Trend COMBI66 Worktop Jig 500-650mm Peninsular
This worktop jig is designed to facilitate all 1/2" shank plunge routers to cut detailed butt & scribe joints in post-form work tops.
Crafted from durable solid laminate.
Can produce a joint in just 15 minutes including set-up time.
Joints which are out-of-square can be accommodated.
Can be used to cut several widths of board and thicknesses up to 42mm.
Built-in panel bolt connector recessing template with easy access for spanners.
Width setting stop for exact positioning.
Supplied with understandable & comprehensive instructions for use.
A single female and male template in 16mm solid laminate.
Facility to join boards between 500mm and 650mm wide. Two bolt recess slots for connecting bolts.
Width setting stop and three alloy location bushes.
Cuts out of square joints (max. 3-degree).
This jig requires:
A portable plunge router with 12.7mm (1/2?) shank capacity and 1300 watts minimum.
A template guide bush with outside diameter 30mm Ref. GB30
A TCT router cutter with 50mm (2?) cut length and 12.7mm (1/2?) diameter.
Two 100mm (4?) throat clamps.