SPARE PARTS
Here you will find a huge selection of different spare parts for Trend routers and other woodworking tools, including spares for jigs, drills, dust extractors, and more. Search for a specific product code in the search box above or browse this section to find the spare part you need. Other spares in this section include parts for marking and measuring equipment, router tables, router bits, and clamping systems. These parts include nuts, screws, knobs, washers, and more.
-
£13.65 Excl. VAT £16.38 Incl. VATBolt Head type=Dome Bolt thread=UNC 1/4-20 Bolt hread length=2-1/4 inch Bolt head=hex Wing nut Wing nut=UNC 1/4-20 -
£14.38 Excl. VAT £17.26 Incl. VATSize=305 x 6 mm -
£13.65 Excl. VAT £16.38 Incl. VATSize=256 x 6 mm
-
-
-
-
SKU: WP-T11/128Trend WP-T11/128 Table fine height adjuster T11
£17.71 Excl. VAT £21.25 Incl. VATSize A/F=12 mm -
SKU: WP-T11/125ATrend WP-T11/125A End cap hex for stud T11 post 11/05
£18.50 Excl. VAT £22.20 Incl. VAT -
-
-
-
SKU: WP-T4/087Trend WP-T4/087 Parallel side fence complete with rods T4
£13.63 Excl. VAT £16.36 Incl. VATRod diameter=8 mm Rod length=300 mm Rod centres=84 mm -
-
-
SKU: WP-T5E/017Trend WP-T5E/017 Switch T5, T5/euro & T5el v2
£15.26 Excl. VAT £18.31 Incl. VATVoltage=240v & 115V -
-
SKU: WP-T5E/027Trend WP-T5E/027 Switch T5E 240V
£18.35 Excl. VAT £22.02 Incl. VATOut of stock
Voltage=240v -
SKU: WP-T5EURO/023ATrend WP-T5EURO/023A Cable 2 core & 2 pin plug euro T5v2
£19.23 Excl. VAT £23.08 Incl. VAT -
-
SKU: WP-T9E/007Trend WP-T9E/007 Carbon Brush 230V T9E (1 Pair)
£18.31 Excl. VAT £21.97 Incl. VATOut of stock
-
SKU: B33CTrend B33C Bearing 32.9mm dia x 1/2 bore
£15.89 Excl. VAT £19.07 Incl. VATB=32.9 mm Bore=1/2 inches Bore=12.7 mm Thickness=9.3 mm
-
SKU: B34C
Trend B34C Bearing 33.9mm x 1/2 bore
£15.89 Excl. VAT £19.07 Incl. VATB=33.9 mm Bore=1/2 inches Bore=12.7 mm Thickness=9.3 mm
-
£19.34 Excl. VAT £23.21 Incl. VATD=24 mm Kerf=10 mm Bore=UNC1/4-20 -
£15.69 Excl. VAT £18.83 Incl. VATD=47 mm Kerf=6 mm
-
£14.26 Excl. VAT £17.11 Incl. VATOL=87 mm Spigot length incl thread=47 mm Spigot thread length=14 mm Shank Diameter=8 mm
