JIGS, TABLES & ACCESSORIES
Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.
IMPORTANT SAFETY NOTICE for 2018
240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK
Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911 www.trend-uk.com
-
-
SKU: SM/TSP
Trend SM/TSP Scribe-Master Tenon Slide Plate
£54.70 Excl. VAT £65.64 Incl. VATMax. working length=190 mm Max. tenon length adj.=50 mm Max. cutter dia.=22 mm -
SKU: D/STAND/A
Trend D/STAND/A Door holder stand
£55.75 Excl. VAT £66.90 Incl. VATMaximum door thickness=55 mm Minimum door thickness=32 mm Maximum door weight=50 kg Weight=2.2 kg -
SKU: TEMP/COR/A
Trend TEMP/COR/A Template corner hole
£58.05 Excl. VAT £69.66 Incl. VATSize=290 x 290 x 8 mm -
SKU: RBT/CUT/1
Trend RBT/CUT/1 Routabout Cutter 18mm Floor 1/4" Shank
£53.99 Excl. VAT £64.79 Incl. VATShank Diameter=1/4 inch For use on 18 mm floor thickness -
SKU: RBTRNG18/10
Trend RBTRNG18/10 Routabout Ring Set 18mm 10 Off
£54.88 Excl. VAT £65.86 Incl. VATMax. load capacity=200 kg -
SKU: RBT/CUT/3
Trend RBT/CUT/3 Routabout Cutter 22mm Floor 1/4" Shank
£58.05 Excl. VAT £69.66 Incl. VATShank Diameter=1/4 inch For use on 22 mm floor thickness -
-
£52.76 Excl. VAT £63.31 Incl. VAT
-
SKU: TEMP/BH/A
Trend TEMP/BH/A Template butt hinge
£54.76 Excl. VAT £65.71 Incl. VATSize= 214 mm x 135 mm x 8 mm Door thickness min.=34 mm Door thickness max.=44 mm Hinge recess length=75 mm Hinge recess length=100 mm -
SKU: TEMP/LUC/57
Trend TEMP/LUC/57 Template set letters 57mm uppercase
£55.83 Excl. VAT £67.00 Incl. VATSize=396 x 110 x 5 mm -
SKU: TEMP/TRKX1/4
Trend TEMP/TRKX1/4 Template Timber Repair kit 2
£58.05 Excl. VAT £69.66 Incl. VATPatch size=120 mm x 45 mm Template Size=400 x 180 x 8 mm -
SKU: RBT/CUT/2
Trend RBT/CUT/2 Routabout Cutter 18mm Floor 1/2" Shank
£53.99 Excl. VAT £64.79 Incl. VATShank Diameter=1/2 inch For use on 18 mm floor thickness -
SKU: R/COMPASS/A
Trend R/COMPASS/A Router Compass 610mm
£54.88 Excl. VAT £65.86 Incl. VATRadius min.=100 mm Radius max.=610 mm Guide bush hole=30.1 mm -
SKU: RBT/CUT/4
Trend RBT/CUT/4 Routabout Cutter 22mm Floor 1/2" Shank
£58.05 Excl. VAT £69.66 Incl. VATShank Diameter=1/2 inch For use on 22 mm floor thickness -
SKU: CASE/T10
Trend CASE/T10 Carry case T10 router
£53.74 Excl. VAT £64.49 Incl. VATSize=390 mm x 295 mm x 240 mm -
SKU: TEMP/LB/A
Trend TEMP/LB/A Template letterbox
£54.76 Excl. VAT £65.71 Incl. VATTemplate size=326 mm x 290 mm x 8 mm Letterbox plate sizes 220 mm x 50 mm 210 mm x 60 mm 200 mm x 60 mm -
SKU: RTI/PLATE
Trend RTI/PLATE Router table insert plate
£58.05 Excl. VAT £69.66 Incl. VATPlate size=306 mm x 229 mm x 9.5 mm. Max router weight=8 kg Max router base dia=200 mm -
SKU: TEMP/SS/A
Trend TEMP/SS/A Template shelf support 32mm Centre
£58.05 Excl. VAT £69.66 Incl. VATSize 500 mm x 130 mm x 8 mm