DRILLING
-
SKU: SNAP/FS/35
Trend SNAP/FS/35 Snappy forstner 35mm
Short forstner bits for drilling accurate holes
£21.73 Excl. VAT £26.08 Incl. VAT -
SKU: SNAP/FS/30
Trend SNAP/FS/30 Snappy forstner 30mm
Short forstner bits for drilling accurate holes
£21.73 Excl. VAT £26.08 Incl. VAT -
SKU: SNAP/FS/32
Trend SNAP/FS/32 Snappy forstner 32mm
Short forstner bits for drilling accurate holes
£21.73 Excl. VAT £26.08 Incl. VAT -
SKU: SNAP/ASA/2
Trend SNAP/ASA/2 Snappy Angle Screwdriver (mark 2)
Screwdriver attachment for access to tight corners
£47.80 Excl. VAT £57.36 Incl. VATOut of stock
-
-
SKU: SNAP/PC/127T
Trend SNAP/PC/127T Snappy tube plug cutter 12.7mm
£20.89 Excl. VAT £25.07 Incl. VAT -
SKU: SNAP/HD1/SET
Trend SNAP/HD1/SET Snappy hex drill bit set 16pc
£24.56 Excl. VAT £29.47 Incl. VATShank Diameter=1/4 inch hex Size=123mm x 170 mm -
£28.13 Excl. VAT £33.76 Incl. VATShank Diameter=1/4 inch hex
-
SKU: SNAP/D/SET/2
Trend SNAP/D/SET/2 Snappy 7 Piece metric drill set 1-7mm
7 Piece Drill Set - metric
£28.13 Excl. VAT £33.76 Incl. VATShank Diameter=1/4 inch hex -
£24.76 Excl. VAT £29.71 Incl. VAT
-
SKU: SNAP/MB/35DS
TREND SNAP/MB/35DS SNAPPY 35MM MACHINE BIT W/DEPTH STOP
£25.88 Excl. VAT £31.06 Incl. VAT -
£26.53 Excl. VAT £31.84 Incl. VAT
-
£25.95 Excl. VAT £31.14 Incl. VAT
-
£25.35 Excl. VAT £30.42 Incl. VAT
-
£27.73 Excl. VAT £33.28 Incl. VAT
-
£32.58 Excl. VAT £39.10 Incl. VATShank Diameter=1/4 inch hex D=2 mm (5/64") D=2.75 mm (7/64") D=3.5 mm (9/64") Screw size=No.6 Screw size=No.8 Screw size=No.10
-
£22.44 Excl. VAT £26.93 Incl. VAT
-
£22.44 Excl. VAT £26.93 Incl. VAT
-
£30.06 Excl. VAT £36.07 Incl. VAT
-
SKU: GRAB/SE2/SET
TREND GRAB/SE2/SET GRABIT SCREW EXTRACTOR SET - 4 PIECE SET FOR REMOVING DAMAGED SCREWS AND BOLTS FROM 4MM TO 8MM DIAMETER
£30.60 Excl. VAT £36.72 Incl. VAT -
-
-
-
SKU: SNAP/PC/A
Trend SNAP/PC/A Snappy 4 Piece Set Countersink Set
£37.98 Excl. VAT £45.58 Incl. VATShank Diameter=1/4 inch hex Screw size=No.8 Screw size=No.10 -
SKU: SNAP/TH2/SET
Trend SNAP/TH2/SET Snappy tool holder 60 piece bit set
£102.98 Excl. VAT £123.58 Incl. VATSize=300 mm x 165 mm Tools up to 155 mm=20 Tools up to 80 mm=15 Screwdriver insert bits=23 Quick chucks=2 Belt strap=2 -
SKU: 421/35X1/4TC
Trend 421/35X1/4TC Hinge sinking 35mm diameter Shank Dia 1/4" OL 65mm
2 Wings, no Scribers & Centre Point
£47.65 Excl. VAT £57.18 Incl. VAT -
SKU: 49/71X10MMHSS
Trend 49/71X10MMHSS Rose countersink 20mm countersink
£34.91 Excl. VAT £41.89 Incl. VAT -
SKU: 49/70X1/4HSS
Trend 49/70X1/4HSS Rose countersink 12.5mm countersink
£24.66 Excl. VAT £29.59 Incl. VAT -
SKU: 104/35X3/8TC
Trend 104/35X3/8TC Hinge sinking 35mm diameter Shank Dia 3/8"
2 Wings, 2 Scribers & Centre Point
£55.66 Excl. VAT £66.79 Incl. VAT -
£30.26 Excl. VAT £36.31 Incl. VAT
-
£27.08 Excl. VAT £32.50 Incl. VAT
