JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

7 Item(s)

  1. Trend CRT/MK3L CraftPro Router Table MK3 115V
    £208.24 Excl. VAT £249.89 Incl. VAT

  2. Trend CRT/MK3 CraftPro Router Table MK3 240V
    £184.31 Excl. VAT £221.17 Incl. VAT

  3. Trend CRT/4 Hose 39mm outside diameter x 3M and adapter
    £19.42 Excl. VAT £23.30 Incl. VAT

    Length=3 metres  Hose OD=39 mm  Hose ID=32 mm  Adaptor OD=58 mm (2-1/4 inch)  Adaptor ID=35 mm (for 39 mm OD hose)
  4. Trend CRT/3 Hose adaptor 58mm to 39mm
    £9.76 Excl. VAT £11.71 Incl. VAT

    Adaptor OD=58 mm (2-1/4 inch)  Adaptor ID=35 mm (for 39 mm OD hose)
  5. Trend CRT/2 Profiling top guard
    £11.41 Excl. VAT £13.69 Incl. VAT

  6. Trend PRT/L Professional Router Table 115V
    £461.17 Excl. VAT £553.40 Incl. VAT

  7. Trend PRT Professional Router Table UK 230V
    £461.17 Excl. VAT £553.40 Incl. VAT

    Out of stock

Back top top

7 Item(s)

Contact Us