WE ARE OPEN

Our other sites:

Chamfer and V Groove

Back top top

26-44 of 44

Page:
  1. 1
  2. 2
  1. Trend 46/104X1/2TC Bevel cutter Dia 30mm
    SKU: 46/104X1/2TC

    Trend 46/104X1/2TC Bevel cutter Dia 30mm

    Shank Diameter 1/2"

    £66.98 Excl. VAT £80.38 Incl. VAT

    D=30 mm  D2=12.7 mm  C=35 mm   C2=36 mm  B=12.7 mm  A=75 degrees  Shank Diameter=1/2 inch  
  2. Trend 46/103X1/2TC Bevel cutter Dia 26mm
    SKU: 46/103X1/2TC

    Trend 46/103X1/2TC Bevel cutter Dia 26mm

    Shank Diameter 1/2"

    £61.90 Excl. VAT £74.28 Incl. VAT

    D=26 mm  D2=12.7 mm  C=35 mm   C2=36 mm  B=12.7 mm  A=80 degrees  Shank Diameter=1/2 inch  
  3. Trend 46/107X1/2TC Bevel cutter Dia 42mm
    SKU: 46/107X1/2TC

    Trend 46/107X1/2TC Bevel cutter Dia 42mm

    Shank Diameter 1/2"

    £66.98 Excl. VAT £80.38 Incl. VAT

    D=42 mm  D2=12.7 mm  C=35 mm  C2=38.5 mm  B=12.7 mm  A=67.5 degrees  Shank Diameter=1/2 inch  
  4. Trend 46/34X1/2TC Bearing guided bevel cutter 25 degrees 1/2"
    £49.38 Excl. VAT £59.26 Incl. VAT

    D=41 mm  C=13 mm  C1=5 mm  C2=13 mm  B=12.7 mm  B2=19 mm  A=25 degrees  Shank Diameter=1/2 inch  
  5. Trend 46/380X1/2TC Bearing guided chamfer cutter 45 degrees Dia 76mm
    £99.48 Excl. VAT £119.38 Incl. VAT

    D1=76 mm  Cut length=25.4 mm  Overall length=90 mm  B=25.4 mm  A=45 degrees  Shank Diameter=1/2  
  6. Trend 46/361X1/2TC Guided chamfer cutter 45 degrees Dia 41.3mm
    £62.06 Excl. VAT £74.47 Incl. VAT

    D=41.3 mm  C=20 mm  C2=19 mm  B=12.7 mm  A=45 degrees  Chamfer width=14.3 mm  Chamfer width with B95A accessory=15.9 mm  Shank Diameter=1/2 inch  
  7. Trend ALU/02X1/4TC Alucobond 22.5 degree chamfer v groove x 18mm
    £44.29 Excl. VAT £53.15 Incl. VAT

    D1=18 mm  C=13 mm  Overall length=57 mm  A=22.5 degrees  Shank Diameter=1/4  
  8. Trend 11/40X1/4TC Panel mould cutter dia 12.7mm shank 1/4"
    SKU: 11/40X1/4TC

    Trend 11/40X1/4TC Panel mould cutter dia 12.7mm shank 1/4"

    Shank Diameter 1/4"

    £28.95 Excl. VAT £34.74 Incl. VAT

    D=1/2 inch  D=12.7 mm  C=12.7 mm  B=12.7 mm  A=45 degrees  Shank Diameter=1/4 inch  
  9. Trend 11/20X1/4TC Panel mould cutter dia 12.7mm shank 1/4" 60 degrees
    £32.96 Excl. VAT £39.55 Incl. VAT

    D=1/2 inch  D=12.7 mm  C=16 mm  B=12.7 mm  A=60 degrees  Shank Diameter=1/4 inch  
  10. Trend 11/5X1/4TC Chamfer V groove cutter 60 degrees shank 1/4"
    £23.88 Excl. VAT £28.66 Incl. VAT

    D=1/2 inch  D=12.7 mm  C=10.3 mm  C2=11.9 mm  A=60 degrees  Shank Diameter=1/4 inch  
  11. Trend 11/5X1/2TC Bevel cutter Dia 12.7mm
    SKU: 11/5X1/2TC

    Trend 11/5X1/2TC Bevel cutter Dia 12.7mm

    Shank Diameter 1/2"

    £23.88 Excl. VAT £28.66 Incl. VAT

    D=1/2 inch  D=12.7 mm  C=10.3 mm   C2=11.9 mm  A=60 degrees  Shank Diameter=1/2 inch  
  12. Trend 41/5X1/4TC Guided 3 flute 45 degree chamfer x 11mm cut
    £44.29 Excl. VAT £53.15 Incl. VAT

    D1=34 mm  C=11 mm  B=12.7 mm  A=45 degrees  Shank Diameter=1/4  
  13. Trend 10H/1X1/4TC Pin guided chamfer bevel cutter 45 degrees
    £36.94 Excl. VAT £44.33 Incl. VAT

    C=10 mm  C2=14 mm  P=5.5 mm  A=45 degrees  Shank Diameter=1/4 inch  
  14. Trend 46/38X1/2TC Bearing guided chamfer cutter 45 degrees Dia 50mm
    £66.98 Excl. VAT £80.38 Incl. VAT

    D=50 mm  C=19 mm  C2=26 mm  B=12.7 mm  A=45 degrees  Shank Diameter=1/2 inch  
  15. Trend 46/360X1/4TC Bearing guided chamfer cutter 45 degrees Dia 35.1mm
    £61.90 Excl. VAT £74.28 Incl. VAT

    D=35.1 mm  C=12 mm  C2=16 mm  B=12.7 mm  A=45 degrees  Shank Diameter=1/4 inch
  16. Trend 46/37X1/4TC Bearing guided chamfer cutter 45 degrees Dia 31.8mm
    £51.64 Excl. VAT £61.97 Incl. VAT

    D=31.8 mm  C=12 mm  C2=16 mm  B=9.5 mm  A=45 degrees  Shank Diameter=1/4 inch  
  17. Trend 46/37X1/2TC Bearing guided chamfer cutter 45 degrees Dia 31.8mm
    £51.64 Excl. VAT £61.97 Incl. VAT

    D=31.8 mm  C=12 mm  C2=16 mm  B=9.5 mm  A=45 degrees  Shank Diameter=1/2 inch  
  18. Trend 46/360X1/2TC Guided chamfer cutter 45 degrees Dia 35.1mm
    £61.90 Excl. VAT £74.28 Incl. VAT

    D=35.1 mm  C=12 mm  C2=16 mm  B=12.7 mm  A=45 degrees  Shank Diameter=1/2 inch  
  19. Trend ALU/01X1/4TC Alucobond 45 degree chamfer v groove x 13mm
    £36.30 Excl. VAT £43.56 Incl. VAT

    D=13 mm  C=10 mm  Overall length=57 mm  A=45 degrees  Shank Diameter=1/4 inch  

Back top top

26-44 of 44

Page:
  1. 1
  2. 2
Contact Us