WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

1-25 of 49

Page:
  1. 1
  2. 2
  1. Trend PBT/PACK Panel Butt template pack
    £21.16 Excl. VAT £25.39 Incl. VAT

    Size=400 x 200 mm
  2. Trend CASE/1001 Carry case for KWJ700/900 and COMBI1002
    £25.82 Excl. VAT £30.98 Incl. VAT

    Length outside=1250 mm  Height ouside=415 mm
  3. Trend RBT/PLATE Routabout template only RBT-Plate
    £21.24 Excl. VAT £25.49 Incl. VAT

  4. Trend OFS/BASE Offset router base
    £27.13 Excl. VAT £32.56 Incl. VAT

    Size=280 x 180 x8 mm  Aperture dia.=40 mm  Max. cutter dia.=36 mm
  5. Trend DWL/3/500 Dowels 8 x 40mm 500 off
    SKU: DWL/3/500

    Trend DWL/3/500 Dowels 8 x 40mm 500 off

    Dowels grooved

    £20.05 Excl. VAT £24.06 Incl. VAT

    D=8 mm  Overall length=40 mm  
  6. Trend BSC/0/1000 Biscuit No 0 1000 off
    £26.14 Excl. VAT £31.37 Incl. VAT

    Size=47.5 mm x 15.5 mm x 4 mm  For board thickness=8 mm - 12 mm  
  7. Trend BSC/10/1000 Biscuit No 10 1000 off
    £27.25 Excl. VAT £32.70 Incl. VAT

    Size=53 mm x 19 mm x 4 mm  For board thickness=13 mm - 18 mm    
  8. Trend DWL/5/500 Dowels 10 x50mm 500 off
    SKU: DWL/5/500

    Trend DWL/5/500 Dowels 10 x50mm 500 off

    Dowels grooved

    £26.38 Excl. VAT £31.66 Incl. VAT

    D=10 mm  Overall length=50 mm  
  9. Trend DWL/4/500 Dowels 10 x 35mm 500 off
    SKU: DWL/4/500

    Trend DWL/4/500 Dowels 10 x 35mm 500 off

    Dowels grooved

    £23.54 Excl. VAT £28.25 Incl. VAT

    D=10 mm  Overall length=35 mm  
  10. Trend ELLIPSEJ/1 Extension bar 500mm x 12.7mm
    £25.82 Excl. VAT £30.98 Incl. VAT

    500 mm x 12.7 mm
  11. Trend CRB/TB CRB trimming base
    SKU: CRB/TB

    Trend CRB/TB CRB trimming base

    Combination router base trim base

    £24.31 Excl. VAT £29.17 Incl. VAT

    Lipping width with copy follower max.=16 mm  Lipping width without copy follower max.=25 mm  Lipping projection max.=6 mm  Cutter diameter max.=25 mm  Length=210 mm  Width=65 mm  Thickness=7 mm
  12. Trend N/COMPASS/AEX Router Compass 8mm extension Bars
    £20.05 Excl. VAT £24.06 Incl. VAT

    Radius increase=440 mm
  13. TREND GB/5/V SUBBASE MAKITA RT0700C TRIMMER
    £25.93 Excl. VAT £31.12 Incl. VAT

  14. TREND D/SKATE/A DOOR SKATE
    £24.72 Excl. VAT £29.66 Incl. VAT

    Out of stock

  15. Trend GB/5/T Subbase Bosch GKF600
    £26.83 Excl. VAT £32.20 Incl. VAT

  16. TREND CASE/DG CARRY CASE DRAINING GROOVE JIG
    £26.52 Excl. VAT £31.82 Incl. VAT

  17. TREND WRT/3 CASTORS (4 OF) FOR WRT
    £25.46 Excl. VAT £30.55 Incl. VAT

  18. Trend SM/MKP Scribe-Master Quick Mount Kit
    £22.00 Excl. VAT £26.40 Incl. VAT

    Mitre saw stand requirements  Mounting brackets with slots to accept 8mm bolts.  SM/PRO mounting bracket hole positions  Centre to centre (D)=195 mm to 280mm  Centre to centre (W)=399 mm  
  19. Trend INLAY/KIT/A Inlay kit with 3.2mm cutter 1/4 Solid tungsten
    £21.68 Excl. VAT £26.02 Incl. VAT

    Guide bush ID=4.8 mm  Guide bush OD=7.9 mm  Collar OD=14.28 mm  Cutter D=1/8 inch  Cutter D=3.2 mm  Cutter C=1/2 inch  Cutter C=12.7 mm  Cutter OL=50.8 mm  Shank Diameter=1/4 inch
  20. Trend Mitre fence complete alloy (CRT/MK3)
    £25.16 Excl. VAT £30.19 Incl. VAT

    Body width=142 mm  Body height=48 mm  Bar length=351 mm  Bar width=18.9 mm  Bar thickness=8.8 mm  Fits track=19 mm
  21. Trend Sub base OF1E-0F650-OF900E GB/5/I
    £27.46 Excl. VAT £32.95 Incl. VAT

    Diameter=170 mm  Thickness=8 mm  
  22. Trend VJS/CK Varijig system clamp kit (Pair)
    £22.34 Excl. VAT £26.81 Incl. VAT

    Clamp thickness max.=32mm
  23. Trend TEMP/SSD/5MM Template shelf support drill bit guide
    £24.62 Excl. VAT £29.54 Incl. VAT

    Drill diameter=5 mm
  24. Trend VJS/PCK/L Varijig ex-long pivot clamp (pair)
    £21.24 Excl. VAT £25.49 Incl. VAT

    Clamp thickness max.=51 mm
  25. Trend BSC/MIX/1000 Biscuit mixed box 0 10&20 1000pcs
    SKU: BSC/MIX/1000

    Trend BSC/MIX/1000 Biscuit mixed box 0 10&20 1000pcs

    Biscuits packs mixed sizes

    £27.25 Excl. VAT £32.70 Incl. VAT

    Size 0=47.5 mm x 15.5 mm x 4 mm  For board thickness=8 mm - 12 mm    Size 10=53 mm x 19 mm x 4 mm  For board thickness=13 mm - 18 mm    Size 20=60 mm x 23 mm x 4 mm  For board thickness=19 mm+

Back top top

1-25 of 49

Page:
  1. 1
  2. 2
Contact Us