JIGS, TABLES & ACCESSORIES
Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.
IMPORTANT SAFETY NOTICE for 2018
240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK
Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911 www.trend-uk.com
-
-
SKU: NVRS/2/240V
Trend NVRS/2/240V No volt release switch 240V
£70.00 Excl. VAT £84.00 Incl. VATVoltage=240v Plug=13amp Max. load=12amp -
SKU: CE/127635
Trend CE/127635 Collet extension 1/2" shank 1/4" collet
£73.38 Excl. VAT £88.06 Incl. VAT -
SKU: CDJ600/01
Trend CDJ600/01 Craft dovetail 600mm 1/4 half blind
£74.34 Excl. VAT £89.21 Incl. VATMaterial thickness.=8 mm - 12 mm Material width up to=600 mm -
SKU: RT/FENCE/A
Trend Router table back fence
£77.95 Excl. VAT £93.54 Incl. VATBack fence height=68 mm Back fence length=595 mm Dust spout aperture=57 mm Edge planing up to=1.4 & 2.4 mm Requires Table top slot width=8.5 mm Table top slot length=100 mm Table slot centres=408 mm -
SKU: DGP/IP/CF
TREND DGP/IP/CF DG/PRO INNER PLATE CURVED FAN
£82.04 Excl. VAT £98.45 Incl. VATOut of stock
-
SKU: VARIJIG
Trend VARIJIG Varijig system adjustable frame
£82.05 Excl. VAT £98.46 Incl. VATExtrusion width=54mm Extrusion height=15.8mm -
-
SKU: RTS/1000
Trend RTS/1000 Router T square 1000mm
£73.38 Excl. VAT £88.06 Incl. VATOverall length=1060 mm Blade size=1000m x 6 mm Butt size= 300 mm x 16 mm Square tolerance=0.5mm over 1m. -
SKU: CDJ600/02
Trend CDJ600/02 Craft dovetail 600mm 1/2 comb box
£76.23 Excl. VAT £91.48 Incl. VATMaterial thickness.=8 mm - 20 mm Material width up to=600 mm -
SKU: VJS/AG/36
Trend VJS/AG/36 Varijig Variable Angle Guide 36 inch 915mm
£80.13 Excl. VAT £96.16 Incl. VAT -
SKU: DGP/IP/SF
TREND DGP/IP/SF DG/PRO INNER PLATE STRAIGHT FAN
£82.04 Excl. VAT £98.45 Incl. VATOut of stock
-
-
£73.38 Excl. VAT £88.06 Incl. VAT
Out of stock
-
-
SKU: VJS/G/100
Trend VJS/G/100 Varijig system straight guide 2.54 metre
£78.40 Excl. VAT £94.08 Incl. VAT -
SKU: DGP/IP/HR
TREND DGP/IP/HR DG/PRO INNER PLATE HOT ROD
£82.04 Excl. VAT £98.45 Incl. VATOut of stock
-
-
SKU: CE/127127
Trend CE/127127 Collet extension 1/2" shank 1/2" collet
£73.38 Excl. VAT £88.06 Incl. VAT -
SKU: AQ21/W/25
Trend AQ21/W/25 Aqua 21 style white 25M
£74.10 Excl. VAT £88.92 Incl. VATOut of stock
-
SKU: CURV/8X1000
TREND CURV/8X1000 MINI FLEXIBLE CURVE GUIDE 8MM X 1000MM
£76.64 Excl. VAT £91.97 Incl. VAT -
-
SKU: DGP/IP/SS
TREND DGP/IP/SS DG/PRO INNER PLATE STRAIGHT SLOT
£82.04 Excl. VAT £98.45 Incl. VATOut of stock
-
-
£73.38 Excl. VAT £88.06 Incl. VAT