JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 62

Page:
  1. 1
  2. 2
  3. 3
  1. Trend GB157 Guide bush 15.68mm x 6mm DJ300
    SKU: GB157

    Trend GB157 Guide bush 15.68mm x 6mm DJ300

    Guide Bush Metal

    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=15.68 mm  Inner diameter=14.1 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  2. Trend BSJ/PIN/4 BS/JIG 10mm pin pack of 4
    £7.18 Excl. VAT £8.62 Incl. VAT

    D=10 mm
  3. Trend BSC/MIX/100 Biscuit mixed 0 10 20 100 off
    SKU: BSC/MIX/100

    Trend BSC/MIX/100 Biscuit mixed 0 10 20 100 off

    Biscuits packs mixed sizes

    £6.06 Excl. VAT £7.27 Incl. VAT

    Size 0=47.5 mm x 15.5 mm x 4 mm  For board thickness=8 mm - 12 mm    Size 10=53 mm x 19 mm x 4 mm  For board thickness=13 mm - 18 mm    Size 20=60 mm x 23 mm x 4 mm  For board thickness=19 mm+
  4. Trend GB16 Guide bush 16mm diameter
    SKU: GB16

    Trend GB16 Guide bush 16mm diameter

    Guide Bush Metal

    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=16 mm  Inner diameter=13 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  5. Trend BEAM/005 Beam trammel 005
    £6.48 Excl. VAT £7.78 Incl. VAT

    To suit rod diameter=8 mm    Suitable for routers with 8mm dia. side fence rods eg  Trend T5  Dewalt DW613, DW615  Elu MOF96
  6. Trend GB24 Guide bush 24mm diameter
    SKU: GB24

    Trend GB24 Guide bush 24mm diameter

    Guide Bush Metal

    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=24 mm  Inner diameter=21 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  7. Trend INS/P8/10 Insert plastics M8 (10)
    £6.48 Excl. VAT £7.78 Incl. VAT

    Thread=M8  Hole size=9.5 mm  
  8. Trend GB32 Guide bush 32mm diameter
    SKU: GB32

    Trend GB32 Guide bush 32mm diameter

    Guide Bush Metal

    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=32 mm  Inner diameter=29 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  9. Trend GB302 Guide bush 30.2mm (1-3/16) diameter
    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=30.2 mm  Outside diameter=1 3/16"  Inner diameter=27.2 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  10. Trend GB22/A Guide bush 22mm diameter x 4mm spigot
    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=22 mm  Projects from plate=4 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  11. Trend GB222 Guide bush 22.2mm (7/8) diameter
    SKU: GB222

    Trend GB222 Guide bush 22.2mm (7/8) diameter

    Guide Bush Metal

    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=22.2 mm  Outside diameter=7/8"  Inner diameter=19.2 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  12. Trend KB16/F/10 Lever M10 female 1 off
    £7.09 Excl. VAT £8.51 Incl. VAT

    Thread=M10  H=45 mm  D=80 mm    Pack of 1
  13. Trend GB95 Guide bush 9.5mm diameter
    SKU: GB95

    Trend GB95 Guide bush 9.5mm diameter

    Guide Bush Metal

    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=9.5 mm  Outside diameter=3/8"  Inner diameter=7.9 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  14. Trend CTI/60/PK2 Cable tidy insert brown 60mm
    SKU: CTI/60/PK2

    Trend CTI/60/PK2 Cable tidy insert brown 60mm

    Plastic cable tidy inserts

    £7.09 Excl. VAT £8.51 Incl. VAT

    Size=60 mm  Colour=Brown
  15. Trend GB12 Guide bush 12mm diameter
    SKU: GB12

    Trend GB12 Guide bush 12mm diameter

    Guide Bush Metal

    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=12 mm  Inner diameter=9 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm  
  16. Trend BSC/20/100 Biscuit No 20 100 off
    £6.06 Excl. VAT £7.27 Incl. VAT

    Size=60 mm x 23 mm x 4 mm  For board thickness=19 mm+  
  17. Trend GB20 Guide bush 20mm diameter
    SKU: GB20

    Trend GB20 Guide bush 20mm diameter

    Guide Bush Metal

    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=20 mm  Inner diameter=17 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  18. Trend CLT/SLV/638 Collet sleeve 6.35mm to 8mm
    £6.48 Excl. VAT £7.78 Incl. VAT

    D=8 mm  OL=25 mm  Bore=1/4 inch  Bore=6.35 mm  
  19. Trend GB30/B Guide bush 30mm diameter (from plate 5mm)
    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=30 mm  Inner diameter=27 mm  Projects from plate=5 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  20. Trend TEMP/OTB/PIN1 Template pin 1/4 and 8mm trenching base
    £6.68 Excl. VAT £8.02 Incl. VAT

    Out of stock

    Cone dia.=32 mm  Length=70 mm  Shank=1/4 inch and 8 mm
  21. Trend GB11 Guide bush 11mm diameter
    SKU: GB11

    Trend GB11 Guide bush 11mm diameter

    Guide Bush Metal

    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=11 mm  Inner diameter=8 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  22. Trend GB286 Guide bush 28.6mm (1-1/8) diameter
    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=28.6 mm  Outside diameter=1 1/8"  Inner diameter=25.6 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  23. Trend CR/KB/PK8 Craft adjustable lever male M6 x 15 4 Pack
    SKU: CR/KB/PK8

    Trend CR/KB/PK8 Craft adjustable lever male M6 x 15 4 Pack

    Adjustable Levers-Male

    £7.09 Excl. VAT £8.51 Incl. VAT

    Out of stock

    Thread=M6  Thread length=15 mm  H=31 mm  D=43 mm     Pack of 4
  24. Trend GB111 Guide bush 11.1mm (7/16) diameter
    SKU: GB111

    Trend GB111 Guide bush 11.1mm (7/16) diameter

    Guide Bush Metal

    £7.09 Excl. VAT £8.51 Incl. VAT

    Outside diameter=11.1 mm  Outside diameter=7/16"  Inner diameter=9 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  25. Trend CTI/60/PK1 Cable tidy insert light grey 60mm
    SKU: CTI/60/PK1

    Trend CTI/60/PK1 Cable tidy insert light grey 60mm

    Plastic cable tidy inserts

    £7.09 Excl. VAT £8.51 Incl. VAT

    Size=60 mm  Colour=Light grey

Back top top

1-25 of 62

Page:
  1. 1
  2. 2
  3. 3
Contact Us