WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

12 Item(s)

  1. Trend CE/127127 Collet extension 1/2" shank 1/2" collet
    £73.38 Excl. VAT £88.06 Incl. VAT

  2. Trend CE/CNS/8 Collet extension collet & nut set 8mm
    £51.76 Excl. VAT £62.11 Incl. VAT

    Bore=8 mm
  3. Trend CE/CNS/635 Collet extension collet & nut set 1/4" (6.35mm)
    £51.76 Excl. VAT £62.11 Incl. VAT

    Bore=1/4 inch
  4. Trend CE/CNS/127 Collet extension collet & nut set 1/2"
    £51.76 Excl. VAT £62.11 Incl. VAT

    Bore=1/2 inch
  5. Trend CE/CNS/8/635 Collet extension 8mm collet nut set 1/4" (6.35mm)
    £26.33 Excl. VAT £31.60 Incl. VAT

    Bore=6.35 mm  Bore=1/4 inch
  6. Trend CE/NUT/8 Collet extension 8mm collet nut
    £9.29 Excl. VAT £11.15 Incl. VAT

    D=17 (A/F) mm  Thread=M17x0.75mm
  7. Trend CE/1212 Collet extension 12mm shank 12mm collet
    £73.38 Excl. VAT £88.06 Incl. VAT

    Shank size=12 mm  Collet bore=12 mm  Overall length=85 mm  Maximum speed=18000 rpm  Maximum tool dia=50 mm  Maximum tool cut=30 mm
  8. Trend CE/128 Collet extension 12mm shank 8mm collet
    £73.38 Excl. VAT £88.06 Incl. VAT

    Shank size=12 mm  Collet size d=8 mm  Overall length=72 mm  Maximum speed=18000 rpm  Maximum tool dia=50 mm  Maximum tool cut=30 mm  
  9. Trend CE/88 Collet extension 8mm shank 8mm collet
    £52.76 Excl. VAT £63.31 Incl. VAT

    Shank size=8 mm  Collet bore=8 mm  Overall length=64 mm  Nut dia. max.=19 mm  Maximum speed=18000 rpm  Maximum tool dia=35 mm  Maximum tool cut=25 mm  Requires spanners=12 mm & 17 mm A/F  
  10. Trend CE/127635 Collet extension 1/2" shank 1/4" collet
    £73.38 Excl. VAT £88.06 Incl. VAT

    Shank size=1/2 inch (12.7 mm)  Collet bore=1/4 inch (6.35 mm)  Overall length=85 mm  Nut dia. max.=25 mm  Maximum speed=18000 rpm  Maximum tool dia=50 mm  Requires spanners=19 mm & 22 mm A/F
  11. Trend CE/8635 Collet extension 8mm shank 1/4" collet
    £52.76 Excl. VAT £63.31 Incl. VAT

    Shank Dia size=8 mm  Collet bore=6.35 mm (1/4 inch)  Overall length=64 mm  Nut dia. max.=19 mm  Maximum speed=18000 rpm  Maximum tool dia=35 mm  Maximum tool cut=25 mm  Requires spanners=12 mm & 17 mm A/F
  12. Trend CE/CNS/8/8 Collet extension 8mm collet nut set 8mm
    £26.33 Excl. VAT £31.60 Incl. VAT

    Bore=8 mm

Back top top

12 Item(s)

Contact Us