WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 29

Page:
  1. 1
  2. 2
  1. Trend CTI/80/PK1 Cable tidy insert light grey 80mm
    SKU: CTI/80/PK1

    Trend CTI/80/PK1 Cable tidy insert light grey 80mm

    Plastic cable tidy inserts

    £13.99 Excl. VAT £16.79 Incl. VAT

    Size=80 mm  Colour=Light grey
  2. Trend PC/10/M Panel butt connectors 10
    SKU: PC/10/M

    Trend PC/10/M Panel butt connectors 10

    Worktop Connectors 150 mm OL

    £12.33 Excl. VAT £14.80 Incl. VAT

    Total length=150 mm  
  3. Trend BSJ/PIN/4 BS/JIG 10mm pin pack of 4
    £10.88 Excl. VAT £13.06 Incl. VAT

    D=10 mm
  4. Trend CTI/80/PK3 Cable tidy insert black 80mm
    SKU: CTI/80/PK3

    Trend CTI/80/PK3 Cable tidy insert black 80mm

    Plastic cable tidy inserts

    £13.99 Excl. VAT £16.79 Incl. VAT

    Size=80 mm  Colour=Black
  5. TREND WP-WRT/05 TOP FRAME WRT
    £10.28 Excl. VAT £12.34 Incl. VAT

  6. Trend PRESSURE/3 Side pressure CRT/MK3
    £10.84 Excl. VAT £13.01 Incl. VAT

  7. Trend VJS/G/CB Varijig system guide connect block
    £11.68 Excl. VAT £14.02 Incl. VAT

  8. Trend CTI/80/PK2 Cable tidy insert brown 80mm
    SKU: CTI/80/PK2

    Trend CTI/80/PK2 Cable tidy insert brown 80mm

    Plastic cable tidy inserts

    £13.99 Excl. VAT £16.79 Incl. VAT

    Size=80 mm  Colour=Brown
  9. Trend CLT/NUT/T10 Collet nut for T10 & T11 router
    £12.29 Excl. VAT £14.75 Incl. VAT

    D=22 (A/F) mm  Thread=M22x1.0mm  
  10. Trend GB158 Guide bush 15.8mm x 6mm CDJ300
    SKU: GB158

    Trend GB158 Guide bush 15.8mm x 6mm CDJ300

    Guide Bush Metal

    £11.20 Excl. VAT £13.44 Incl. VAT

    Outside diameter=15.8 mm  Outside diameter=5/8"  Inner diameter=14 mm  Projects from plate=6 mm  ID=14 mm  Plate diameter=60 mm  Csk screw hole centres=50 mm
  11. Trend CRT/3 Hose adaptor 58mm to 39mm
    £14.80 Excl. VAT £17.76 Incl. VAT

    Adaptor OD=58 mm (2-1/4 inch)  Adaptor ID=35 mm (for 39 mm OD hose)
  12. Trend CLT/SLV/63127 Collet sleeve 6.35mm to 12.7mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    D=1/2 inch  D=12.7 mm  OL=30 mm  Bore=1/4 inch  Bore=6.35 mm  
  13. Trend CLT/SLV/812 Collet sleeve 8mm to 12mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    D=12 mm  OL=25 mm  Bore=8 mm  
  14. Trend CLT/SLV/612 Collet sleeve 6mm to 12mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    D=12 mm  OL=30 mm  Bore=6 mm  
  15. Trend 2608570048 Collet new type Bosch POF600 1/4 inch
    £12.69 Excl. VAT £15.23 Incl. VAT

    Out of stock

    d=1/4 inch    Bosch POF52, 400, 500A, POF600ACE, PKF25  Draper PT1200V
  16. Trend CLT/SLV/810 Collet sleeve 8mm to 10mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    D1=10 mm  Overall length=25 mm  Bore=8 mm  
  17. Trend CLT/SLV/8127 Collet sleeve 8mm to 12.7mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    D=1/2 inch  D=12.7 mm  OL=30 mm  Bore=8 mm  
  18. Trend CLT/SLV/95127 Collet sleeve 9.5mm to 12.7mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    D=1/2 inch  D=12.7 mm  OL=30 mm  Bore=3/8 inch  Bore=9.5 mm  
  19. Trend CLT/SLV/6312 Collet sleeve 6.35mm to 12mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    Out of stock

    D=12 mm  OL=30 mm  Bore=1/4 inch  Bore=6.35 mm  
  20. Trend CLT/SLV/10127 Collet sleeve 10mm to 12.7mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    Out of stock

    D=1/2 inch  D=12.7 mm  OL=30 mm  Bore=10 mm  
  21. Trend CLT/SLV/1012 Collet sleeve 10mm to 12mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    D1=12 mm  Overall length=25 mm  Bore=10 mm  
  22. Trend CLT/SLV/895 Collet sleeve 8mm to 9.5mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    D1=9.5 mm  Overall length=25 mm  Bore=8 mm  
  23. Trend CLT/SLV/6127 Collet sleeve 6mm to 12.7mm
    £13.26 Excl. VAT £15.91 Incl. VAT

    D=1/2 inch  D=12.7 mm  OL=30 mm  Bore=6 mm  
  24. Trend MAG/PACK/1 Magnet pack 15mm x3mm pack of Four
    £10.89 Excl. VAT £13.07 Incl. VAT

    Size=15 mm x 3 mm  Gauss measurement=3200
  25. Trend KB13/M/10 Lever M10 x 40 1 off
    £10.89 Excl. VAT £13.07 Incl. VAT

    Thread=M10  Thread length=40 mm  H=45 mm  D=80 mm      Pack of 1

Back top top

1-25 of 29

Page:
  1. 1
  2. 2
Contact Us