WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

12 Item(s)

  1. Trend RBTRNG18/10 Routabout Ring Set 18mm 10 Off
    £54.88 Excl. VAT £65.86 Incl. VAT

    Max. load capacity=200 kg
  2. Trend SMC/02X1/4HSS Scribe-Master cutter 4x40x100mm x 1/4 HSS
    SKU: SMC/02X1/4HSS

    Trend SMC/02X1/4HSS Scribe-Master cutter 4x40x100mm x 1/4 HSS

    Scribemaster cutter for softwood

    £41.01 Excl. VAT £49.21 Incl. VAT

    D=4 mm  C=40 mm  OL=100 mm  Shank Diameter=1/4 inch  For use on softwood and MDF*  *The abrasive nature of MDF will lead to premature tool wear.
  3. Trend SM/TSP Scribe-Master Tenon Slide Plate
    £54.70 Excl. VAT £65.64 Incl. VAT

    Max. working length=190 mm  Max. tenon length adj.=50 mm  Max. cutter dia.=22 mm
  4. Trend SMC/03X8MMHSS Scribe-Master cutter 4x40x90mm x 8mm HSS
    SKU: SMC/03X8MMHSS

    Trend SMC/03X8MMHSS Scribe-Master cutter 4x40x90mm x 8mm HSS

    Scribemaster cutter for hardwood

    £45.09 Excl. VAT £54.11 Incl. VAT

    D=4 mm  C=40 mm  OL=90 mm  Shank Diameter=8 mm  For use on hardwood
  5. Trend R/COMPASS/A Router Compass 610mm
    £54.88 Excl. VAT £65.86 Incl. VAT

    Radius min.=100 mm  Radius max.=610 mm  Guide bush hole=30.1 mm
  6. Trend TEMP/CTI/A Template cable tidy insert
    £48.23 Excl. VAT £57.88 Incl. VAT

    Size=325 x 290 x 8 mm
  7. Trend VJS/CK/L Varijig system Ex long clamp (Pair)
    £48.23 Excl. VAT £57.88 Incl. VAT

    Clamp thickness max.=51mm
  8. Trend TEMP/BH/A Template butt hinge
    £54.76 Excl. VAT £65.71 Incl. VAT

    Size= 214 mm x 135 mm x 8 mm  Door thickness min.=34 mm  Door thickness max.=44 mm  Hinge recess length=75 mm  Hinge recess length=100 mm  
  9. Trend MT/DUSTKIT MT/JIG dust kit
    £43.01 Excl. VAT £51.61 Incl. VAT

    Dust spout aperture=58 mm (2-1/4 inch)  Adaptor OD=58 mm (2-1/4 inch)  Adaptor ID=35 mm (for 39 mm OD hose)  
  10. Trend RBT/CUT/1 Routabout Cutter 18mm Floor 1/4" Shank
    £53.99 Excl. VAT £64.79 Incl. VAT

    Shank Diameter=1/4 inch  For use on 18 mm floor thickness
  11. Trend RBT/CUT/2 Routabout Cutter 18mm Floor 1/2" Shank
    £53.99 Excl. VAT £64.79 Incl. VAT

    Shank Diameter=1/2 inch  For use on 18 mm floor thickness
  12. Trend TEMP/LB/A Template letterbox
    £54.76 Excl. VAT £65.71 Incl. VAT

    Template size=326 mm x 290 mm x 8 mm  Letterbox plate sizes  220 mm x 50 mm  210 mm x 60 mm  200 mm x 60 mm

Back top top

12 Item(s)

Contact Us