Our other sites:


Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.


240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

12 Item(s)

  1. Trend H/JIG/C Hinge jig Skeleton two part in case
    £222.40 Excl. VAT £266.88 Incl. VAT

  2. Trend D/CLAMP/A Door clamp ratchet type
    £26.33 Excl. VAT £31.60 Incl. VAT

    Maximum door thickness=55 mm
  3. Trend C/CHISEL Corner chisel HSS
    £17.51 Excl. VAT £21.01 Incl. VAT

    Length = 70 mm  Width = 29 mm  Weight = 100 g
  4. Trend CASE/HJ/C Fabric carry case for H/JIG/C
    £24.70 Excl. VAT £29.64 Incl. VAT

    Out of stock

    Length outside=1325mm  Height outside=160 mm
  5. Trend CASE/HJ/A Fabric carry case for H/JIG/A
    £24.70 Excl. VAT £29.64 Incl. VAT

    Length outside=1250 mm  Height outside=160 mm
  6. Trend D/LIFT/B Door & board lifter swivel type
    £22.44 Excl. VAT £26.93 Incl. VAT

    Lifts to height=60 mm  Maximum door weight=75 kg  Size=315 mm x 80 mm x 80 mm  Weight=688 g
  7. Trend D/LIFT/A Door lifter
    £20.36 Excl. VAT £24.43 Incl. VAT

    Weight=303 g  Lifts to height=38 mm  Maximum door weight=108 kg  Size=254 mm x 44 mm x 75 mm
  8. Trend D/STAND/A Door holder stand
    £55.75 Excl. VAT £66.90 Incl. VAT

    Maximum door thickness=55 mm  Minimum door thickness=32 mm  Maximum door weight=50 kg  Weight=2.2 kg
  9. Trend TEMP/BH/A Template butt hinge
    £54.76 Excl. VAT £65.71 Incl. VAT

    Size= 214 mm x 135 mm x 8 mm  Door thickness min.=34 mm  Door thickness max.=44 mm  Hinge recess length=75 mm  Hinge recess length=100 mm  
  10. Trend HINGE/JIG Hinge recessing Jig Single Piece
    £222.40 Excl. VAT £266.88 Incl. VAT

  11. Trend H/JIG/A Hinge jig two part in case
    £222.40 Excl. VAT £266.88 Incl. VAT

    £35.31 Excl. VAT £42.37 Incl. VAT

Back top top

12 Item(s)

Contact Us