WE ARE OPEN

Our other sites:

JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

7 Item(s)

  1. Trend TEMP/TRKX1/4 Template Timber Repair kit 2
    £46.12 Excl. VAT £55.34 Incl. VAT

    Patch size=120 mm x 45 mm  Template Size=400 x 180 x 8 mm
  2. Trend TEMP/NUC/57 Template set number 57mm uppercase
    £22.13 Excl. VAT £26.56 Incl. VAT

    Size=360 x 110 x 5 mm
  3. Trend TEMP/LUC/57 Template set letters 57mm uppercase
    £44.35 Excl. VAT £53.22 Incl. VAT

    Size=396 x 110 x 5 mm
  4. Trend INLAY/KIT/A Inlay kit with 3.2mm cutter 1/4 Solid tungsten
    £24.59 Excl. VAT £29.51 Incl. VAT

    Guide bush ID=4.8 mm  Guide bush OD=7.9 mm  Collar OD=14.28 mm  Cutter D=1/8 inch  Cutter D=3.2 mm  Cutter C=1/2 inch  Cutter C=12.7 mm  Cutter OL=50.8 mm  Shank Diameter=1/4 inch
  5. Trend TEMP/CTI/A Template cable tidy insert
    £38.31 Excl. VAT £45.97 Incl. VAT

    Size=325 x 290 x 8 mm
  6. Trend TEMP/COR/A Template corner hole
    £46.12 Excl. VAT £55.34 Incl. VAT

    Size=290 x 290 x 8 mm
  7. Trend Template cabinet door hinge 35 & 26mm
    £53.49 Excl. VAT £64.19 Incl. VAT

    Size=355 mm x 320 mm x 12 mm  Hinge dia.=26 mm and 35 mm  Hole position range from top/bottom of door to centre of hinge  26 mm dia.=50 to 105mm*  35 mm dia.=50 to 190 mm*  * Hinge centre normally positioned 100 mm from top/bottom of door.  

Back top top

7 Item(s)

Contact Us