Professional TCT Router Cutters
The Trend Professional range of router bits is designed for the most arduous applications of professional carpenters, builders, and joiners. Tungsten Carbide (TCT) router bits are manufactured using special D-Namic technology and feature specially developed micro-granular tungsten carbide tips from the world’s leading carbide manufacturer. These cutters produce a cleaner cut in hardwoods, softwoods, plywood, MDF, and chipboard.
Professional STC router bits can also be found amounts this rage, they are turned, milled and ground from a single, solid piece of tungsten carbide so they provide the greatest durability when being used under stress load conditions. These bits offer better plunge cutting characteristics than other bits and can be re-sharpened many more times than tungsten carbide tipped cutters. These STC cutters have similar applications to the TCT grade ones and can be used with many different materials. STC rasps can also be used on glass reinforced plastic (GRP).
-
SKU: 6/50X1/4TCTrend 6/50X1/4TC Sash bar ovolo joint cutter 10mm dia 25mm shank 1/4
Shank Diameter 1/4"
£61.90 Excl. VAT £74.28 Incl. VATD=25 mm C=20 mm R=10 mm Shank Diameter=1/4 inch
-
£68.90 Excl. VAT £82.68 Incl. VATD=2 inches D=50.8 mm C=1 inch C=25.4 mm B=12.7 mm B2=16 mm R=3/4 inch R=19.1 mm Shank Diameter=1/2 inch
-
£77.90 Excl. VAT £93.48 Incl. VATD=32 mm C=25 mm C2=45 mm R=15 mm Shank Diameter=1/2 inch
-
SKU: S3/81X1/2STCTrend S3/81X1/2STC Two flute cutter 12.7mm diameter OL 77mm shank 1/2"
Shank Diameter 1/2"
£91.96 Excl. VAT £110.35 Incl. VATD=1/2 inch D=12.7 mm C=32 mm OL=77 mm Shank Diameter=1/2 inch
-
£62.45 Excl. VAT £74.94 Incl. VATD=22 mm C=22 mm C2= 35 mm R=18 mm Shank Diameter=1/2 inch
-
£69.25 Excl. VAT £83.10 Incl. VATD=37 mm C=40 mm B=16 mm R=13.5 mm Shank Diameter=1/2 inch
-
£77.90 Excl. VAT £93.48 Incl. VATD=63.5 mm C=1 inch C=25.4 mm B=12.7 mm B2=16 mm R=1 inch R=25.4 mm Shank Diameter=1/2 inch
-
SKU: 338X1/2TCTrend 338X1/2TC Matchlining set dia 47mm
D=47 mm C=11 mm C2=6 mm B=34 mm B2=22 mm OL=76 mm A=45 degrees Shank =1/2"
£97.78 Excl. VAT £117.34 Incl. VAT
-
£59.63 Excl. VAT £71.56 Incl. VATD=1 5/8 inches D=41.3 mm C=17.5 mm B=9.5 mm B2=12.7 mm R=6.3 mm Shank Diameter=1/2 inch
-
SKU: 46/22X1/2TCTrend 46/22X1/2TC Trimming cutter 18.2 mm diameter C 50mm shank 1/2"
Shank Diameter 1/2"
£63.51 Excl. VAT £76.21 Incl. VATD=18.2 mm C=50 mm B=18.2 mm A=90 degrees Shank Diameter=1/2 inch
-
£69.25 Excl. VAT £83.10 Incl. VATD=1 1/2 inch D=38.1 mm C=1 1/4 inch C=31.7 mm R=3/4 inch R=19.1 mm Shank Diameter=1/2 inch
-
£77.90 Excl. VAT £93.48 Incl. VATD=86 mm C=12.7 mm B=12.7 mm R=40 mm Shank Diameter=1/2 inch
-
£132.86 Excl. VAT £159.43 Incl. VATD=1/2 inch D=12.7 mm C=50 mm OL=99 mm Shank Diameter=1/2 inch Please note: This cutter is especially suited for drilling.
-
£60.59 Excl. VAT £72.71 Incl. VATD=25 mm C=32 mm R=12.5 mm Shank Diameter=1/2 inch
-
SKU: 90/28X1/2TCTrend 90/28X1/2TC Bull nose combination cutter Dia 50mm shank 1/2"
Shank Diameter 1/2"
£64.70 Excl. VAT £77.64 Incl. VATD=50 mm C=25 mm B=12.7 mm R=19 mm Shank Diameter=1/2 inch
-
£69.25 Excl. VAT £83.10 Incl. VATD=40 mm C=10 mm B=32 mm E=4 mm L=41 mm Shank Diameter=1/2 inch Fire check=30 minutes
-
£81.47 Excl. VAT £97.76 Incl. VATD=44.8 mm D2=24 mm C=25.4 mm R=8 mm R2=2 mm Shank Diameter=1/2 inch
-
£60.59 Excl. VAT £72.71 Incl. VATD=1 3/4 inch D=44.5 mm C=32 mm OL=73 mm Shank Diameter=1/2 inch
-
£66.98 Excl. VAT £80.38 Incl. VATD=30 mm D2=12.7 mm C=35 mm C2=36 mm B=12.7 mm A=75 degrees Shank Diameter=1/2 inch
-
£69.26 Excl. VAT £83.11 Incl. VATD=50 mm C=6.5 mm C2=11.5 mm R=20 mm R2=12 mm Shank Diameter=1/2 inch
-
£81.47 Excl. VAT £97.76 Incl. VATD=45.8 mm D2=35 mm C=2.2 mm C2=5.0 mm OL=80 mm B=28.6 mm Shank Diameter=1/2 inch
-
SKU: 34/40TCTrend 34/40TC Slotter 10mm kerf 12mm bore dia 50mm
D=50 mm Bore=12 mm Kerf=10 mm No. of Teeth=4
£61.25 Excl. VAT £73.50 Incl. VATD=50 mm Bore=12 mm Kerf=10 mm No. of Teeth=4
-
SKU: S55/08X8MMSTCTrend S55/08X8MMSTC Aluminium spiral upcut cutter 8 mm diameter
Shank Diameter 8 mm
£67.59 Excl. VAT £81.11 Incl. VATD=8 mm C=20 mm OL=63 mm Shank Diameter=8 mm Recommended speed=12000-24000 rpm
-
£70.96 Excl. VAT £85.15 Incl. VATD=50 mm Bore=M12 Kerf=9.5 mm No. of Teeth=4
-
£84.40 Excl. VAT £101.28 Incl. VATD=69.2 mm C=16 mm B=9.5 mm B2= 12.7 mm R=44 mm Shank Diameter=1/2 inch
