JIGS, TABLES & ACCESSORIES
Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.
IMPORTANT SAFETY NOTICE for 2018
240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK
Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911 www.trend-uk.com
-
SKU: MAG/PACK/1
Trend MAG/PACK/1 Magnet pack 15mm x3mm pack of Four
£10.89 Excl. VAT £13.07 Incl. VATSize=15 mm x 3 mm Gauss measurement=3200 -
-
-
-
SKU: PRESSURE/1
Trend PRESSURE/1 Finger pressure 193X82X12.7mm
£10.89 Excl. VAT £13.07 Incl. VATLength=193 mm Thickness=12 mm Depth=81 mm -
SKU: SPAN/15
Trend SPAN/15 Spanner 15mm A/F forged
£6.39 Excl. VAT £7.67 Incl. VATOut of stock
15 mm A/F -
-
-
-
-
SKU: PUSHSTICK/1
Trend PUSHSTICK/1 Pushstick plastic 1 off 420mm OL
£7.49 Excl. VAT £8.99 Incl. VATOverall length=420 mm -
-
-
-
£7.80 Excl. VAT £9.36 Incl. VAT
-
£7.80 Excl. VAT £9.36 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
SKU: INS/W6/10
Trend INS/W6/10 Insert for wood M6 10
£5.44 Excl. VAT £6.53 Incl. VATThread=M6 Hole size=9 mm -
SKU: INS/W8/10
Trend INS/W8/10 Insert for wood M8 10
£7.80 Excl. VAT £9.36 Incl. VATThread=M8 Hole size=11 mm -
SKU: INS/P6/10
Trend INS/P6/10 Insert plastics M6 (10)
£6.18 Excl. VAT £7.42 Incl. VATThread=M6 Hole size=8 mm Length=12.6 mm Lip dia=9.5 mm Body di=8.2 mm -
£10.16 Excl. VAT £12.19 Incl. VAT
-
-
-
-
-
-
-
-
SKU: BSC/20/100
Trend BSC/20/100 Biscuit No 20 100 off
£8.68 Excl. VAT £10.42 Incl. VATSize=60 mm x 23 mm x 4 mm For board thickness=19 mm+ -
SKU: BSC/10/100
Trend BSC/10/100 Biscuit No 10 100 off
£8.68 Excl. VAT £10.42 Incl. VATSize=53 mm x 19 mm x 4 mm For board thickness=13 mm - 18 mm -
SKU: BSC/0/100
Trend BSC/0/100 Biscuit No 0 100 off
£8.68 Excl. VAT £10.42 Incl. VATSize=47.5 mm x 15.5 mm x 4 mm For board thickness=8 mm - 12 mm -
£8.68 Excl. VAT £10.42 Incl. VATSize 0=47.5 mm x 15.5 mm x 4 mm For board thickness=8 mm - 12 mm Size 10=53 mm x 19 mm x 4 mm For board thickness=13 mm - 18 mm Size 20=60 mm x 23 mm x 4 mm For board thickness=19 mm+
-
£12.33 Excl. VAT £14.80 Incl. VATTotal length=150 mm
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
-
SKU: 2608570048.00
Trend 2608570048 Collet new type Bosch POF600 1/4 inch
£12.69 Excl. VAT £15.23 Incl. VATOut of stock
-
-
-
-
SKU: 6053.00
Trend 6053 Collet cone 1/4 Makita 3700 (06053)
£6.00 Excl. VAT £7.20 Incl. VATOut of stock
-
£5.90 Excl. VAT £7.08 Incl. VAT
-
-
SKU: CLT/NUT/T10
Trend CLT/NUT/T10 Collet nut for T10 & T11 router
£12.29 Excl. VAT £14.75 Incl. VAT -
£5.90 Excl. VAT £7.08 Incl. VAT
-
£5.73 Excl. VAT £6.88 Incl. VAT
-
£5.73 Excl. VAT £6.88 Incl. VAT
-
-
-
-
-
SKU: BEAM/005
Trend BEAM/005 Beam trammel 005
£9.29 Excl. VAT £11.15 Incl. VATTo suit rod diameter=8 mm Suitable for routers with 8mm dia. side fence rods eg Trend T5 Dewalt DW613, DW615 Elu MOF96 -
-
-
SKU: CLT/SLV/10127
Trend CLT/SLV/10127 Collet sleeve 10mm to 12.7mm
£13.26 Excl. VAT £15.91 Incl. VAT -
-
-
-
SKU: CLT/SLV/95127
Trend CLT/SLV/95127 Collet sleeve 9.5mm to 12.7mm
£13.26 Excl. VAT £15.91 Incl. VAT -
SKU: CLT/SLV/63127
Trend CLT/SLV/63127 Collet sleeve 6.35mm to 12.7mm
£13.26 Excl. VAT £15.91 Incl. VAT -
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.89 Excl. VAT £13.07 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£13.26 Excl. VAT £15.91 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£13.75 Excl. VAT £16.50 Incl. VAT
-
£5.44 Excl. VAT £6.53 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
SKU: GB/COLL/25454
Trend GB/COLL/25454 Guide bush collar 25.4mm to 53.9mm
Aluminium guide bush collars
£7.80 Excl. VAT £9.36 Incl. VATID=25.4 mm OD=53.9 mm Use with guide bush dia=25.4 mm Use with cutter dia.=14.3 mm -
SKU: GB/COLL/7914
Trend GB/COLL/7914 Guide bush collar 7.9mm to 14.28mm
Aluminium guide bush collars
£7.80 Excl. VAT £9.36 Incl. VATID=7.9 mm OD=14.3 mm Use with guide bush dia=7.93 mm Use with cutter dia.=3.2 mm -
£7.80 Excl. VAT £9.36 Incl. VATID=20 mm OD=40 mm Use with guide bush dia=20 mm Use with cutter dia.=10 mm
-
£7.80 Excl. VAT £9.36 Incl. VATID=30 mm OD=54 mm Use with guide bush dia=30 mm Use with cutter dia.=12 mm
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£11.20 Excl. VAT £13.44 Incl. VAT
-
£7.80 Excl. VAT £9.36 Incl. VATID=16 mm OD=30 mm Use with guide bush dia=16 mm Use with cutter dia.=7 mm
-
£7.31 Excl. VAT £8.77 Incl. VAT
Out of stock