Professional TCT Router Cutters
The Trend Professional range of router bits is designed for the most arduous applications of professional carpenters, builders, and joiners. Tungsten Carbide (TCT) router bits are manufactured using special D-Namic technology and feature specially developed micro-granular tungsten carbide tips from the world’s leading carbide manufacturer. These cutters produce a cleaner cut in hardwoods, softwoods, plywood, MDF, and chipboard.
Professional STC router bits can also be found amounts this rage, they are turned, milled and ground from a single, solid piece of tungsten carbide so they provide the greatest durability when being used under stress load conditions. These bits offer better plunge cutting characteristics than other bits and can be re-sharpened many more times than tungsten carbide tipped cutters. These STC cutters have similar applications to the TCT grade ones and can be used with many different materials. STC rasps can also be used on glass reinforced plastic (GRP).
-
£51.93 Excl. VAT £62.32 Incl. VAT -
SKU: 46/82X1/2TCTrend 46/82X1/2TC Trimming cutter 12.7 mm dia C 38.1mm shank 1/2"
Shank Diameter 1/2"
£55.10 Excl. VAT £66.12 Incl. VATD=1/2 inch D=12.7 mm C=38.1 mm B=12.7 mm A=90 degrees Shank Diameter=1/2 inch
-
£59.63 Excl. VAT £71.56 Incl. VATD=1 5/8 inches D=41.3 mm C=17.5 mm B=9.5 mm B2=12.7 mm R=6.3 mm Shank Diameter=1/2 inch
-
SKU: 46/125X1/2TCTrend 46/125X1/2TC Bearing guided ovolo cutter 6mm dia 24.7mm shank 1/2
Shank Diameter 1/2"
£50.55 Excl. VAT £60.66 Incl. VATD=24.7 mm C=12 mm OL=51 mm B=9.5 mm B2=12.7 mm R=6 mm Shank Diameter=1/2 inch
-
£53.36 Excl. VAT £64.03 Incl. VATD=35 mm OL=60 mm Shank Diameter=1/2 inch Recommended speed=1000-20000 rpm
-
£56.19 Excl. VAT £67.43 Incl. VATD=28.0 mm C=46 mm A=104 degrees (14 degrees) Shank Diameter=1/2 inch
-
£51.10 Excl. VAT £61.32 Incl. VATD=22 mm C=10 mm R=3 mm OL=39 mm Shank Diameter=1/4 inch
-
£53.90 Excl. VAT £64.68 Incl. VATD=19 mm D2=6.5 mm C=11 mm R=4 mm Shank Diameter=1/4 inch
-
£56.19 Excl. VAT £67.43 Incl. VATD=1 inch D=25.4 mm C=45 mm B=25.4 mm A=90 degrees Shank Diameter=1/2 inch
-
SKU: 46/37X1/2TCTrend 46/37X1/2TC Bearing guided chamfer cutter 45 degrees Dia 31.8mm
Shank Diameter 1/2"
£51.64 Excl. VAT £61.97 Incl. VATD=31.8 mm C=12 mm C2=16 mm B=9.5 mm A=45 degrees Shank Diameter=1/2 inch
-
£53.90 Excl. VAT £64.68 Incl. VATD=15/16 inch D=23.7 mm C=3/4 inch C=19.0 mm OL=50.1 mm B=12.7 mm R=42 mm Shank Diameter=1/4 inch
-
SKU: 32/13X1/2LTCTrend 32/13X1/2LTC Stair trenching cutter dia 7/8" LH
Left Hand Rotation 1/2" Shank Dia
£56.71 Excl. VAT £68.05 Incl. VATD=7/8 inch D=22 mm C=26 mm A=95 degrees Shank Diameter=1/2 inch Rotation=Left hand
-
£51.64 Excl. VAT £61.97 Incl. VATD=26 mm C=1 inch C=25.4 mm B=26.0 mm A=90 degrees Shank Diameter=3/8 inch
-
SKU: 34/2TCTrend 34/2TC Slotter 6mm kerf 12mm bore dia 50mm
D=50 mm Bore=12 mm Kerf=6 mm No. of Teeth=4
£53.90 Excl. VAT £64.68 Incl. VATD=50 mm Bore=12 mm Kerf=6 mm No. of Teeth=4
-
SKU: 46/280X1/2TCTrend 46/280X1/2TC Bearing guided cove cutter 12.7mm radius Shank 1/2"
Shank Diameter 1/2"
£57.90 Excl. VAT £69.48 Incl. VATD=34.9 mm C=16 mm B=9.5 mm B2=12.7 mm R=1/2 inch R=12.7 mm Shank Diameter=1/2 inch
-
SKU: 92/11X1/2TCTrend 92/11X1/2TC Cornice cutter 12.7mm
Cornice cutter 12.7mm radius Shank Dia 1/2"
£51.93 Excl. VAT £62.32 Incl. VATD=32 mm C=58 mm R=12.7 mm Shank Diameter=1/2 inch
-
£54.45 Excl. VAT £65.34 Incl. VATD=19 mm C=6 mm C2=22 mm R=3 mm Shank Diameter=1/4 inch
-
SKU: 4/52X1/2TCTrend 4/52X1/2TC Two flute cutter 19.1 mm diameter OL 105mm shank 1/2"
Shank Diameter 1/2"
£58.23 Excl. VAT £69.88 Incl. VATD=19.1 mm C=63 mm OL=105 mm Shank Diameter=1/2 inch
-
£51.93 Excl. VAT £62.32 Incl. VATD=30 mm D2=10.5 mm C=7 mm R=3 mm A=119 degrees Shank Diameter=1/2 inch
-
£55.10 Excl. VAT £66.12 Incl. VATD=1 1/4 inch D=31.7 mm C=25 mm OL=67 mm Shank Diameter=1/2 inch
-
£58.98 Excl. VAT £70.78 Incl. VATD=50 mm Bore=12 mm Kerf=8 mm No. of Teeth=4
-
SKU: S55/10X1/4STCTrend S55/10X1/4STC Aluminium spiral upcut cutter 6.3 mm diameter
Shank Diameter 1/4"
£52.48 Excl. VAT £62.98 Incl. VATOut of stock
D=1/4 inch D=6.3 mm C=20 mm OL=63 mm Shank Diameter=1/4 inch Recommended speed=12000-24000 rpm
-
£56.19 Excl. VAT £67.43 Incl. VATD=24.7 mm B=12.7 mm R=6 mm Shank Diameter=1/4 inch
-
SKU: S60/26X1/4STCTrend S60/26X1/4STC Plastic single flute upcut spiral 6.3x19mm
Shank Diameter 1/4"
£59.73 Excl. VAT £71.68 Incl. VATD1=1/4 inches D1=6.3 mm Cut length=3/4 inches Cut length=19 mm Overall length=51 mm Shank Diameter=1/4
-
£50.55 Excl. VAT £60.66 Incl. VATD=16 mm C=50 mm OL=103.0 mm Shank Diameter=1/2 inch
