Professional TCT Router Cutters
The Trend Professional range of router bits is designed for the most arduous applications of professional carpenters, builders, and joiners. Tungsten Carbide (TCT) router bits are manufactured using special D-Namic technology and feature specially developed micro-granular tungsten carbide tips from the world’s leading carbide manufacturer. These cutters produce a cleaner cut in hardwoods, softwoods, plywood, MDF, and chipboard.
Professional STC router bits can also be found amounts this rage, they are turned, milled and ground from a single, solid piece of tungsten carbide so they provide the greatest durability when being used under stress load conditions. These bits offer better plunge cutting characteristics than other bits and can be re-sharpened many more times than tungsten carbide tipped cutters. These STC cutters have similar applications to the TCT grade ones and can be used with many different materials. STC rasps can also be used on glass reinforced plastic (GRP).
-
£64.70 Excl. VAT £77.64 Incl. VATD=50 mm Bore=M12 Kerf=11 mm No. of Teeth=4
-
£38.64 Excl. VAT £46.37 Incl. VATD=36 mm C=6 mm R=3 mm Bore=1/4 inch
-
£56.19 Excl. VAT £67.43 Incl. VATD=50 mm Bore=M12 Kerf=4 mm No. of Teeth=4
-
£56.19 Excl. VAT £67.43 Incl. VATD=50 mm Bore=M12 Kerf=2 mm No. of Teeth=4
-
£56.71 Excl. VAT £68.05 Incl. VATD=50 mm Bore=M12 Kerf=3 mm No. of Teeth=4
-
£57.90 Excl. VAT £69.48 Incl. VATD=50 mm Bore=M12 Kerf=6 mm No. of Teeth=4
-
£57.90 Excl. VAT £69.48 Incl. VATD=50 mm Bore=M12 Kerf=5 mm No. of Teeth=4
-
£59.63 Excl. VAT £71.56 Incl. VATD=50 mm Bore=M12 Kerf=8 mm No. of Teeth=4
-
£62.98 Excl. VAT £75.58 Incl. VATD=50 mm Bore=M12 Kerf=7 mm No. of Teeth=4
-
£81.47 Excl. VAT £97.76 Incl. VATOut of stock
D=45.8 mm D2=35 mm C=2 mm C2=3 mm OL=80 mm B=28.6 mm Shank Diameter=1/2 inch
-
SKU: S3/81X1/2STCTrend S3/81X1/2STC Two flute cutter 12.7mm diameter OL 77mm shank 1/2"
Shank Diameter 1/2"
£91.96 Excl. VAT £110.35 Incl. VATD=1/2 inch D=12.7 mm C=32 mm OL=77 mm Shank Diameter=1/2 inch
-
£38.59 Excl. VAT £46.31 Incl. VATDimensions D=1/2 inch D=12.7 mm C=63 mm OL=115 mm Shank Diameter=1/2 inch Please note: This cutter does not have a TCT centre tip and is not suitable for plunging abrasive materials.
-
£42.55 Excl. VAT £51.06 Incl. VAT
-
SKU: 90/31X1/2TCTrend 90/31X1/2TC Trimming cutter 28.6 mm dia C 38.1mm shank 1/2"
Shank Diameter 1/2"
£46.55 Excl. VAT £55.86 Incl. VATD=28.6 mm C=1 1/2 inch C=38.1 mm B=28.57 mm A=90 degrees Shank Diameter=1/2 inch
-
£43.26 Excl. VAT £51.91 Incl. VATD=28 mm D2=9.5 mm C=8 mm Shank Diameter=3/8 inch
-
£51.93 Excl. VAT £62.32 Incl. VATD=35 mm D2=12.7 mm C=9.5 mm Shank Diameter=1/2 inch
-
£43.26 Excl. VAT £51.91 Incl. VATD=12 mm D2=4 mm S=10.0 mm Shank Diameter=1/4 inch
-
£43.26 Excl. VAT £51.91 Incl. VATD=28 mm D2=11.2 mm C=4 mm R=2 mm Shank Diameter=3/8 inch
-
£51.93 Excl. VAT £62.32 Incl. VATD=30 mm D2=10.5 mm C=7 mm R=3 mm A=119 degrees Shank Diameter=1/2 inch
-
£69.25 Excl. VAT £83.10 Incl. VATD=32 mm C=25 mm B=21.8 mm A=78 degrees Shank Diameter=1/2 inch
-
£48.83 Excl. VAT £58.60 Incl. VATD=24 mm C=25 mm A=75 degrees Shank Diameter=1/2 inch
-
SKU: 90/22X1/2TCTrend 90/22X1/2TC Six wing trimmer 52.3 mm diameter 6.5mm shank 1/2"
Shank Diameter 1/2"
£58.98 Excl. VAT £70.78 Incl. VATD=52.3 mm C=6.5 mm Shank Diameter=1/2 inch
-
SKU: 90/28X1/2TCTrend 90/28X1/2TC Bull nose combination cutter Dia 50mm shank 1/2"
Shank Diameter 1/2"
£64.70 Excl. VAT £77.64 Incl. VATD=50 mm C=25 mm B=12.7 mm R=19 mm Shank Diameter=1/2 inch
-
SKU: 90/26X1/4TC
Trend 90/26X1/4TC Bull nose combination cutter Dia 27mm shank 1/4"
Shank Diameter 1/4"
£53.90 Excl. VAT £64.68 Incl. VATD=27 mm C=12.5 mm B=12.7 mm R=8 mm Shank Diameter=1/4 inch
-
SKU: 90/25X1/2TC
Trend 90/25X1/2TC Bull nose combination cutter Dia 38mm shank 1/2"
Shank Diameter 1/2"
£55.64 Excl. VAT £66.77 Incl. VATD=38 mm C=19 mm B=12.7 mm R=12.7 mm Shank Diameter=1/2 inch
