Trend T10ELK Router 1/2 2000w var 115V & kitbox
Ideal for use by tradesmen when on site or in a workshop.
With an electronic full wave adjustable control of the spindle speed under load which gives a fine finish on all materials.
The soft start prevents sudden movement of the machine on start-up.
two column precision base which has large phosphor bronze bushes for accuracy when plunging.
With spindle lock and hex collet nut which allows easy cutter changes with the 22mm spanner (supplied).
With adjustable twin rod parallel side-fence guide with built-in micro-adjuster for straight edge work.
Has a precision machined one-piece multi-slit collet for fail-safe grip of cutter or bit shank.
3 position revolving depth stop for fast adjustable settings.
With variable inner plate for guide bush accuracy.
perfect for onsite use.
All the 115v routers which are over 1850W require a 32A BS4343 115v plug.
The minimum generator or transformer requirement is 3 kVA continuous with a 32A BS4343 115v socket outlet.
The 115v units cannot be used on the no-volt release switch CRT/L and PRT/L router tables.