WE ARE OPEN

Our other sites:

95.33 GBP
TREND KWJ700S MULTI-MATERIAL SQUARE EDGE KITCHEN WORKTOP JIG 700MM
TREND KWJ700S MULTI-MATERIAL SQUARE EDGE KITCHEN WORKTOP JIG 700MM
KWJ700S
Worktop jig for use on square edge and standard kitchen worktop.
Quick and easy set up.
Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up.
Use on composite square edge, laminate and solid wood worktops.
For square edge and small radius edge worktops to produce a neater joint.
For standard radius edge postform laminate worktops.
Preset kitchen worktop widths for ease of set up.
Left and right hand joints for most kitchen layouts.
Precise fit ABS plastic location pins for accuracy.
10mm offset cut for composite, solid wood and square edge worktop.
35mm offset cut for standard laminate postform worktop.
Preset for worktop widths 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 635mm, 650mm and 700mm.
35mm hinge recess facility
Three open ended dog bone style bolt recess
Radius curves at 40mm, 100mm and 400mm.
45 degree end cut.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter ref. GB30.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two clamps.
Trend - KWJ700S
£95.33 Excl. VAT £114.40 Incl. VAT
Out of Stock
Specification
Length=985 mm  Width=390 mm  Thickness=12 mm  Weight=5.4 kg  End cut=45 degrees  Corner Radius=40 mm  Corner Radius=100 mm  Corner Radius=400 mm  Female cut material width loss (inset)=10mm and 35 mm  Guide bush=30 mm  Plunge router=1/2-inch (min. 1300 watts)  Cutter=12.7 mm x 50 mm cut  Clamps=Two
Contact Us