Our other sites:


Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.


240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

12 Item(s)

  1. Trend N/COMPASS/AEX Router Compass 8mm extension Bars
    £27.05 Excl. VAT £32.46 Incl. VAT

    Radius increase=440 mm
  2. Trend TEMP/NUC/57 Template set number 57mm uppercase
    £27.86 Excl. VAT £33.43 Incl. VAT

    Size=360 x 110 x 5 mm
  3. Trend VJS/FJK Varijig system frame Jointing kit
    £26.14 Excl. VAT £31.37 Incl. VAT

  4. Trend Hot rod 400mm Stainless Steel one off
    SKU: HR/400

    Trend Hot rod 400mm Stainless Steel one off

    Stainless Steel hot rod

    £24.16 Excl. VAT £28.99 Incl. VAT

    Overall length=400 mm  Diameter=12 mm  
  5. Trend D/LIFT/A Door lifter
    £20.36 Excl. VAT £24.43 Incl. VAT

    Weight=303 g  Lifts to height=38 mm  Maximum door weight=108 kg  Size=254 mm x 44 mm x 75 mm
  6. Trend D/LIFT/B Door & board lifter swivel type
    £22.44 Excl. VAT £26.93 Incl. VAT

    Lifts to height=60 mm  Maximum door weight=75 kg  Size=315 mm x 80 mm x 80 mm  Weight=688 g
  7. Trend CASE/HJ/A Fabric carry case for H/JIG/A
    £24.70 Excl. VAT £29.64 Incl. VAT

    Length outside=1250 mm  Height outside=160 mm
  8. Trend CASE/HJ/C Fabric carry case for H/JIG/C
    £24.70 Excl. VAT £29.64 Incl. VAT

    Out of stock

    Length outside=1325mm  Height outside=160 mm
  9. Trend CRB/CR CRB cranked rods

    Trend CRB/CR CRB cranked rods

    Combination router base cranked rods

    £23.23 Excl. VAT £27.88 Incl. VAT

    Diameter=7 mm  Rod centres=60.3 mm to 174 mm
  10. Trend CRB/SF CRB side fence

    Trend CRB/SF CRB side fence

    Combination router base side fence

    £20.36 Excl. VAT £24.43 Incl. VAT

    Length=270 mm  Width=35 mm  Thickness=15 mm  Cutter diameter max.=30 mm
  11. Trend D/CLAMP/A Door clamp ratchet type
    £26.33 Excl. VAT £31.60 Incl. VAT

    Maximum door thickness=55 mm
  12. Trend M/KWS01 Kitchen Worktop Jig Offset Scriber
    £24.85 Excl. VAT £29.82 Incl. VAT

    Offset=8.65 mm  Use with jigs=All Trend worktop jigs  Use with jigs= That use a 30mm guide and 12.7mm cutter

Back top top

12 Item(s)

Contact Us