WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 40

Page:
  1. 1
  2. 2
  1. Trend GB30/B Guide bush 30mm diameter (from plate 5mm)
    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=30 mm  Inner diameter=27 mm  Projects from plate=5 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  2. Trend 94326901 Collet Elu MKF167-267 1/4 Inch
    SKU: 94326901.00

    Trend 94326901 Collet Elu MKF167-267 1/4 Inch

    Replacement Collet

    £7.31 Excl. VAT £8.77 Incl. VAT

    Out of stock

    D=1/4"    Elu MKF167,267    Black & Decker KW780?, 779?, KW800?, KW900?, Dewalt DW670
  3. Trend GB11 Guide bush 11mm diameter
    SKU: GB11

    Trend GB11 Guide bush 11mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=11 mm  Inner diameter=8 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  4. Trend GB286 Guide bush 28.6mm (1-1/8) diameter
    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=28.6 mm  Outside diameter=1 1/8"  Inner diameter=25.6 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  5. Trend BSJ/PIN/4 BS/JIG 10mm pin pack of 4
    £7.62 Excl. VAT £9.14 Incl. VAT

    D=10 mm
  6. Trend GB111 Guide bush 11.1mm (7/16) diameter
    SKU: GB111

    Trend GB111 Guide bush 11.1mm (7/16) diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=11.1 mm  Outside diameter=7/16"  Inner diameter=9 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  7. Trend GB158/B Guide bush 15.8 x 4mm CDJ300
    SKU: GB158/B

    Trend GB158/B Guide bush 15.8 x 4mm CDJ300

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=15.8 mm  Outside diameter=5/8"  Projects from plate=4 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  8. Trend GB17 Guide bush 17mm diameter
    SKU: GB17

    Trend GB17 Guide bush 17mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=17 mm  Inner diameter=14 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  9. Trend GB26 Guide bush 26mm diameter
    SKU: GB26

    Trend GB26 Guide bush 26mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=26 mm  Inner diameter=23 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  10. Trend GB40 Guide bush 40mm diameter
    SKU: GB40

    Trend GB40 Guide bush 40mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=40 mm  Inner diameter=37 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  11. Trend GB333 Guide bush 33.3mm (1-5/16) diameter
    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=33.3 mm  Outside diameter=1 5/16"  Inner diameter=30.3 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  12. Trend KB10/F/10 Lobe knob M10 Female 2 off
    £7.53 Excl. VAT £9.04 Incl. VAT

    Thread=M10  Thread Length=25 mm  H=32 mm  D=50 mm    Pack of 2
  13. Trend GB793 Guide bush 7.93mm diameter (5/16)
    SKU: GB793

    Trend GB793 Guide bush 7.93mm diameter (5/16)

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=7.93 mm  Outside diameter=5/16"  Inner diameter=4.8 mm  Projects from plate=5 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  14. Trend GB108 Guide bush 10.8mm diameter
    SKU: GB108

    Trend GB108 Guide bush 10.8mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=10.8 mm  Inner diameter=8.8 mm  Projects from plate=4.5 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  15. Trend GB14 Guide bush 14mm diameter
    SKU: GB14

    Trend GB14 Guide bush 14mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=14 mm  Inner diameter=11 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  16. Trend GB22 Guide bush 22mm diameter
    SKU: GB22

    Trend GB22 Guide bush 22mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=22 mm  Inner diameter=19 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  17. Trend GB30 Guide bush 30mm diameter (from plate 6mm)
    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=30 mm  Inner diameter=27 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  18. Trend CTI/60/PK1 Cable tidy insert light grey 60mm
    SKU: CTI/60/PK1

    Trend CTI/60/PK1 Cable tidy insert light grey 60mm

    Plastic cable tidy inserts

    £7.31 Excl. VAT £8.77 Incl. VAT

    Out of stock

    Size=60 mm  Colour=Light grey
  19. Trend GB78 Guide bush 7.8mm x 4mm CDJ300/01
    SKU: GB78

    Trend GB78 Guide bush 7.8mm x 4mm CDJ300/01

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=7.8 mm  Projects from plate=4 mm  Diameter of plate=60 mm  Csk screw hole centres=50 mm
  20. Trend GB318 Guide bush 31.8mm (1-1/4) diameter
    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=31.8 mm  Outside diameter=1 1/4"  Inner diameter=28.8 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  21. Trend ZIP/170/3 Zipbolt 170mm pack of three with hex bit
    SKU: ZIP/170/3

    Trend ZIP/170/3 Zipbolt 170mm pack of three with hex bit

    Zipbolt Worktop Connectors

    £7.73 Excl. VAT £9.28 Incl. VAT

    Total length=170 mm  
  22. Trend GB254 Guide bush 25.4mm (1 Inch) diameter
    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=25.4 mm  Outside diameter=1"  Inner diameter=22.4 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  23. Trend GB774 Guide bush 7.74mm x 6mm DJ300/01
    SKU: GB774

    Trend GB774 Guide bush 7.74mm x 6mm DJ300/01

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=7.74 mm  Inner diameter=6.5 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  24. Trend GB18 Guide bush 18mm diameter
    SKU: GB18

    Trend GB18 Guide bush 18mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=18 mm  Inner diameter=15 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  25. Trend GB28 Guide bush 28mm diameter
    SKU: GB28

    Trend GB28 Guide bush 28mm diameter

    Guide Bush Metal

    £7.53 Excl. VAT £9.04 Incl. VAT

    Outside diameter=28 mm  Inner diameter=25 mm  Projects from plate=6 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm

Back top top

1-25 of 40

Page:
  1. 1
  2. 2
Contact Us