Variable speed workshop router featuring a built in Quick Raiser fine adjuster.
With soft start to eliminate any sudden movement of the machine on start up, and an electronic full wave variable control for the spindle speed under load, to produce a fine finish on all types of material.
The precision base has 2 columns and large phosphor bronze bushes for accurate plunging.
The spindle lock with the hex collet nut makes cutter changes simple with the 22mm spanner that comes supplied with the router.
For straight edge work there is an adjustable twin rod parallel side-fence guide with built in micro-adjuster. The multi-slit collet is precision machined from one-piece for dependable grip of the cutter shank.
With adjustable inner plate for guide bush precision.
The 3-position revolving depth stop allows for swift adjustable settings.
Fine height adjuster for above and below height adjustment, ideal for when the router is fitted into a router table. A single revolution of the handle equals 1.5mm.
Features 3 quick release recesses in rotuer base to fit router tables in combination with the optional Quick Release Kit, as well as fittings for the optional Clamp Guide System Kit.
The extra-large aperture in the base means it can accommodate large cutters.
Includes a quick release dust spout.
Perfect for using on site.
Minimum generator or transformer requirement 3 kVA continuous with a 32A BS4343 115v socket outlet.
All 115v routers over 1850W require a 32A BS4343 115v plug.
115v units cannot be used on the no-volt release switch PRT/L and CRT/L router tables.
Three year extended warranty on router with online registration with Trend (UK and Eire only)