JIGS, TABLES & ACCESSORIES
Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.
IMPORTANT SAFETY NOTICE for 2018
240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK
Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911 www.trend-uk.com
-
SKU: SM/MKP
Trend SM/MKP Scribe-Master Quick Mount Kit
£31.41 Excl. VAT £37.69 Incl. VATMitre saw stand requirements Mounting brackets with slots to accept 8mm bolts. SM/PRO mounting bracket hole positions Centre to centre (D)=195 mm to 280mm Centre to centre (W)=399 mm -
SKU: TEMP/SSD/5MM
Trend TEMP/SSD/5MM Template shelf support drill bit guide
£33.24 Excl. VAT £39.89 Incl. VATDrill diameter=5 mm -
-
SKU: INLAY/KIT/A
Trend INLAY/KIT/A Inlay kit with 3.2mm cutter 1/4 Solid tungsten
£30.96 Excl. VAT £37.15 Incl. VATGuide bush ID=4.8 mm Guide bush OD=7.9 mm Collar OD=14.28 mm Cutter D=1/8 inch Cutter D=3.2 mm Cutter C=1/2 inch Cutter C=12.7 mm Cutter OL=50.8 mm Shank Diameter=1/4 inch -
-
SKU: VJS/PCK/L
Trend VJS/PCK/L Varijig ex-long pivot clamp (pair)
£30.31 Excl. VAT £36.37 Incl. VATClamp thickness max.=51 mm -
SKU: VJS/CK
Trend VJS/CK Varijig system clamp kit (Pair)
£31.90 Excl. VAT £38.28 Incl. VATClamp thickness max.=32mm -
SKU: ELLIPSEJ/1
Trend ELLIPSEJ/1 Extension bar 500mm x 12.7mm
£36.86 Excl. VAT £44.23 Incl. VAT500 mm x 12.7 mm -
£32.80 Excl. VAT £39.36 Incl. VATLipping width with copy follower max.=16 mm Lipping width without copy follower max.=25 mm Lipping projection max.=6 mm Cutter diameter max.=25 mm Length=210 mm Width=65 mm Thickness=7 mm
-
SKU: OFS/BASE
Trend OFS/BASE Offset router base
£36.61 Excl. VAT £43.93 Incl. VATSize=280 x 180 x8 mm Aperture dia.=40 mm Max. cutter dia.=36 mm -
SKU: CASE/1001
Trend CASE/1001 Carry case for KWJ700/900 and COMBI1002
£34.85 Excl. VAT £41.82 Incl. VATLength outside=1250 mm Height ouside=415 mm