75.83 GBP
Trend LOCK/JIG/B Adjustable trade lock jig

More Views

Trend LOCK/JIG/B Adjustable trade lock jig
LOCK/JIG/B
This jig has adjustable sliding inserts which allow faceplate and mortise recesses for popular size door locks to be cut with a router.
Fully-variable, for lock face plate lengths up to 250mm.
Fast and easy to set up using the engraved lines for lock size and door sizes.
Clean, fast and accurate results on doors, including hardwood doors.
Engraved for lock widths 16mm and 19mm and face plate widths 22.5mm and 25.4mm.
Measuring is required for locks of other widths.
Engraved on underside, allowing set-up for 35mm, 40mm, 44mm and 54mm door widths.
Deeper mortises can be cut with a suitable size of auger bit.
Plastic laminate body with an aluminium clamping bar, which has a clamping range of 30mm to 80mm.
Includes a pair of setting blocks for specific lock widths and to assistance with door centring.
This jig requires a 1/2-inch plunge router with an 80mm plunge, fitted with a 30mm guide bush with 10mm spigot, 12mm diameter long reach cutter, and two quick action clamps. A 1/4-inch plunge router can be used for the face plate but will not cut full depth of mortise.
Trend LOCK/JIG/B
£75.83 Excl. VAT £91.00 Incl. VAT

Availability: In stock


Specification
Door thickness min.=30 mm  Door thickness max.=80 mm  Faceplate length min. (OL)=30 mm  Faceplate length max. (OL)=250 mm    Face plate width engraved size (D)  Width=22.5 mm  Width=25.4 mm (1 inch)    Mortise width engraved size (D)  Width=16 mm (5/8 inch)  Width=19 mm (3/4 inch)
Product Includes
2 x setting block
Contact Us