WE ARE OPEN

Our other sites:

17.69 GBP
TREND C074CX1/4TC ROUNDING OVER 2.0MM RADIUS X 9.5MM CUT
TREND C074CX1/4TC ROUNDING OVER 2.0MM RADIUS X 9.5MM CUT
C074CX1/4TC
Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
£17.69 Excl. VAT £21.23 Incl. VAT
Out of Stock
Specification
D=16.7 mm  C=7.7 mm  B=9.5 mm  B2=12.7 mm  R= 2mm  OL=61 mm  Shank Diameter=1/4 inch
Contact Us