-3/16 inch
  10. Trend 6864 Collet for Makita 3620 8mm
    £5.45 Excl. VAT £6.54 Incl. VAT

    Out of stock

    d=8 mm  D=1/2 inch  Makita 3620 (M362)  
  11. Trend CLT/T4/635 Collet 6.35mm (1/4") T4
    SKU: CLT/T4/635

    Trend CLT/T4/635 Collet 6.35mm (1/4") T4

    T4 Collets

    £5.90 Excl. VAT £7.08 Incl. VAT

    d=1/4 inch  d=6.35 mm  Body length=20 mm  Body dia mouth.=12.2 mm  Body dia base.=10 mm
  12. Trend SPAN/15 Spanner 15mm A/F forged
    £6.39 Excl. VAT £7.67 Incl. VAT

    Out of stock

    15 mm A/F
  13. Trend WP-RTI/04 Corner fixing kit RTI/Plate
    £7.00 Excl. VAT £8.40 Incl. VAT

  14. TREND WP-T/SS/01 STEPPED PIN FOR TEMP/SS/A
    £7.49 Excl. VAT £8.99 Incl. VAT

  15. Trend GB/COLL/3054 Guide bush collar 30mm to 53.9mm
    SKU: GB/COLL/3054

    Trend GB/COLL/3054 Guide bush collar 30mm to 53.9mm

    Aluminium guide bush collars

    £7.80 Excl. VAT £9.36 Incl. VAT

    ID=30 mm  OD=54 mm  Use with guide bush dia=30 mm  Use with cutter dia.=12 mm
  16. Trend KB12/M/8 Lever M8 x 35 1 off
    £7.80 Excl. VAT £9.36 Incl. VAT

    Thread=M8  Thread Length=35 mm  H=36 mm  D=63 mm    Pack of 1
  17. Trend GB13/P/A Guide bush plastic 13mm x 5mm spigot
    SKU: GB13/P/A

    Trend GB13/P/A Guide bush plastic 13mm x 5mm spigot

    Plastic guide bush

    £5.44 Excl. VAT £6.53 Incl. VAT

    Outside diameter=13 mm  Inner diameter=10 mm  Projects from plate=5 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm  
  18. TREND WP-WRT/04 FENCE CHEEK WRT
    £5.79 Excl. VAT £6.95 Incl. VAT

  19. Trend INS/P6/10 Insert plastics M6 (10)
    £6.18 Excl. VAT £7.42 Incl. VAT

    Thread=M6  Hole size=8 mm  Length=12.6 mm  Lip dia=9.5 mm  Body di=8.2 mm
  20. Trend WP-RTI/02 Insert 68mm to 98mm RTI/Plate
    £7.00 Excl. VAT £8.40 Incl. VAT

  21. Trend 94326901 Collet Elu MKF167-267 1/4 Inch
    SKU: 94326901.00

    Trend 94326901 Collet Elu MKF167-267 1/4 Inch

    Replacement Collet

    £7.31 Excl. VAT £8.77 Incl. VAT

    Out of stock

    D=1/4"    Elu MKF167,267    Black & Decker KW780?, 779?, KW800?, KW900?, Dewalt DW670
  22. Trend GB/COLL/7914 Guide bush collar 7.9mm to 14.28mm
    SKU: GB/COLL/7914

    Trend GB/COLL/7914 Guide bush collar 7.9mm to 14.28mm

    Aluminium guide bush collars

    £7.80 Excl. VAT £9.36 Incl. VAT

    ID=7.9 mm  OD=14.3 mm  Use with guide bush dia=7.93 mm  Use with cutter dia.=3.2 mm
  23. Trend GB/US/30 Guide bush USA 30mm 1-3/16 inch
    SKU: GB/US/30

    Trend GB/US/30 Guide bush USA 30mm 1-3/16 inch

    US style guide bushes

    £7.80 Excl. VAT £9.36 Incl. VAT

    D=30 mm  D=1-3/16 inch  D2=27 mm  C=5 mm  To fit recess size=1-3/16 inch
  24. Trend CLT/T3/3 Collet 3mm T3
    SKU: CLT/T3/3

    Trend CLT/T3/3 Collet 3mm T3

    T3 Collets

    £5.73 Excl. VAT £6.88 Incl. VAT

    d=3 mm  Body length=20 mm  Body dia mouth.=12.2 mm  Body dia base.=10 mm
  25. Trend CLT/T4/8 Collet 8mm T4
    SKU: CLT/T4/8

    Trend CLT/T4/8 Collet 8mm T4

    T4 Collets

    £5.90 Excl. VAT £7.08 Incl. VAT

    d=8 mm  Body length=20 mm  Body dia mouth.=12.2 mm  Body dia base.=10 mm

Back top top

1-25 of 34

Page:
  1. 1
  2. 2
Contact Us