WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 52

Page:
  1. 1
  2. 2
  3. 3
  1. Trend GB95 Guide bush 9.5mm diameter
    SKU: GB95

    Trend GB95 Guide bush 9.5mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=9.5 mm  Outside diameter=3/8"  Inner diameter=7.9 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  2. Trend GB12 Guide bush 12mm diameter
    SKU: GB12

    Trend GB12 Guide bush 12mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=12 mm  Inner diameter=9 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm  
  3. Trend 6053 Collet cone 1/4 Makita 3700 (06053)
    £6.00 Excl. VAT £7.20 Incl. VAT

    Out of stock

    D=10mm  d=1/4 inch
  4. Trend GB20 Guide bush 20mm diameter
    SKU: GB20

    Trend GB20 Guide bush 20mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=20 mm  Inner diameter=17 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  5. Trend BSC/20/100 Biscuit No 20 100 off
    £6.44 Excl. VAT £7.73 Incl. VAT

    Size=60 mm x 23 mm x 4 mm  For board thickness=19 mm+  
  6. Trend GB30/B Guide bush 30mm diameter (from plate 5mm)
    £7.53 Excl. VAT £9.04 Incl. VAT

    Out of stock

    Outside diameter=30 mm  Inner diameter=27 mm  Projects from plate=5 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  7. Trend CLT/SLV/6395 Collet sleeve 6.35mm to 9.5mm
    £6.88 Excl. VAT £8.26 Incl. VAT

    D=3/8 inch  D=9.5 mm  OL=25 mm  Bore=1/4 inch  Bore=6.35 mm  
  8. Trend 94326901 Collet Elu MKF167-267 1/4 Inch
    SKU: 94326901.00

    Trend 94326901 Collet Elu MKF167-267 1/4 Inch

    Replacement Collet

    £7.31 Excl. VAT £8.77 Incl. VAT

    Out of stock

    D=1/4"    Elu MKF167,267    Black & Decker KW780?, 779?, KW800?, KW900?, Dewalt DW670
  9. Trend GB11 Guide bush 11mm diameter
    SKU: GB11

    Trend GB11 Guide bush 11mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=11 mm  Inner diameter=8 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  10. Trend GB286 Guide bush 28.6mm (1-1/8) diameter
    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=28.6 mm  Outside diameter=1 1/8"  Inner diameter=25.6 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  11. Trend GB111 Guide bush 11.1mm (7/16) diameter
    SKU: GB111

    Trend GB111 Guide bush 11.1mm (7/16) diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=11.1 mm  Outside diameter=7/16"  Inner diameter=9 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  12. Trend GB158/B Guide bush 15.8 x 4mm CDJ300
    SKU: GB158/B

    Trend GB158/B Guide bush 15.8 x 4mm CDJ300

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=15.8 mm  Outside diameter=5/8"  Projects from plate=4 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  13. Trend GB17 Guide bush 17mm diameter
    SKU: GB17

    Trend GB17 Guide bush 17mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=17 mm  Inner diameter=14 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  14. Trend BSC/0/100 Biscuit No 0 100 off
    £6.44 Excl. VAT £7.73 Incl. VAT

    Size=47.5 mm x 15.5 mm x 4 mm  For board thickness=8 mm - 12 mm  
  15. Trend GB26 Guide bush 26mm diameter
    SKU: GB26

    Trend GB26 Guide bush 26mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=26 mm  Inner diameter=23 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  16. Trend BEAM/005 Beam trammel 005
    £6.88 Excl. VAT £8.26 Incl. VAT

    To suit rod diameter=8 mm    Suitable for routers with 8mm dia. side fence rods eg  Trend T5  Dewalt DW613, DW615  Elu MOF96
  17. Trend INS/P8/10 Insert plastics M8 (10)
    £6.88 Excl. VAT £8.26 Incl. VAT

    Thread=M8  Hole size=9.5 mm  
  18. Trend GB40 Guide bush 40mm diameter
    SKU: GB40

    Trend GB40 Guide bush 40mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=40 mm  Inner diameter=37 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  19. Trend GB333 Guide bush 33.3mm (1-5/16) diameter
    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=33.3 mm  Outside diameter=1 5/16"  Inner diameter=30.3 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  20. Trend KB10/F/10 Lobe knob M10 Female 2 off
    £7.53 Excl. VAT £9.04 Incl. VAT

    Thread=M10  Thread Length=25 mm  H=32 mm  D=50 mm    Pack of 2
  21. Trend GB793 Guide bush 7.93mm diameter (5/16)
    SKU: GB793

    Trend GB793 Guide bush 7.93mm diameter (5/16)

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=7.93 mm  Outside diameter=5/16"  Inner diameter=4.8 mm  Projects from plate=5 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  22. Trend GB108 Guide bush 10.8mm diameter
    SKU: GB108

    Trend GB108 Guide bush 10.8mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=10.8 mm  Inner diameter=8.8 mm  Projects from plate=4.5 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  23. Trend GB14 Guide bush 14mm diameter
    SKU: GB14

    Trend GB14 Guide bush 14mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=14 mm  Inner diameter=11 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  24. Trend KWJ/PIN/4 KWJ900 10mm pin pack of 4
    £6.07 Excl. VAT £7.28 Incl. VAT

    D=10 mm
  25. Trend GB22 Guide bush 22mm diameter
    SKU: GB22

    Trend GB22 Guide bush 22mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=22 mm  Inner diameter=19 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm

Back top top

1-25 of 52

Page:
  1. 1
  2. 2
  3. 3
Contact Us