JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 41

Page:
  1. 1
  2. 2
  1. Trend CRB/CR CRB cranked rods
    SKU: CRB/CR

    Trend CRB/CR CRB cranked rods

    Combination router base cranked rods

    £16.22 Excl. VAT £19.46 Incl. VAT

    Diameter=7 mm  Rod centres=60.3 mm to 174 mm
  2. Trend D/LIFT/B Door & board lifter swivel type
    £15.67 Excl. VAT £18.80 Incl. VAT

    Lifts to height=60 mm  Maximum door weight=75 kg  Size=315 mm x 80 mm x 80 mm  Weight=688 g
  3. Trend CASE/HJ/A Fabric carry case for H/JIG/A
    £17.26 Excl. VAT £20.71 Incl. VAT

    Length outside=1250 mm  Height outside=160 mm
  4. Trend CASE/HJ/C Fabric carry case for H/JIG/C
    £17.26 Excl. VAT £20.71 Incl. VAT

    Length outside=1325mm  Height outside=160 mm
  5. Trend D/CLAMP/A Door clamp ratchet type
    £18.39 Excl. VAT £22.07 Incl. VAT

    Maximum door thickness=55 mm
  6. Trend CASE/HJ Hinge Jig plastic storage tube
    £15.11 Excl. VAT £18.13 Incl. VAT

  7. Trend CASE/640H COMBI 640H carry case
    £19.47 Excl. VAT £23.36 Incl. VAT

    Handle & velcro lip  Pocket for accessories  Length outside= 830 mm  Height outside= 395 mm
  8. Trend CASE/65 Carry case for COMBI600, 65 & 66
    £16.22 Excl. VAT £19.46 Incl. VAT

    Handle & velcro lip  Length outside= 980 mm  Height outside= 265 mm
  9. Trend M/KWS01 Kitchen Worktop Jig Offset Scriber
    £17.36 Excl. VAT £20.83 Incl. VAT

    Out of stock

    Offset=8.65 mm  Use with jigs=All Trend worktop jigs  Use with jigs= That use a 30mm guide and 12.7mm cutter
  10. Trend DC400/10 DC400 lapped tail pin stops adjustable
    £15.39 Excl. VAT £18.47 Incl. VAT

    Out of stock

  11. Trend CASE/18 Plastic case deal Hire 640H and foam
    £15.11 Excl. VAT £18.13 Incl. VAT

  12. Trend DWL/3/500 Dowels 8 x 40mm 500 off
    SKU: DWL/3/500

    Trend DWL/3/500 Dowels 8 x 40mm 500 off

    Dowels grooved

    £18.89 Excl. VAT £22.67 Incl. VAT

    D=8 mm  Overall length=40 mm  
  13. Trend DWL/2/500 Dowels 8 x 30mm 500 off
    SKU: DWL/2/500

    Trend DWL/2/500 Dowels 8 x 30mm 500 off

    Dowels grooved

    £15.72 Excl. VAT £18.86 Incl. VAT

    D=8 mm  Overall length=30 mm  
  14. Trend CJ/LSK Length stop kit COMBI1001
    £15.72 Excl. VAT £18.86 Incl. VAT

    Suits jig=COMBI66, COMBI650, COMBI651, COMBO1001, COMB1002
  15. Trend TEMP/NUC/57 Template set number 57mm uppercase
    £18.39 Excl. VAT £22.07 Incl. VAT

    Size=360 x 110 x 5 mm
  16. Trend Hot rod 400mm Stainless Steel one off
    SKU: HR/400

    Trend Hot rod 400mm Stainless Steel one off

    Stainless Steel hot rod

    £16.88 Excl. VAT £20.26 Incl. VAT

    Overall length=400 mm  Diameter=12 mm  
  17. Trend VJS/FJK Varijig system frame Jointing kit
    £17.26 Excl. VAT £20.71 Incl. VAT

  18. Trend PJ/CL/G Pin Clamp For Site Jigs
    £18.89 Excl. VAT £22.67 Incl. VAT

  19. Trend M/RBT/PLATE Mini Routabout plate only
    £17.01 Excl. VAT £20.41 Incl. VAT

    Out of stock

  20. Trend N/COMPASS/AEX Router Compass 8mm extension Bars
    £18.89 Excl. VAT £22.67 Incl. VAT

    Radius increase=440 mm
  21. Trend 323421 Collet 12.7mm HItachi M12V2
    £18.60 Excl. VAT £22.32 Incl. VAT

    Out of stock

    d=1/2 inch  Hitachi M12V2
  22. Trend CLT/T2/635 Collet 6.35mm (T2)
    SKU: CLT/T2/635

    Trend CLT/T2/635 Collet 6.35mm (T2)

    T2 Collets

    £18.34 Excl. VAT £22.01 Incl. VAT

    d=1/4 inch  d=6.35 mm  
  23. Trend CNS/T5/8 Collet and nut set T5 8mm
    SKU: CNS/T5/8

    Trend CNS/T5/8 Collet and nut set T5 8mm

    T5 Collets and Nuts

    £15.99 Excl. VAT £19.19 Incl. VAT

    Bore=8 mm  
  24. Trend CNS/T5/635 Collet and nut set T5 6.35mm (1/4)
    SKU: CNS/T5/635

    Trend CNS/T5/635 Collet and nut set T5 6.35mm (1/4)

    T5 Collets and Nuts

    £15.99 Excl. VAT £19.19 Incl. VAT

    Bore=1/4 inch  Bore=6.35 mm  
  25. Trend CLT/T2/6 Collet 6.0mm (T2)
    SKU: CLT/T2/6

    Trend CLT/T2/6 Collet 6.0mm (T2)

    T2 Collets

    £18.89 Excl. VAT £22.67 Incl. VAT

    d=6 mm  

Back top top

1-25 of 41

Page:
  1. 1
  2. 2
Contact Us