Our other sites:


Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.


240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

4 Item(s)

  1. Trend SM/MKP Scribe-Master Quick Mount Kit
    £31.41 Excl. VAT £37.69 Incl. VAT

    Mitre saw stand requirements  Mounting brackets with slots to accept 8mm bolts.  SM/PRO mounting bracket hole positions  Centre to centre (D)=195 mm to 280mm  Centre to centre (W)=399 mm  
  2. Trend SMC/02X1/4HSS Scribe-Master cutter 4x40x100mm x 1/4 HSS
    SKU: SMC/02X1/4HSS

    Trend SMC/02X1/4HSS Scribe-Master cutter 4x40x100mm x 1/4 HSS

    Scribemaster cutter for softwood

    £41.01 Excl. VAT £49.21 Incl. VAT

    D=4 mm  C=40 mm  OL=100 mm  Shank Diameter=1/4 inch  For use on softwood and MDF*  *The abrasive nature of MDF will lead to premature tool wear.
  3. Trend SM/TSP Scribe-Master Tenon Slide Plate
    £54.70 Excl. VAT £65.64 Incl. VAT

    Max. working length=190 mm  Max. tenon length adj.=50 mm  Max. cutter dia.=22 mm
  4. Trend SMC/03X8MMHSS Scribe-Master cutter 4x40x90mm x 8mm HSS

    Trend SMC/03X8MMHSS Scribe-Master cutter 4x40x90mm x 8mm HSS

    Scribemaster cutter for hardwood

    £45.09 Excl. VAT £54.11 Incl. VAT

    D=4 mm  C=40 mm  OL=90 mm  Shank Diameter=8 mm  For use on hardwood

Back top top

4 Item(s)

Contact Us