Our other sites:

196.5 GBP
Trend H/JIG/B Hinge jig B two part phenolic
Trend H/JIG/B Hinge jig B two part phenolic
Two-part trade hinge jig for cutting hinge recesses in doors and frames.
Durable template in 12mm phenolic plastic.
Two-part, separates into two lengths with dovetail joint.
One set up for door and door frame. Don?t need to adjust for repeated doors.
Four variable apertures.
For 2 metre doors the hinges are placed 6? down and 9? up and in the middle. Fourth hinge needed for fire doors (355mm /14? down from top of top hinge).
For doors 16mm to 51mm thick with separate / plant on stops, or thin stops less than 11mm.
Swivel end plate for 3mm gap at head of door.
Use with a light-duty plunge router with ??collet.
Supplied with 3 bradawls, 3 edge guides and a 16 mm guide bush.
Unibase may be required.
T4EK router requires a ref. UNIBASE or special hinge jig guide bush ref. GB/T4/160.
Trend H/JIG/B
£196.50 Excl. VAT £235.80 Incl. VAT

Availability: In stock

The hinge sizes possible  Length=50 mm (2") to 127 mm (5")  Width min.=9.5 mm (3/8")  Width max.=35 mm (1 3/8")     Door size possible  Height min=1955 mm (6' 5")  Height max.= 2100 mm*  Thickness min.= 16 mm (5/8")  Thickness max.=51 mm (2")  Jig overall length=1815 mm  * Please note for doors over 2000mm the bottom hinge will be higher than 9" up.
Product Includes
3 x Bradawls with spacers
3 x Edge guides
1 x 16mm guide bush
1 x Hex key
1 x Carry case
Contact Us