-
£29.48 Excl. VAT £35.38 Incl. VAT
-
£30.26 Excl. VAT £36.31 Incl. VAT
-
£30.26 Excl. VAT £36.31 Incl. VAT
-
SKU: CB38-532TC
Trend CB38-532TC 5/32 drill diameter x 3/8 counterbore TCT
£37.34 Excl. VAT £44.81 Incl. VAT -
SKU: CB38-316TC
Trend CB38-316TC 3/16 drill diameter x 3/8 counterbore TCT
£37.34 Excl. VAT £44.81 Incl. VAT -
SKU: CB12-14TC
Trend CB12-14TC 1/4 drill diameter x 1/2 counterbore TCT
£40.53 Excl. VAT £48.64 Incl. VAT -
SKU: CB58-14TC
Trend CB58-14TC 1/4 drill diameter x 5/8 counterbore TCT
£41.30 Excl. VAT £49.56 Incl. VAT -
SKU: CB34-14TC
Trend CB34-14TC 1/4 drill diameter x 3/4 counterbore TCT
£42.95 Excl. VAT £51.54 Incl. VAT -
SKU: CB12-316TC
Trend CB12-316TC 3/16 drill diameter x 1/2 counterbore TCT
£39.01 Excl. VAT £46.81 Incl. VAT -
£27.08 Excl. VAT £32.50 Incl. VAT
-
£60.34 Excl. VAT £72.41 Incl. VAT
-
SKU: 1306/78WS
Trend 1306/78WS Saw forstner 7/8 inch diameter (long series)
£27.08 Excl. VAT £32.50 Incl. VAT -
£37.34 Excl. VAT £44.81 Incl. VAT
-
£35.84 Excl. VAT £43.01 Incl. VAT
-
SKU: 1306/114WS
Trend 1306/114WS Saw forstner 1 1/4 inch diameter (long series)
£39.01 Excl. VAT £46.81 Incl. VAT -
£29.48 Excl. VAT £35.38 Incl. VAT
Out of stock
-
£29.04 Excl. VAT £34.85 Incl. VATOverall length=94 mm Shank Diameter=8mm Shank Length=24 mm Plug size=3/8 inch Plug size=9.5 mm
-
SKU: PH/JIG/M
Trend PH/JIG/M Pocket hole jig mini
£47.29 Excl. VAT £56.75 Incl. VATA material thickness min.=16 mm Material thickness max.=38 mm Material width min.=38 mm Hole pitch=18 mm-54 mm Drill diameter=9.5 mm Square drive bit size=No.2 Screw sizes=No.7 x 30 mm -
SKU: PH/JIG
Trend PH/JIG Pocket hole Jig
£84.46 Excl. VAT £101.35 Incl. VATA material thickness min.=16 mm Material thickness max.=38 mm Material width min.=38 mm Hole pitch=29 mm-63 mm Drill diameter=9.5 mm Square drive bit size=No.2 Screw sizes=No.7 x 30 mm -
£83.96 Excl. VAT £100.75 Incl. VAT
-
£65.01 Excl. VAT £78.01 Incl. VAT
-
£69.55 Excl. VAT £83.46 Incl. VAT
-
£80.16 Excl. VAT £96.19 Incl. VAT
-
SKU: 2214/158WS
Trend 2214/158WS Plug maker match 1 5/8 inch diameter
Clean cut plug makers for timber
£98.21 Excl. VAT £117.85 Incl. VAT -
SKU: 2214/178WS
Trend 2214/178WS Plug maker match 1 7/8 inch diameter
Clean cut plug makers for timber
£110.59 Excl. VAT £132.71 Incl. VAT -
£65.18 Excl. VAT £78.22 Incl. VAT
-
SKU: SNAP/CSDS/4MMT
Trend SNAP/CSDS/4MMT Snappy TC 4mm drill countersink (depth stop)
£22.00 Excl. VAT £26.40 Incl. VATD=10 mm D2=4 mm Shank Diameter=1/4 inch hex -
SKU: SNAP/CSDS/5MMT
Trend SNAP/CSDS/5MMT Snappy TC 5mm drill countersink (depth stop)
£28.63 Excl. VAT £34.36 Incl. VATD=1/2 inch D=12.7 mm D2=5 mm Shank Diameter=1/4 inch hex -
SKU: SNAP/CS/5MMTC
Trend SNAP/CS/5MMTC Snappy Countersink 5mm x 12.7mm TCT
Tungsten Carbide countersinks with HSS drills
