JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 52

Page:
  1. 1
  2. 2
  3. 3
  1. Trend PC/10/M Panel butt connectors 10
    SKU: PC/10/M

    Trend PC/10/M Panel butt connectors 10

    Worktop Connectors 150 mm OL

    £8.13 Excl. VAT £9.76 Incl. VAT

    Total length=150 mm  
  2. Trend CJ/BUSH Bush for COMBI66 151 & 1002 30mm dia 45mm
    £8.13 Excl. VAT £9.76 Incl. VAT

    Diameter=30 mm  Overall length=45 mm  Pin length=15 mm  Pin diameter=10 mm  Min. jig thickness=16 mm  Suits jig=COMBI66, COMBI151, COMBI1001, COMBI1002
  3. Trend CST/635/PK1 Cutter storage tray 1/4 inch 4 pack
    £9.76 Excl. VAT £11.71 Incl. VAT

    Length=108 mm  Width=79 mm  Height=20 mm
  4. Trend CST/127/PK1 Cutter storage tray 1/2 inch 4 pack
    £9.76 Excl. VAT £11.71 Incl. VAT

    Length=108 mm  Width=79 mm  Height=20 mm
  5. Trend PRESSURE/1 Finger pressure 193X82X12.7mm
    £7.60 Excl. VAT £9.12 Incl. VAT

    Length=193 mm  Thickness=12 mm  Depth=81 mm
  6. Trend TEMP/IN/TUL Template inlay tulip
    £9.25 Excl. VAT £11.10 Incl. VAT

    Out of stock

    Width=137 mm  Height=135 mm  Thickness=6 mm
  7. Trend TEMP/IN/STA Template inlay star
    £9.25 Excl. VAT £11.10 Incl. VAT

    Width=146 mm  Height=139 mm  Thickness=6 mm
  8. Trend TEMP/IN/CLO Template inlay clover
    £9.25 Excl. VAT £11.10 Incl. VAT

    Width=163 mm  Height=163 mm  Thickness=6 mm
  9. Trend TEMP/IN/FIS Template inlay fish
    £9.25 Excl. VAT £11.10 Incl. VAT

    Width=171 mm  Height=126 mm  Thickness=6 mm
  10. Trend TEMP/IN/HEA Template inlay heart
    £9.25 Excl. VAT £11.10 Incl. VAT

    Width=177 mm  Height=160 mm  Thickness=6 mm
  11. Trend TEMP/IN/SWA Template inlay swan
    £9.25 Excl. VAT £11.10 Incl. VAT

    Width=182 mm  Height=220 mm  Thickness=6 mm
  12. Trend TEMP/IN/DIA Template inlay diamond
    £9.25 Excl. VAT £11.10 Incl. VAT

    Width=185 mm  Height=132 mm  Thickness=6 mm
  13. Trend TEMP/IN/PIG Template inlay pig
    £9.25 Excl. VAT £11.10 Incl. VAT

    Width=188 mm  Height=148 mm  Thickness=6 mm
  14. Trend TEMP/IN/FDL Template inlay fleur de lys
    £8.80 Excl. VAT £10.56 Incl. VAT

    Out of stock

    Width=197 mm  Height=239 mm  Thickness=6 mm
  15. Trend VJS/G/CB Varijig system guide connect block
    £7.71 Excl. VAT £9.25 Incl. VAT

    Out of stock

  16. Trend CTI/105/PK1 Cable tidy insert grey 105mm
    SKU: CTI/105/PK1

    Trend CTI/105/PK1 Cable tidy insert grey 105mm

    Plastic cable tidy inserts

    £8.13 Excl. VAT £9.76 Incl. VAT

    Size=105 mm x 55 mm  Slot size=3.1 mm x 69 mm  D slot size small=9.5 mm x 8.5 mm  D slot size large=18.5 mm x 20 mm  Colour=light grey
  17. Trend CTI/105/PK3 Cable tidy insert black 105mm
    SKU: CTI/105/PK3

    Trend CTI/105/PK3 Cable tidy insert black 105mm

    Plastic cable tidy inserts

    £8.13 Excl. VAT £9.76 Incl. VAT

    Size=105 mm x 55 mm  Slot size=3.1 mm x 69 mm  D slot size small=9.5 mm x 8.5 mm  D slot size large=18.5 mm x 20 mm  Colour=black
  18. Trend CTI/80/PK1 Cable tidy insert light grey 80mm
    SKU: CTI/80/PK1

    Trend CTI/80/PK1 Cable tidy insert light grey 80mm

    Plastic cable tidy inserts

    £9.76 Excl. VAT £11.71 Incl. VAT

    Size=80 mm  Colour=Light grey
  19. Trend CTI/80/PK3 Cable tidy insert black 80mm
    SKU: CTI/80/PK3

    Trend CTI/80/PK3 Cable tidy insert black 80mm

    Plastic cable tidy inserts

    £9.76 Excl. VAT £11.71 Incl. VAT

    Size=80 mm  Colour=Black
  20. Trend CTI/80/PK2 Cable tidy insert brown 80mm
    SKU: CTI/80/PK2

    Trend CTI/80/PK2 Cable tidy insert brown 80mm

    Plastic cable tidy inserts

    £9.76 Excl. VAT £11.71 Incl. VAT

    Size=80 mm  Colour=Brown
  21. Trend CLT/NUT/T2 Collet nut for T2
    £9.25 Excl. VAT £11.10 Incl. VAT

    D=17 (A/F) mm  
  22. Trend CLT/NUT/T10 Collet nut for T10 & T11 router
    £8.59 Excl. VAT £10.31 Incl. VAT

    D=22 (A/F) mm  Thread=M22x1.0mm  
  23. Trend CLT/NUT/T9 Collet nut for T9 router
    £9.25 Excl. VAT £11.10 Incl. VAT

    Out of stock

    D=22 (A/F) mm  Thread=M22x1.0mm
  24. Trend GB158 Guide bush 15.8mm x 6mm CDJ300
    SKU: GB158

    Trend GB158 Guide bush 15.8mm x 6mm CDJ300

    Guide Bush Metal

    £7.82 Excl. VAT £9.38 Incl. VAT

    Outside diameter=15.8 mm  Outside diameter=5/8"  Inner diameter=14 mm  Projects from plate=6 mm  ID=14 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  25. Trend CE/NUT Collet extension collet nut
    £9.25 Excl. VAT £11.10 Incl. VAT

    D=22 (A/F) mm  Thread=M22x1.0mm

Back top top

1-25 of 52

Page:
  1. 1
  2. 2
  3. 3
Contact Us