WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

12 Item(s)

  1. Trend TEMP/LR/A Template lock recess
    £50.99 Excl. VAT £61.19 Incl. VAT

  2. Trend ZIP/170/25 Zipbolt 170mm pack of 25
    SKU: ZIP/170/25

    Trend ZIP/170/25 Zipbolt 170mm pack of 25

    Zipbolt Worktop Connectors

    £53.80 Excl. VAT £64.56 Incl. VAT

    Total length=170 mm  
  3. Trend CE/1212 Collet extension 12mm shank 12mm collet
    £54.38 Excl. VAT £65.26 Incl. VAT

    Shank size=12 mm  Collet bore=12 mm  Overall length=85 mm  Maximum speed=18000 rpm  Maximum tool dia=50 mm  Maximum tool cut=30 mm
  4. Trend RBT/3 Routabout Jig 22mm x 1/4" Shank
    £53.29 Excl. VAT £63.95 Incl. VAT

    Out of stock

  5. Trend CE/127635 Collet extension 1/2" shank 1/4" collet
    £54.38 Excl. VAT £65.26 Incl. VAT

    Shank size=1/2 inch (12.7 mm)  Collet bore=1/4 inch (6.35 mm)  Overall length=85 mm  Nut dia. max.=25 mm  Maximum speed=18000 rpm  Maximum tool dia=50 mm  Requires spanners=19 mm & 22 mm A/F
  6. Trend CDJ600/01 Craft dovetail 600mm 1/4 half blind
    £52.08 Excl. VAT £62.50 Incl. VAT

    Material thickness.=8 mm - 12 mm  Material width up to=600 mm  
  7. Trend HR/JIG Hot Rod JIg
    £54.18 Excl. VAT £65.02 Incl. VAT

    Groove pitch=50.0 mm  Groove length=100, 200, 300 and 400 mm  Length=700 mm  Width=390 mm  Thickness=12 mm  Weight=3.5 kg
  8. Trend RTS/1000 Router T square 1000mm
    £54.38 Excl. VAT £65.26 Incl. VAT

    Overall length=1060 mm  Blade size=1000m x 6 mm  Butt size= 300 mm x 16 mm  Square tolerance=0.5mm over 1m.
  9. Trend CDJ600/02 Craft dovetail 600mm 1/2 comb box
    £53.41 Excl. VAT £64.09 Incl. VAT

    Material thickness.=8 mm - 20 mm  Material width up to=600 mm  
  10. Trend CE/128 Collet extension 12mm shank 8mm collet
    £54.38 Excl. VAT £65.26 Incl. VAT

    Shank size=12 mm  Collet size d=8 mm  Overall length=72 mm  Maximum speed=18000 rpm  Maximum tool dia=50 mm  Maximum tool cut=30 mm  
  11. Trend RBT/4 Routabout Jig 22mm x 1/2" Shank
    £53.29 Excl. VAT £63.95 Incl. VAT

  12. Trend CE/127127 Collet extension 1/2" shank 1/2" collet
    £54.38 Excl. VAT £65.26 Incl. VAT

Back top top

12 Item(s)

Contact Us