JIGS, TABLES & ACCESSORIES
Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.
IMPORTANT SAFETY NOTICE for 2018
240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK
Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911 www.trend-uk.com
-
SKU: INLAY/KIT/A
Trend INLAY/KIT/A Inlay kit with 3.2mm cutter 1/4 Solid tungsten
£30.96 Excl. VAT £37.15 Incl. VATGuide bush ID=4.8 mm Guide bush OD=7.9 mm Collar OD=14.28 mm Cutter D=1/8 inch Cutter D=3.2 mm Cutter C=1/2 inch Cutter C=12.7 mm Cutter OL=50.8 mm Shank Diameter=1/4 inch -
SKU: TEMP/LUC/57
Trend TEMP/LUC/57 Template set letters 57mm uppercase
£55.83 Excl. VAT £67.00 Incl. VATSize=396 x 110 x 5 mm -
SKU: TEMP/NUC/57
Trend TEMP/NUC/57 Template set number 57mm uppercase
£27.86 Excl. VAT £33.43 Incl. VATSize=360 x 110 x 5 mm -
SKU: TEMP/LN57X8MM
Trend TEMP/LN57X8MM Letter number cutter/Bush pack1
£19.59 Excl. VAT £23.51 Incl. VAT -
SKU: TEMP/LN57X1/4
Trend TEMP/LN57X1/4 Letter number cutter/Bush pack2
£19.59 Excl. VAT £23.51 Incl. VAT -
SKU: TEMP/PD/R/G
Trend TEMP/PD/R/G Template Panel Door Set Rad 400mm
£19.01 Excl. VAT £22.81 Incl. VAT -
SKU: TEMP/SS/A
Trend TEMP/SS/A Template shelf support 32mm Centre
£58.05 Excl. VAT £69.66 Incl. VATSize 500 mm x 130 mm x 8 mm -
SKU: TEMP/SSD/5MM
Trend TEMP/SSD/5MM Template shelf support drill bit guide
£33.24 Excl. VAT £39.89 Incl. VATDrill diameter=5 mm -
SKU: VJS/G/100
Trend VJS/G/100 Varijig system straight guide 2.54 metre
£78.40 Excl. VAT £94.08 Incl. VAT -
SKU: MITRE/3
Trend Mitre fence complete alloy (CRT/MK3)
£35.93 Excl. VAT £43.12 Incl. VATBody width=142 mm Body height=48 mm Bar length=351 mm Bar width=18.9 mm Bar thickness=8.8 mm Fits track=19 mm -
SKU: RT/FENCE/A
Trend Router table back fence
£77.95 Excl. VAT £93.54 Incl. VATBack fence height=68 mm Back fence length=595 mm Dust spout aperture=57 mm Edge planing up to=1.4 & 2.4 mm Requires Table top slot width=8.5 mm Table top slot length=100 mm Table slot centres=408 mm -
SKU: GB/5/I
Trend Sub base OF1E-0F650-OF900E GB/5/I
£37.05 Excl. VAT £44.46 Incl. VATDiameter=170 mm Thickness=8 mm -
£15.28 Excl. VAT £18.34 Incl. VATOverall length=100 mm Diameter=12 mm
-
£18.28 Excl. VAT £21.94 Incl. VATOverall length=200 mm Diameter=12 mm
-
£24.16 Excl. VAT £28.99 Incl. VATOverall length=400 mm Diameter=12 mm
-
SKU: TEMP/CDH/A
Trend Template cabinet door hinge 35 & 26mm
£67.34 Excl. VAT £80.81 Incl. VATSize=355 mm x 320 mm x 12 mm Hinge dia.=26 mm and 35 mm Hole position range from top/bottom of door to centre of hinge 26 mm dia.=50 to 105mm* 35 mm dia.=50 to 190 mm* * Hinge centre normally positioned 100 mm from top/bottom of door. -
-
SKU: VARIJIG
Trend VARIJIG Varijig system adjustable frame
£82.05 Excl. VAT £98.46 Incl. VATExtrusion width=54mm Extrusion height=15.8mm -
SKU: STAIR/A
Trend STAIR/A Stair Jig A complete Closed riser
£177.57 Excl. VAT £213.08 Incl. VATTread Thickness=22-32 mm Slider Diameter=30 mm Nosing Adjustment=16-19 mm Length=858 mm Height=485 mm Width=9.5 mm Weight=6.17kg -
SKU: STAIR/B
Trend STAIR/B Stair Jig B complete Open riser
£177.57 Excl. VAT £213.08 Incl. VATThread thickness=32 mm Riser thickness=16 mm Guide bush diameter=24 mm Length=585 mm Height=485 mm Width=9.5 mm Weight=6.3kg -
SKU: VJS/PCK/L
Trend VJS/PCK/L Varijig ex-long pivot clamp (pair)
£30.31 Excl. VAT £36.37 Incl. VATClamp thickness max.=51 mm -
SKU: VJS/CK/L
Trend VJS/CK/L Varijig system Ex long clamp (Pair)
£48.23 Excl. VAT £57.88 Incl. VATClamp thickness max.=51mm -
SKU: VJS/CK
Trend VJS/CK Varijig system clamp kit (Pair)
£31.90 Excl. VAT £38.28 Incl. VATClamp thickness max.=32mm -
-