JIGS, TABLES & ACCESSORIES

Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.

IMPORTANT SAFETY NOTICE for 2018

240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

51-75 of 491

  1. Trend DC400/10 DC400 lapped tail pin stops adjustable
    £15.39 Excl. VAT £18.47 Incl. VAT

    Out of stock

  2. Trend DG/JIG Draining groove Jig
    £102.18 Excl. VAT £122.62 Incl. VAT

    Fall=0.5 degree  Groove pitch=50.0 mm  Groove length=455 mm  Slat width=19.8 mm  Length=625 mm  Height=585 mm  Width=12 mm  Weight=4.3kg
  3. Trend ELLIPSEJ/A Ellipse jig type A
    £141.52 Excl. VAT £169.82 Incl. VAT

  4. Trend ME/JIG Mini Ellipse Jig set
    £98.97 Excl. VAT £118.76 Incl. VAT

  5. Trend ELLIPSEJ/1 Extension bar 500mm x 12.7mm
    £24.34 Excl. VAT £29.21 Incl. VAT

    500 mm x 12.7 mm
  6. Trend H/JIG/C Hinge jig Skeleton two part in case
    £187.66 Excl. VAT £225.19 Incl. VAT

  7. Trend H/JIG/A Hinge jig two part in case
    £187.66 Excl. VAT £225.19 Incl. VAT

  8. Trend HINGE/JIG Hinge recessing Jig Single Piece
    £184.68 Excl. VAT £221.62 Incl. VAT

  9. Trend H/JIG/B Hinge jig B two part phenolic
    £163.33 Excl. VAT £196.00 Incl. VAT

  10. Trend TEMP/BH/A Template butt hinge
    £36.15 Excl. VAT £43.38 Incl. VAT

    Size= 214 mm x 135 mm x 8 mm  Door thickness min.=34 mm  Door thickness max.=44 mm  Hinge recess length=75 mm  Hinge recess length=100 mm  
  11. Trend BUSH/600 Bush for COMBI600 alloy 20mm 1 off
    £3.28 Excl. VAT £3.94 Incl. VAT

    Diameter= 20 mm  Overall length=37 mm  Pin length=9 mm  Pin diameter=10 mm  Min. jig thickness=10 mm  Suits jig=COMBI600, TT/KWJ600
  12. Trend MITRE/1 Mitre fence complete alloy
    £23.73 Excl. VAT £28.48 Incl. VAT

    Body width=140 mm  Body height=48 mm  Bar length=300 mm  Bar width= 17 mm
  13. Trend SPAN/17 Spanner 17mm A/F forged
    £5.14 Excl. VAT £6.17 Incl. VAT

    17 mm A/F
  14. Trend SPAN/19 Spanner 19mm A/F forged
    £4.93 Excl. VAT £5.92 Incl. VAT

    19 mm A/F
  15. Trend SPAN/13 Spanner 13mm A/F forged
    £4.62 Excl. VAT £5.54 Incl. VAT

    13 mm A/F
  16. Trend SPAN/15 Spanner 15mm A/F forged
    £4.31 Excl. VAT £5.17 Incl. VAT

    15 mm A/F
  17. Trend SPAN/12 Spanner 12mm A/F forged
    £3.80 Excl. VAT £4.56 Incl. VAT

    12 mm A/F
  18. Trend CST/635/PK1 Cutter storage tray 1/4 inch 4 pack
    £9.76 Excl. VAT £11.71 Incl. VAT

    Length=108 mm  Width=79 mm  Height=20 mm
  19. Trend CST/127/PK1 Cutter storage tray 1/2 inch 4 pack
    £9.76 Excl. VAT £11.71 Incl. VAT

    Length=108 mm  Width=79 mm  Height=20 mm
  20. Trend CASE/T10 Carry case T10 router
    £36.15 Excl. VAT £43.38 Incl. VAT

    Size=390 mm x 295 mm x 240 mm
  21. Trend CASE/T4 Carry case for T4 router
    £12.24 Excl. VAT £14.69 Incl. VAT

    Size=415 mm x 290 mm x 140 mm
  22. Trend CASE/T20 Carry case for T20 biscuit jointer
    £25.38 Excl. VAT £30.46 Incl. VAT

  23. Trend CASE/18 Plastic case deal Hire 640H and foam
    £15.11 Excl. VAT £18.13 Incl. VAT

  24. Trend AQ109/W/500 Aqua 109 & P11 style white 500M
    £792.62 Excl. VAT £951.14 Incl. VAT

    Out of stock

    Colour=White  Length=500m (2x250m)  Seal size excl barb=11mmx6.8mm
  25. Trend AQ21/B/250 Aqua 21 style brown 250M
    £421.69 Excl. VAT £506.03 Incl. VAT

    Out of stock

    Colour=Brown  Length=250m  Seal size excl barb=11.5mmx9.8mm

Back top top

51-75 of 491

Contact Us