JIGS, TABLES & ACCESSORIES
Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.
IMPORTANT SAFETY NOTICE for 2018
240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK
Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911 www.trend-uk.com
-
SKU: CLT/SLV/63127
Trend CLT/SLV/63127 Collet sleeve 6.35mm to 12.7mm
£13.26 Excl. VAT £15.91 Incl. VAT -
SKU: CLT/SLV/3263
Trend CLT/SLV/3263 Collet sleeve 3.2mm to 6.35mm
£19.36 Excl. VAT £23.23 Incl. VAT -
-
-
-
-
SKU: 2608570048.00
Trend 2608570048 Collet new type Bosch POF600 1/4 inch
£12.69 Excl. VAT £15.23 Incl. VATOut of stock
-
-
SKU: 2608570108.00
Trend 2608570108 Collet set Bosch GOF 1300 1/2 inch
£40.20 Excl. VAT £48.24 Incl. VATOut of stock
-
SKU: 2608570101.00
Trend 2608570101 Collet set Bosch GOF 900 1/4 inch
£33.86 Excl. VAT £40.63 Incl. VATOut of stock
-
-
-
SKU: CLT/SLV/95127
Trend CLT/SLV/95127 Collet sleeve 9.5mm to 12.7mm
£13.26 Excl. VAT £15.91 Incl. VAT -
-
-
-
SKU: CLT/SLV/10127
Trend CLT/SLV/10127 Collet sleeve 10mm to 12.7mm
£13.26 Excl. VAT £15.91 Incl. VAT -
-
-
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
-
-
-
-
-
SKU: TM/IP/B/10
Trend TM/IP/B/10 Template material insert brown for CNC/MINI/1
£16.61 Excl. VAT £19.93 Incl. VATSize approx.=186 x 135 mm x 2 mm -
SKU: MAG/PACK/1
Trend MAG/PACK/1 Magnet pack 15mm x3mm pack of Four
£10.89 Excl. VAT £13.07 Incl. VATSize=15 mm x 3 mm Gauss measurement=3200 -
SKU: ROD/8X500
Trend ROD/8X500 Guide rods 8mm x500mm (Pair)
£24.70 Excl. VAT £29.64 Incl. VATLength - 500 mm Diameter - 8 mm -
SKU: ROD/8X300
Trend ROD/8X300 Guide rods 8mm x300mm (Pair)
£15.46 Excl. VAT £18.55 Incl. VATLength - 300 mm Diameter - 8 mm -
-
-
SKU: HK/T/03
Trend HK/T/03 T handle hex key 3mm x 120mm
£3.99 Excl. VAT £4.79 Incl. VATSize=3 mm x 120 mm -
SKU: HK/T/04
Trend HK/T/04 T handle hex key 4mm x 130mm
£3.99 Excl. VAT £4.79 Incl. VATOut of stock
Size=4 mm x 150 mm -
SKU: INS/P6/50
Trend INS/P6/50 Insert plastics M6 (50)
£25.76 Excl. VAT £30.91 Incl. VATThread=M6 Hole size=8 mm Length=12.6 mm Lip dia=9.5 mm Body di=8.2 mm -
SKU: INS/P6/10
Trend INS/P6/10 Insert plastics M6 (10)
£6.18 Excl. VAT £7.42 Incl. VATThread=M6 Hole size=8 mm Length=12.6 mm Lip dia=9.5 mm Body di=8.2 mm -
SKU: INS/W8/50
Trend INS/W8/50 Insert for wood M8 50
£27.05 Excl. VAT £32.46 Incl. VATThread=M8 Hole size=11 mm -
SKU: INS/W8/10
Trend INS/W8/10 Insert for wood M8 10
£7.80 Excl. VAT £9.36 Incl. VATThread=M8 Hole size=11 mm -
SKU: INS/W6/50
Trend INS/W6/50 Insert for wood M6 50
£18.53 Excl. VAT £22.24 Incl. VATThread=M6 Hole size=9 mm -
SKU: INS/W6/10
Trend INS/W6/10 Insert for wood M6 10
£5.44 Excl. VAT £6.53 Incl. VATThread=M6 Hole size=9 mm -
SKU: ROD/10X500
Trend ROD/10X500 Guide rods 10mm x 500mm (Pair)
£31.76 Excl. VAT £38.11 Incl. VATLength=500 mm Diameter=10 mm -
SKU: ROD/10X360
Trend ROD/10X360 Guide rods 10mm x 360mm (Pair)
£23.23 Excl. VAT £27.88 Incl. VATLength=360 mm Diameter=10 mm -