£20.89 Excl. VAT £25.07 Incl. VAT -
SKU: SNAP/CS/6MMTC
Trend SNAP/CS/6MMTC Snappy Countersink 6mm x 12.7mm TCT
Tungsten Carbide countersinks with HSS drills
£20.89 Excl. VAT £25.07 Incl. VAT -
SKU: SNAP/DBG/SET
Trend SNAP/DBG/SET Snappy drill bit guide 4 piece set
£43.84 Excl. VAT £52.61 Incl. VATShank Diameter=1/4 inch hex -
SKU: SNAP/SS/5MM
Trend SNAP/SS/5MM Snappy shelf support drill bit guide 5mm
£30.86 Excl. VAT £37.03 Incl. VAT -
SKU: SNAP/DBG/12
Trend SNAP/DBG/12 Snappy centring guide 4.36mm drill
£23.76 Excl. VAT £28.51 Incl. VAT -
SKU: SNAP/CSDS/8TC
Trend SNAP/CSDS/8TC Snappy TC No 8 drill countersink (depth stop)
TC drill countersink with rotating stop
£22.54 Excl. VAT £27.05 Incl. VATD=3/8 inch D=9.5 mm D2=7/64 inch D2=2.8 mm Shank Diameter=1/4 inch hex Screw size Softwood=No.8 Hardwood=No.6 -
SKU: SNAP/CSDS/10TC
Trend SNAP/CSDS/10TC Snappy TC No 10 drill countersink (depth stop)
TC drill countersink with rotating stop
£22.54 Excl. VAT £27.05 Incl. VATD=3/8 inch D=9.5 mm D2=1/8 inch D2=3.2 mm Shank Diameter=1/4 inch hex Screw size Softwood=No.10 Hardwood=No.8 -
-
-
SKU: 1004/20TC
Trend 1004/20TC Lip and spur two wing bit 20mm diameter
£48.56 Excl. VAT £58.27 Incl. VAT -
SKU: 1004/25TC
Trend 1004/25TC Lip and spur two wing bit 25mm diameter
£49.31 Excl. VAT £59.17 Incl. VAT -
SKU: 1004/35TC
Trend 1004/35TC Lip and spur two wing bit 35mm diameter
£53.25 Excl. VAT £63.90 Incl. VAT -
SKU: 1004/40TC
Trend 1004/40TC Lip and spur two wing bit 40mm diameter
£60.34 Excl. VAT £72.41 Incl. VAT -
SKU: 1004/38TC
Trend 1004/38TC Lip and spur two wing bit 38mm diameter
£60.34 Excl. VAT £72.41 Incl. VAT -
SKU: 104/35X1/4TC
Trend 104/35X1/4TC Hinge sinking 35mm diameter Shank Dia 1/4"
2 Wings, 2 Scribers & Centre Point
£57.15 Excl. VAT £68.58 Incl. VAT -
£27.81 Excl. VAT £33.37 Incl. VAT
-
SKU: SNAP/CB/3TC
Trend SNAP/CB/3TC Snappy TC Counterbore 4.75mm x 12.7mm
£20.08 Excl. VAT £24.10 Incl. VAT -
SKU: SNAP/CSDS/12TC
Trend SNAP/CSDS/12TC Snappy TC No 12 drill countersink (depth stop)
TC drill countersink with rotating stop
£22.54 Excl. VAT £27.05 Incl. VATD=1/2 inch D=12.7 mm D2=9/64 inch D2=3.6 mm Shank Diameter=1/4 inch hex Screw size Softwood=No.12 Hardwood=No10 -
£29.54 Excl. VAT £35.45 Incl. VATShank Diameter=1/4 inch hex
-
SKU: SNAP/CSTC/SET
Trend SNAP/CSTC/SET Snappy 5 piece TCT Countersink Set
5 piece TCT drill countersink set
£61.71 Excl. VAT £74.05 Incl. VATShank Diameter=1/4 inch hex -
SKU: SNAP/CB/4TC
Trend SNAP/CB/4TC Snappy TC Counterbore 6.35mm x 12.7mm
£20.89 Excl. VAT £25.07 Incl. VAT -
SKU: SNAP/CB/5TC
Trend SNAP/CB/5TC Snappy TC Counterbore 6.35mm x 15.9mm
£22.25 Excl. VAT £26.70 Incl. VAT -
SKU: 421/35X3/8TC
Trend 421/35X3/8TC Hinge sinking 35mm diameter Shank Dia 3/8" OL 65mm
2 Wings, no Scribers & Centre Point
£47.65 Excl. VAT £57.18 Incl. VAT