Our other sites:


Here you can browse our extensive range of routing accessories, router tables and jigs for routing. A jig is a specialist template that holds a workpiece and guides a power tool, the jigs here are designed to be used with woodworking routers. Jigs can save you a lot of time and ensure great accuracy each time, reducing the chance of mistakes and wasting material. Some jigs for routers require complex marking out of the workpiece, set up of the template, and often the purchase of specific cutters and guide bushes, and may be difficult for beginners to use. A router table is a special type of table where an appropriate hand-held router can be fixed, upside down, to the underside of the table top. Router tables allow you to use your router in ways which would be difficult or impossible if you were holding the router while you worked. A Router table will increase the versatility of your woodworking router. Accessories for routers include replacement collets, guide bushes and sub-bases, wooden biscuits and dowels for jointing wood, and various other accessories for router tables or jig making.


240V (UK plug only) NO VOLT RELEASE SWITCH USED ON CRT/MK3 & WRT ROUTER TABLES may have a defect and could cause an ELECTRIC SHOCK

Products with a date code of 2016 or 2017 may be affected, if your product has these date code STOP USING YOUR SWITCH IMMEDIATELY AND DISCONNECT IT FROM THE MAINS. You should contact Trend directly to arrange for your switch to be tested. Trend Customer Service: 01923 249911  www.trend-uk.com

Back top top

51-75 of 113

  1. Trend VJS/TG/JIG Varijig Tenon & Grooving Jig
    £115.62 Excl. VAT £138.74 Incl. VAT

  2. Trend VJS/G/100 Varijig system straight guide 2.54 metre
    £78.40 Excl. VAT £94.08 Incl. VAT

  3. Trend Hot rod 100mm Stainless Steel one off
    SKU: HR/100

    Trend Hot rod 100mm Stainless Steel one off

    Stainless Steel hot rod

    £15.28 Excl. VAT £18.34 Incl. VAT

    Overall length=100 mm  Diameter=12 mm  
  4. Trend Hot rod 200mm Stainless Steel one off
    SKU: HR/200

    Trend Hot rod 200mm Stainless Steel one off

    Stainless Steel hot rod

    £18.28 Excl. VAT £21.94 Incl. VAT

    Overall length=200 mm  Diameter=12 mm  
  5. Trend Hot rod 400mm Stainless Steel one off
    SKU: HR/400

    Trend Hot rod 400mm Stainless Steel one off

    Stainless Steel hot rod

    £24.16 Excl. VAT £28.99 Incl. VAT

    Overall length=400 mm  Diameter=12 mm  
    £7.49 Excl. VAT £8.99 Incl. VAT

  7. Trend RBTRNG22/10 Routabout Ring Set 22mm 10 Off
    £64.85 Excl. VAT £77.82 Incl. VAT

    Max. load capacity=200 kg
  8. Trend AR/JIG Aperture Radius Jig
    £100.58 Excl. VAT £120.70 Incl. VAT

  9. Trend DG/JIG Draining groove Jig
    £125.00 Excl. VAT £150.00 Incl. VAT

    Fall=0.5 degree  Groove pitch=50.0 mm  Groove length=455 mm  Slat width=19.8 mm  Length=625 mm  Height=585 mm  Width=12 mm  Weight=4.3kg
  10. Trend ELLIPSEJ/A Ellipse jig type A
    £213.31 Excl. VAT £255.97 Incl. VAT

  11. Trend ELLIPSEJ/1 Extension bar 500mm x 12.7mm
    £36.86 Excl. VAT £44.23 Incl. VAT

    500 mm x 12.7 mm
  12. Trend H/JIG/C Hinge jig Skeleton two part in case
    £222.40 Excl. VAT £266.88 Incl. VAT

  13. Trend H/JIG/A Hinge jig two part in case
    £222.40 Excl. VAT £266.88 Incl. VAT

  14. Trend HINGE/JIG Hinge recessing Jig Single Piece
    £222.40 Excl. VAT £266.88 Incl. VAT

  15. Trend TEMP/BH/A Template butt hinge
    £54.76 Excl. VAT £65.71 Incl. VAT

    Size= 214 mm x 135 mm x 8 mm  Door thickness min.=34 mm  Door thickness max.=44 mm  Hinge recess length=75 mm  Hinge recess length=100 mm  
  16. Trend D/STAND/A Door holder stand
    £55.75 Excl. VAT £66.90 Incl. VAT

    Maximum door thickness=55 mm  Minimum door thickness=32 mm  Maximum door weight=50 kg  Weight=2.2 kg
  17. Trend D/LIFT/A Door lifter
    £20.36 Excl. VAT £24.43 Incl. VAT

    Weight=303 g  Lifts to height=38 mm  Maximum door weight=108 kg  Size=254 mm x 44 mm x 75 mm
  18. Trend D/LIFT/B Door & board lifter swivel type
    £22.44 Excl. VAT £26.93 Incl. VAT

    Lifts to height=60 mm  Maximum door weight=75 kg  Size=315 mm x 80 mm x 80 mm  Weight=688 g
  19. Trend CASE/HJ/A Fabric carry case for H/JIG/A
    £24.70 Excl. VAT £29.64 Incl. VAT

    Length outside=1250 mm  Height outside=160 mm
  20. Trend CASE/HJ/C Fabric carry case for H/JIG/C
    £24.70 Excl. VAT £29.64 Incl. VAT

    Out of stock

    Length outside=1325mm  Height outside=160 mm
  21. Trend CRB/CR CRB cranked rods

    Trend CRB/CR CRB cranked rods

    Combination router base cranked rods

    £23.23 Excl. VAT £27.88 Incl. VAT

    Diameter=7 mm  Rod centres=60.3 mm to 174 mm
  22. Trend CRB/SF CRB side fence

    Trend CRB/SF CRB side fence

    Combination router base side fence

    £20.36 Excl. VAT £24.43 Incl. VAT

    Length=270 mm  Width=35 mm  Thickness=15 mm  Cutter diameter max.=30 mm
  23. Trend BS/JIG Belfast sink jig
    £100.58 Excl. VAT £120.70 Incl. VAT

    Length= 655 mm  Width= 600 mm  Thickness=12 mm  Weight=3.6kg
  24. Trend BSJ/PIN/4 BS/JIG 10mm pin pack of 4
    £10.88 Excl. VAT £13.06 Incl. VAT

    D=10 mm
  25. Trend CDJ300 Craft Dovetail Jig 300mm
    £164.64 Excl. VAT £197.57 Incl. VAT

    Rating=Craftsman  Dovetail size=12.7 mm  Workpiece width max.=300 mm  Workpiece thickness min.=12 mm  Workpiece thickness max.=25 mm  Guide bush size=15.8 mm  Router base dia. max=180 mm

Back top top

51-75 of 113

Contact Us