-
-
SKU: SPAN/15
Trend SPAN/15 Spanner 15mm A/F forged
£6.39 Excl. VAT £7.67 Incl. VATOut of stock
15 mm A/F -
SKU: CASE/T10
Trend CASE/T10 Carry case T10 router
£53.74 Excl. VAT £64.49 Incl. VATSize=390 mm x 295 mm x 240 mm -
SKU: AQ21/W/25
Trend AQ21/W/25 Aqua 21 style white 25M
£74.10 Excl. VAT £88.92 Incl. VATOut of stock
-
-
-
-
-
-
SKU: RTI/PLATE
Trend RTI/PLATE Router table insert plate
£58.05 Excl. VAT £69.66 Incl. VATPlate size=306 mm x 229 mm x 9.5 mm. Max router weight=8 kg Max router base dia=200 mm -
SKU: MITRE/1
Trend MITRE/1 Mitre fence complete alloy
£35.93 Excl. VAT £43.12 Incl. VATBody width=140 mm Body height=48 mm Bar length=300 mm Bar width= 17 mm -
SKU: PRESSURE/1
Trend PRESSURE/1 Finger pressure 193X82X12.7mm
£10.89 Excl. VAT £13.07 Incl. VATLength=193 mm Thickness=12 mm Depth=81 mm -
SKU: NVRS/2/115V
Trend NVRS/2/115V No volt release switch 115V
£78.91 Excl. VAT £94.69 Incl. VATVoltage=115v Plug=16amp Max. load=12amp -
SKU: NVRS/2/240V
Trend NVRS/2/240V No volt release switch 240V
£70.00 Excl. VAT £84.00 Incl. VATVoltage=240v Plug=13amp Max. load=12amp -
SKU: NVRS/2/230V/E
Trend NVRS/2/230V/E No volt release switch 230V Euro
£66.65 Excl. VAT £79.98 Incl. VATVoltage=230v Plug=13amp Max. load=12amp -
SKU: PUSHSTICK/1
Trend PUSHSTICK/1 Pushstick plastic 1 off 420mm OL
£7.49 Excl. VAT £8.99 Incl. VATOverall length=420 mm -
-
SKU: UNI/PIN/2
Trend UNI/PIN/2 Unibase line up pin 8mm /12mm
£2.79 Excl. VAT £3.35 Incl. VATTo suit 12 mm & 8 mm collets -
SKU: UNIBASE
Trend UNIBASE Universal Sub-base with pins and bush
£22.80 Excl. VAT £27.36 Incl. VATDiameter=170 mm Thickness=8 mm -
SKU: UNI/PIN/1
Trend UNI/PIN/1 Unibase line up pin 1/4/1/2
£2.79 Excl. VAT £3.35 Incl. VATTo suit 1/4 inch & 1/2 inch collets -
£5.44 Excl. VAT £6.53 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.89 Excl. VAT £13.07 Incl. VAT
-
£17.78 Excl. VAT £21.34 Incl. VAT
-
£13.75 Excl. VAT £16.50 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£13.26 Excl. VAT £15.91 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£17.78 Excl. VAT £21.34 Incl. VAT
-
£17.78 Excl. VAT £21.34 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£17.30 Excl. VAT £20.76 Incl. VAT
-
£7.80 Excl. VAT £9.36 Incl. VAT
-
£7.80 Excl. VAT £9.36 Incl. VAT
-
SKU: GB/PLATE
Trend GB/PLATE Sub base with bush and pins
£35.71 Excl. VAT £42.85 Incl. VATLength=290 mm Width=197 mm Thickness=8 mm -
£37.05 Excl. VAT £44.46 Incl. VATDiameter=170 mm Thickness=8 mm
-
£37.05 Excl. VAT £44.46 Incl. VATDiameter=170 mm Thickness=8 mm
-
SKU: GB/5/J
Trend GB/5/J Sub base for Makita 3612C
£37.05 Excl. VAT £44.46 Incl. VATDiameter=170 mm Thickness=8 mm -
SKU: GB/5
Trend GB/5 Sub base with bush and 2 pins
£32.49 Excl. VAT £38.99 Incl. VATDiameter=170 mm Thickness=8 mm -
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT
-
£10.16 Excl. VAT £12.19 Incl. VAT