For worktops up to 1000mm wide. Now with cable tidy insert and circular hinge cut apertures.
A single female and male template in 16mm solid laminate.
Facility to join boards between 450mm to 1000mm wide.
Facility to cut 22.5-degree mitred corners for hob units.
built-in template slots for mitring and rounding of peninsular worktop corners for cable tidy inserts. A circular concealed hinge aperture. 3/4 inch BSP holes for mixer taps.
3 alloy location bushes and a width-setting stop.
Colour-coded pin location for fast and simple use.
4 bolt recess slots for connection bolts, allowing for the bolts in 600mm wide worktop.
Cuts out of square joints (max. 3 degrees).
Guide bush and router cutter checker.
35mm hole for 3/4" BSP mixer tap, and two 25mm holes for bridge/bed mixer tap at 180mm centres.
This jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity. Minimum 1300 watts.
A template guide bush, 30mm outside diameter ref. GB30
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two 100mm (4 inch) throat clamps.