The Professional portable router table has an aluminium table surface and back fence and can be used on the floor or bench mounted. The back fence has squareness adjustment, for absolute accuracy. Has T11E quick release fixing holes for fitting T11 fixing kit. Has bench leg level adjustment for when bench mounted. Has a 20mm hole for the T11 Quick Raiser adjuster handle.
Has removable legs and adjustment for use on uneven floors.
Die-formed 8mm thick aluminium alloy table top with minimal loss to cutter depth. Cutter aperture is 90mm to allow for use of the largest router cutters and bits available.
Cast back fence with extruded variable alloy cheeks and 'T' slots.
Made to EN standards. Back fence accuracy is 0.5-degree & table flatness of 0.5mm.
Its size and weight enable easy re-positioning around the workshop and transportation for using on-site.
Removable centre plate can be re-drilled for use with other makes and models of medium & heavy duty routers.
Router, spelch block and fine height adjuster are not included.
Ideal for using on site.
115v routers over 1850W (including T10 and T11) cannot be used with no volt release switch router tables.